0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Akimitsu Kurita

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Akao, Shinsuke / Kurita, Akimitsu / Hiragi, Hirokazu (1987): Effect Of Directions Of Concrete Placing On Behavior Of Headed Stud Shear Connectors In Push-out Tests. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1987, n. 380 (April 1987).

    https://doi.org/10.2208/jscej.1987.380_311

  2. Kurita, Akimitsu / Nakai, Hiroshi (1992): An Analysis For Long-term Behavior of Steel-concrete Composite Girders By Taking Into Account of Creep Recovery. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1992, n. 450 ( 1992).

    https://doi.org/10.2208/jscej.1992.450_29

  3. Nakai, Hiroshi / Kurita, Akimitsu / Kamei, Masahiro / Seno, Yasuhisa (1992): Construction Of Continuous Composite Girder Bridge By Using Prestressed Precast Concrete Slabs And Evaluation Of Creep As Well As Shrinkage Behaviors. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1992, n. 453 (September 1992).

    https://doi.org/10.2208/jscej.1992.453_117

  4. Ohyama, Osamu / Kurita, Akimitsu (2001): Influence Of Creep Behavior In Steel-concrete Double Composite Continuous Box Girder Bridges. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2001, n. 668 (Januar 2001).

    https://doi.org/10.2208/jscej.2001.668_103

  5. Tsutsumishita, Takashi / Kurita, Akimitsu / Tokuoka, Fumiaki (2004): Study On Strengthening Method Of Damaged Reinforced Concrete Bridge Slabs By Using Methyl Meta Acrilate (mma) Resin Concrete With Carbon Fiber Sheets (cfs). In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2004, n. 774 (November 2004).

    https://doi.org/10.2208/jscej.2004.774_1

  6. Okubo, Nobuhito / Kurita, Akimitsu (2005): Application Of Grouped Studs To Continuous Composite Girder Bridges. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2005, n. 780 ( 2005).

    https://doi.org/10.2208/jscej.2005.780_133

  7. Maeda, Yukio / Matsui, Shigeyuki / Kurita, Akimitsu (1982): Rating and evaluation of first-built composite girder bridge in Japan. Vorgetragen bei: IABSE Symposium: Maintenance, Repair and Rehabilitation of Bridges = Entretien, réparation et modification des ponts = Unterhaltung, Instandsetzung und Sanierung von Brücken, Washington, DC (USA), 1982.

    https://doi.org/10.5169/seals-30170

  8. Kurita, Akimitsu / Ueda, Takashi / Takehara, Yasutaka (1997): Ultimate strength and ductility in concrete-filled double steel tubular columns. Vorgetragen bei: International Conference: Composite Construction - Conventional and Innovative, Innsbruck, Austria, 16-18 September 1997.

    https://doi.org/10.5169/seals-1109

  9. Yanagisawa, Norifumi / Echigo, Shigeru / Ohyama, Osamu / Kurita, Akimitsu (2012): Fire Protection Panel for Bridges. Vorgetragen bei: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.

    https://doi.org/10.2749/222137912805112004

  10. Imagawa, Yusuke / Ohyama, Osamu / Kurita, Akimitsu (2009): Design of Fire Protection for Steel Girder Bridges. Vorgetragen bei: IABSE Symposium: Sustainable Infrastructure - Environment Friendly, Safe and Resource Efficient, Bangkok, Thailand, 9-11 September 2009.

    https://doi.org/10.2749/222137809796088198

  11. Yanagisawa, Norifumi / Imagawa, Yusuke / Ohyama, Osamu / Rutner, Marcus / Kurita, Akimitsu (2017): Fire safety of bridges - methodology supporting design and forensic evaluation. In: Steel Construction, v. 10, n. 1 (Januar 2017).

    https://doi.org/10.1002/stco.201710002

  12. Imagawa, Yusuke / Ohyama, Osamu / Kurita, Akimitsu (2012): Mechanical Properties of Shear Stud during and after Fire. In: Structural Engineering International, v. 22, n. 4 (November 2012).

    https://doi.org/10.2749/101686612x13363929517532

  13. Iwasaki, Nobumasa / Tenma, Shinji / Kurita, Akimitsu (2011): Portal Frame Bridges in Japan: State of the Art Report. In: Structural Engineering International, v. 21, n. 3 (August 2011).

    https://doi.org/10.2749/101686611x12994961034093

  14. Albrecht, Gert / Rutner, Marcus / Kurita, Akimitsu / Ohyama, Osamu (2004): Modifikation des DIN-Fachberichtes 104 hinsichtlich der Berechnung des Langzeit-Tension Stiffening. In: Stahlbau, v. 73, n. 9 (September 2004).

    https://doi.org/10.1002/stab.200490165

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine