Bo Li 
- (2024): Optimization of slow-release salt storage snowmelt aggregate preparation process and its slow-release performance based on response surface methodology-orthogonal test. In: Construction and Building Materials, v. 449 (Oktober 2024).
- (2024): Polyaluminum enhanced dehydrated cement paste activated slag: Mechanical performance and microstructural analysis. In: Journal of Building Engineering, v. 95 (Oktober 2024).
- (2024): Prediction model for high arch dam stress during the operation period using LightGBM with MSSA and SHAP. In: Advances in Engineering Software, v. 192 (Juni 2024).
- (2018): Performance of steel plate shear walls with axially loaded vertical boundary elements. In: Thin-Walled Structures, v. 125 (April 2018).
- (2023): Promoting the dissolution of slag in blended cement via adding polyaluminum sulfate and controlling the inner spatial zonation. In: Construction and Building Materials, v. 399 (Oktober 2023).
- (2023): Punching shear strength model of reinforced concrete footing considering bilinear contact stress on subgrade. In: Engineering Structures, v. 285 (Juni 2023).
- (2023): Parametric study on seismic demand assessment of acceleration-sensitive nonstructural components of RC frames. In: Structures, v. 47 (Januar 2023).
- (2023): Prediction and evaluation of air conditioner energy consumption of residential buildings in the Yangtze River Basin. In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Physicochemical and Mechanical Behavior of the One-Part Geopolymer Paste Exposed to Hydrochloric and Sulfuric Acids. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 3 (März 2023).
- (2023): Prediction Model on Permeability Coefficient of Porous Asphalt Concrete under Repeated Clogging Based on Void Characteristic Parameters. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 5 (Mai 2023).
- (2023): The Properties of Sodium-Hypochlorite-Activated Crumb Rubber and the Influence of Aging on the Rheological Properties of Activated Asphalt Rubber. In: Buildings, v. 13, n. 3 (26 Februar 2023).
- (2022): Optimization of surface free energy parameters for asphalt binder-aggregate system based on RBF neural network model. In: Construction and Building Materials, v. 357 (November 2022).
- (2022): Quantitative analysis method for the importance of stress influencing factors of a high arch dam during the operation period using SPA–OSC–PLS. In: Structural Control and Health Monitoring, v. 29, n. 11 (September 2022).
- (2022): Properties and microstructure of packing-optimised recycled aggregate concrete with different cement paste or sand contents. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Numerical study on flexural behaviour of FRP reinforced concrete beams with compression yielding blocks. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2021): Performance evaluation and adaptability optimization of hot mix asphalt reinforced by mixed lengths basalt fibers. In: Construction and Building Materials, v. 292 (Juli 2021).
- (2018): Numerical simulation of nonlinear structural responses of an arch dam to an underwater explosion. In: Engineering Failure Analysis, v. 91 (September 2018).
- (2022): Relocating plastic hinges in reinforced concrete beam-column joints by mechanically anchored diagonal bars. In: Engineering Structures, v. 251 (Januar 2022).
- (2021): Recycling sediment, calcium carbide slag and ground granulated blast-furnace slag into novel and sustainable cementitious binder for production of eco-friendly mortar. In: Construction and Building Materials, v. 305 (Oktober 2021).
- (2008): Research on Fatigue Reliability of Cables of Partially Cable-stayed Bridge under Vehicle Load. In: Journal of Highway and Transportation Research and Development (English Edition), v. 3, n. 1 (Juli 2008).
- (2019): Punching shear strength of reinforced concrete column footings under eccentric compression: Experiment and analysis. In: Engineering Structures, v. 198 (November 2019).
- (2020): Numerical Analysis on the Performance of the Underwater Excavation. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2017): Progressive damage simulation in 3D four-directional braided composites considering the jamming-action-induced yarn deformation. In: Composite Structures, v. 178 (Oktober 2017).
- (2020): Permeability evolution of grout infilled fractures subjected to triaxial compression with low confining pressure. In: Tunnelling and Underground Space Technology, v. 104 (Oktober 2020).
- (2018): Probabilistic seismic hazard analysis considering site-specific soil effects. In: Soil Dynamics and Earthquake Engineering, v. 105 (Februar 2018).
- (2019): Optimum design of a non-conventional multiple tuned mass damper for a complex power plant structure. In: Structure and Infrastructure Engineering, v. 15, n. 7 (Mai 2019).
- (2008): Properties evaluation of asphalt-based composites with graphite and mine powders. In: Construction and Building Materials, v. 22, n. 3 (März 2008).
- (2018): Pore Damage Properties and Permeability Change of Coal Caused by Freeze-Thaw Action of Liquid Nitrogen. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Research on Gas Exploration Shock Wave Spread Law via One-Way Bifurcation Pipeline. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2019): Performance of a heat recovery ventilator coupled with an air-to-air heat pump for residential suites in Canadian cities. In: Journal of Building Engineering, v. 21 (Januar 2019).
Structurae kooperiert mit
