M. Tyler Ley
- (2024): Publisher Correction: Determining the air-entraining admixture dosage in concrete with non-traditional coal ash. In: Materials and Structures, v. 57, n. 3 (5 März 2024).
- (2023): Impacts of Fine Aggregate Gradation on the Workability of Slip-Formed Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (Oktober 2023).
- (2023): Impact of Early Formwork Removal on Concrete Drying and Chloride Ion Diffusion. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 7 (Juli 2023).
- (2023): Measuring damaging Freeze-Thaw cycles in the field. In: Construction and Building Materials, v. 387 (Juli 2023).
- (2020): Predicting the compressive strength of fly ash concrete with the Particle Model. In: Cement and Concrete Research, v. 137 (November 2020).
- (2017): Imaging the presence of silane coatings in concrete with micro X-ray fluorescence. In: Cement and Concrete Research, v. 92 (Februar 2017).
- (2021): Air entraining admixtures: Mechanisms, evaluations, and interactions. In: Cement and Concrete Research, v. 150 (Dezember 2021).
- (2016): Direct three-dimensional observation of the microstructure and chemistry of C3S hydration. In: Cement and Concrete Research, v. 88 (Oktober 2016).
- (2009): The physical and chemical characteristics of the shell of air-entrained bubbles in cement paste. In: Cement and Concrete Research, v. 39, n. 5 (Mai 2009).
- (2023): Determining the air-entraining admixture dosage in concrete with non-traditional coal ash. In: Materials and Structures, v. 56, n. 1 (30 Januar 2023).
- (2023): Direct observation of C3S particles greater than 10 μm during early hydration. In: Construction and Building Materials, v. 369 (März 2023).
- (2022): Performance and prediction of non-traditional coal-ash in concrete with the Particle Model. In: Construction and Building Materials, v. 345 (August 2022).
- (2021): Determining the air void efficiency of fresh concrete mixtures with the Sequential air method. In: Construction and Building Materials, v. 288 (Juni 2021).
- (2022): Measuring the Change in Water-to-Cement Ratio in Fresh and Hardened Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 4 (April 2022).
- (2022): Increasing sustainable aggregate usage in concrete by quantifying the shape and gradation of manufactured sand. In: Construction and Building Materials, v. 321 (Februar 2022).
- (2021): Development of time and temperature testing limits for a field water-to-cement ratio test. In: Materials and Structures, v. 54, n. 4 (2 Juli 2021).
- (2021): Predicting ion diffusion in fly ash cement paste through particle analysis. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2020): Determining the water to cement ratio of fresh concrete by evaporation. In: Construction and Building Materials, v. 242 (Mai 2020).
- (2018): Fly ash particle characterization for predicting concrete compressive strength. In: Construction and Building Materials, v. 165 (März 2018).
- (2018): Quantitative measurements of curing methods for concrete bridge decks. In: Construction and Building Materials, v. 162 (Februar 2018).
- (2018): Dissolution and Leaching of Fly Ash in Nitric Acid Using Automated Scanning Electron Microscopy. In: Advances in Civil Engineering Materials, v. 7, n. 1 (Dezember 2018).
- (2019): Multi-scale observations of structure and chemical composition changes of portland cement systems during hydration. In: Construction and Building Materials, v. 212 (Juli 2019).
- (2016): Effects of Aggregate Concepts on the Workability of Slip-Formed Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 10 (Oktober 2016).
- (2014): Determining Efficient Strut-and-Tie Models for Simply Supported Beams Using Minimum Strain Energy. In: ACI Structural Journal, v. 111, n. 5 (September 2014).
- (2016): Determining the effective service life of silane treatments in concrete bridge decks. In: Construction and Building Materials, v. 116 (Juli 2016).
- (2016): Physical and chemical characteristics of fly ash using automated scanning electron microscopy. In: Construction and Building Materials, v. 106 (März 2016).
- (2017): Quantitative measurement of the influence of degree of saturation on ion penetration in cement paste by using X-ray imaging. In: Construction and Building Materials, v. 141 (Juni 2017).
- (2017): Determining the air-void distribution in fresh concrete with the Sequential Air Method. In: Construction and Building Materials, v. 150 (September 2017).
- (2016): The impact of wet curing on curling in concrete caused by drying shrinkage. In: Materials and Structures, v. 49, n. 5 (Mai 2016).
- (2018): Impacts of Coarse-Aggregate Gradation on the Workability of Slip-Formed Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 2 (Februar 2018).
Structurae kooperiert mit
