0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

C. Lee

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Lee, C. / Kim, H. (2010): Orientation factor and number of fibers at failure plane in ring-type steel fiber reinforced concrete. In: Cement and Concrete Research, v. 40, n. 5 (Mai 2010).

    https://doi.org/10.1016/j.cemconres.2009.11.009

  2. Lee, S. / Shin, S. / Lee, C. (2020): Prediction of Transfer Lengths Inclusive of Conventional and High-Strength Strands. In: Journal of Structural Engineering (ASCE), v. 146, n. 9 (September 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002765

  3. Shin, S. / Choi, Y. / Lee, C.: Modeling of Compressive Stress-Strain Relationships of GPCC with FA Blended with GGBFS. In: Magazine of Concrete Research.

    https://doi.org/10.1680/jmacr.19.00065

  4. Heo, G. / Kim, C. / Lee, C. (2014): Experimental test of asymmetrical cable-stayed bridges using MR-damper for vibration control. In: Soil Dynamics and Earthquake Engineering, v. 57 (Februar 2014).

    https://doi.org/10.1016/j.soildyn.2013.10.007

  5. Heo, G. / Kim, C. / Jeon, S. / Lee, C. / Seo, S. (2017): A study on a MR damping system with lumped mass for a two-span bridge to diminish its earthquake-induced longitudinal vibration. In: Soil Dynamics and Earthquake Engineering, v. 92 (Januar 2017).

    https://doi.org/10.1016/j.soildyn.2016.10.004

  6. Shin, S. / Goh, G. / Lee, C. (2019): Predictions of compressive strength of GPC blended with GGBFS developed at varying temperatures. In: Construction and Building Materials, v. 206 (Mai 2019).

    https://doi.org/10.1016/j.conbuildmat.2019.01.181

  7. Lee, C. / Lee, S. / Shin, S. (2016): Shear Capacity of RC Beams with Carbon Fiber-Reinforced Polymer Stirrups with Rectangular Section. In: Journal of Composites for Construction, v. 20, n. 4 (August 2016).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000653

  8. Lee, C. / Ko, M. / Lee, Y. (2014): Bend Strength of Complete Closed-Type Carbon Fiber-Reinforced Polymer Stirrups with Rectangular Section. In: Journal of Composites for Construction, v. 18, n. 1 (Februar 2014).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000428

  9. Heo, S. / Shin, S. / Lee, C. (2013): Flexural Behavior of Concrete Beams Internally Prestressed with Unbonded Carbon-Fiber-Reinforced Polymer Tendons. In: Journal of Composites for Construction, v. 17, n. 2 (April 2013).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000306

  10. Choo, H. / Lim, S. / Lee, W. / Lee, C. (2016): Compressive strength of one-part alkali activated fly ash using red mud as alkali supplier. In: Construction and Building Materials, v. 125 (Oktober 2016).

    https://doi.org/10.1016/j.conbuildmat.2016.08.015

  11. Lim, S. / Lee, W. / Choo, H. / Lee, C. (2017): Utilization of high carbon fly ash and copper slag in electrically conductive controlled low strength material. In: Construction and Building Materials, v. 157 (Dezember 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.09.071

  12. Fragaszy, R. J. / Santamarina, J. C. / Amekudzi, A. / Assimaki, D. / Bachus, R. / Burns, S. E. / Cha, M. / Cho, G. C. / Cortes, D. D. / Dai, S. / Espinoza, D. N. / Garrow, L. / Huang, H. / Jang, J. / Jung, J. W. / Kim, S. / Kurtis, K. / Lee, C. / Pasten, C. / Phadnis, H. / Rix, G. / Shin, H. S. / Torres, M. C. / Tsouris, C. (2011): Sustainable development and energy geotechnology — Potential roles for geotechnical engineering. In: KSCE Journal of Civil Engineering, v. 15, n. 4 (April 2011).

    https://doi.org/10.1007/s12205-011-0102-7

  13. Lee, C. / Shin, S. / Lee, H. (2017): Balanced Ratio of Concrete Beams Internally Prestressed with Unbonded CFRP Tendons. In: International Journal of Concrete Structures and Materials, v. 11, n. 1 (Februar 2017).

    https://doi.org/10.1007/s40069-016-0171-6

  14. Lee, S. / Lee, C. (2013): Fire resistance of reinforced concrete bearing walls subjected to all-sided fire exposure. In: Materials and Structures, v. 46, n. 6 (Juni 2013).

    https://doi.org/10.1617/s11527-012-9945-8

  15. Lee, C. / Park, J. Y. / Lee, Johanna / Choi, O. C. (2013): Comparative structural performance of amorphous steel fibre reinforced concrete slabs on grade. In: Magazine of Concrete Research, v. 65, n. 8 (April 2013).

    https://doi.org/10.1680/macr.12.00154

  16. Lee, C. / Jeong, S. M. / Park, J. W. (2009): Use of fibre sheet strip stirrups for internal shear reinforcement of concrete beams. In: Magazine of Concrete Research, v. 61, n. 9 (November 2009).

    https://doi.org/10.1680/macr.2008.61.9.731

  17. Lee, S. / Lee, C. (2014): Prediction of shear strength of FRP-reinforced concrete flexural members without stirrups using artificial neural networks. In: Engineering Structures, v. 61 (März 2014).

    https://doi.org/10.1016/j.engstruct.2014.01.001

  18. Lee, C. / Bonacci, J. F. / Thomas, M. D. A. / Maalej, M. / Khajehpour, S. / Hearn, N. / Pantazopoulou, S. / Sheikh, S. (2000): Accelerated corrosion and repair of reinforced concrete columns using carbon fibre reinforced polymer sheets. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 27, n. 5 (Oktober 2000).

    https://doi.org/10.1139/l00-030

  19. Lee, C. / Ahn, J. (2003): Flexural Design of Reinforced Concrete Frames by Genetic Algorithm. In: Journal of Structural Engineering (ASCE), v. 129, n. 6 (Juni 2003).

    https://doi.org/10.1061/(asce)0733-9445(2003)129:6(762)

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine