Fei Li 
- (2024): Micro-Process of Open Innovation in Megaprojects Under Sense-Making Perspective. In: Buildings, v. 14, n. 11 (22 Oktober 2024).
- (2024): Measurement of interlaminar shear properties of pultruded CFRP composites based on modified DNS specimens. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2023): Stress-induced collapse in horizontally layered rock and a yielding support strategy: A case study. In: Tunnelling and Underground Space Technology, v. 142 (Dezember 2023).
- (2023): Multi-scale analysis method for composite-metal hybrid truss nodes using the MPC-submodel approach. In: Structures, v. 58 (Dezember 2023).
- (2023): Machine learning and remote sensing integration for leveraging urban sustainability: A review and framework. In: Sustainable Cities and Society, v. 96 (September 2023).
- (2022): Load distribution of composite pre-tightened teeth connections embedded with soft layers. In: Composite Structures, v. 300 (November 2022).
- (2022): Study of the Convective Heat Transfer Coefficient of Different Building Envelope Exterior Surfaces. In: Buildings, v. 12, n. 6 (7 Juni 2022).
- (2022): Study on the cooling performance of a radiative cooling-based ventilated roof for its application in buildings. In: Building Services Engineering Research and Technology, v. 43, n. 6 (August 2022).
- (2022): Locating a time-varying contaminant source in naturally ventilated indoor environments: An experimental study to find effective multi-robot olfaction methods. In: Building and Environment, v. 216 (Mai 2022).
- (2022): Reconstruction of airflow path parameters in multizone models based on Bayesian inference and measured data. In: Building and Environment, v. 209 (Februar 2022).
- (2022): Theoretical evaluation of the equivalent torsional rigidity of a unique GFRP-metal box-truss composite girder. In: Structures, v. 36 (Februar 2022).
- (2021): Temperature-dependent mechanical properties of polyetherimide composites reinforced by graphene oxide-coated short carbon fibers. In: Composite Structures, v. 270 (August 2021).
- (2021): Performance evaluation of make-up air systems for pollutant removal from gas stove in residential kitchen by using a push-pull ventilation system. In: Energy and Buildings, v. 240 (Juni 2021).
- (2018): Synthesis of Ferrate(VI) in Two Cathodes and One Anode Cell: Enhanced Efficiency and Treatment of Thiocyanate in Wastewater. In: Journal of Environmental Engineering (ASCE), v. 144, n. 10 (Oktober 2018).
- (2021): Research on the Algorithm for Composite Lining of Deep Buried Water Conveyance Tunnel. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2018): Locating time-varying contaminant sources in 3D indoor environments with three typical ventilation systems using a multi-robot active olfaction method. In: Building Simulation, v. 11, n. 3 (März 2018).
- (2019): A numerical investigation on the mixing factor and particle deposition velocity for enclosed spaces under natural ventilation. In: Building Simulation, v. 12, n. 3 (März 2019).
- (2020): Solutions to mitigate the impact of measurement noise on the air pollution source strength estimation in a multi-zone building. In: Building Simulation, v. 13, n. 6 (August 2020).
- (2020): Sub-ambient radiative cooling and its application in buildings. In: Building Simulation, v. 13, n. 6 (August 2020).
- (2015): Measuring and containing longitudinal flow: Important for airborne pollutants control in an aircraft cabin. In: Science and Technology for the Built Environment, v. 21, n. 8 (November 2015).
- (2019): Non-intrusive measurement method for the window opening behavior. In: Energy and Buildings, v. 197 (August 2019).
- (2016): A prediction method of the failure load and failure mode for composite pre-tightened tooth connections based on the characteristic lengths. In: Composite Structures, v. 154 (Oktober 2016).
- (2010): Prediction of tensile capacity based on cohesive zone model of bond anchorage for fiber-reinforce dpolymer tendon. In: Composite Structures, v. 92, n. 10 (September 2010).
- (2020): Seismic Behavior and Finite Element Analysis of Reinforced Concrete Short Columns Impacted by Oblique Earthquakes. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2019): Source localization in dynamic indoor environments with natural ventilation: An experimental study of a particle swarm optimization-based multi-robot olfaction method. In: Building and Environment, v. 161 (August 2019).
- (2019): An improved particle swarm optimization method for locating time-varying indoor particle sources. In: Building and Environment, v. 147 (Januar 2019).
- (2018): Influence of opening and closing process of sliding door on interface airflow characteristic in operating room. In: Building and Environment, v. 144 (Oktober 2018).
- (2018): Predicting contaminant dispersion using modified turbulent Schmidt numbers from different vortex structures. In: Building and Environment, v. 130 (Februar 2018).
- (2019): Strength Prediction of a Single Tooth Bound to Composite Pre-tightened Tooth Connection (PTTC) Joints based on Different Failure Criteria. In: KSCE Journal of Civil Engineering, v. 23, n. 8 (Juli 2019).
- (2017): A novel fast model predictive control with actuator saturation for large-scale structures. In: Computers & Structures, v. 187 (15 Juli 2017).
Structurae kooperiert mit
