0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

TaeSoo Kim ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Lee, Dongkeun / Kim, Jinwoo / Lee, KangSeok / Kim, TaeSoo: Experimental and Numerical Study on Behaviors of Double-shear Four-Bolted Connection with Austenitic Stainless Steel. In: International Journal of Steel Structures.

    https://doi.org/10.1007/s13296-024-00878-9

  2. Cho, Yonghyun / Kim, TaeSoo (2016): Estimation of ultimate strength in single shear bolted connections with aluminum alloys (6061-T6). In: Thin-Walled Structures, v. 101 (April 2016).

    https://doi.org/10.1016/j.tws.2015.11.017

  3. Wang, Yi-Sheng / Kim, TaeSoo / Lin, Run-Sheng / Li, Jiabin / Wang, Xiao-Yong (2024): Improved high-temperature resistance of limestone calcined clay cement (LC3) paste with biochar: Multiscale evaluation and mechanistic analysis. In: Developments in the Built Environment, v. 18 (April 2024).

    https://doi.org/10.1016/j.dibe.2024.100403

  4. Kim, Jinwoo / Kim, Taehoon / Park, HaeYong / Kim, TaeSoo (2024): Experimental Study on Indentation Behavior of U-Type Section Steel Piling. In: International Journal of Steel Structures, v. 24, n. 1 (Januar 2024).

    https://doi.org/10.1007/s13296-023-00796-2

  5. Han, Yi / Yang, Bo / Meng, Li-Yi / Oh, Seokhoon / Kim, TaeSoo / Wang, Xiao-Yong (2024): Innovative use of wet carbon conversion in alkali-activated slag: Improved microstructures and mechanical characteristics. In: Construction and Building Materials, v. 411 (Januar 2024).

    https://doi.org/10.1016/j.conbuildmat.2023.134487

  6. Kang, HyunSik / Kim, TaeSoo (2023): 세장판요소를 갖는 스테인리스강 각형강관 압축재의 좌굴내력에 관한 실험적 연구 (Experimental Study on Buckling Strength of Cold-Formed Stainless Steel SHS Compression Members with Slender Section). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 35, n. 6 (27 Dezember 2023).

    https://doi.org/10.7781/kjoss.2023.35.6.347

  7. Guo, Yi / Hwang, BoKyung / Ryu, HongSik / Kim, Youngju / Kim, TaeSoo (2023): 저항복강 강판전단벽 골조의 구조거동에 관한 해석적 연구 (Numerical Study on Structural Behaviors of Low-Yield Point Steel Plate Shear Wall). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 35, n. 6 (27 Dezember 2023).

    https://doi.org/10.7781/kjoss.2023.35.6.335

  8. Han, Yi / Lin, Run-Sheng / Kim, TaeSoo / Joh, Sung Hyung / Yang, Hyun-Min / Wang, Xiao-Yong (2023): Optimum design of the quaternary composite binder considering strength, cost, and electrical resistivity. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).

    https://doi.org/10.1016/j.cscm.2023.e02623

  9. Cho, Yonghyun / Kim, TaeSoo / Kim, Jinwoo (2023): Effects of material property and thickness on block shear strength in lean duplex stainless steel welded connections. In: Advances in Structural Engineering, v. 26, n. 14 (15 September 2023).

    https://doi.org/10.1177/13694332231199533

  10. Kim, Jinwoo / Park, HaeYong / Kim, Taehoon / Kim, TaeSoo (2023): Experimental Study on the Tensile Behavior of Interlocks on U-Type Section Steel Piling. In: International Journal of Steel Structures, v. 23, n. 5 (16 September 2023).

    https://doi.org/10.1007/s13296-023-00775-7

  11. Hwang, BoKyung / Kim, TaeSoo / Kim, Youngju / Kim, Jinwon (2022): A comparative study on hysteretic characteristics of austenitic stainless steel and carbon steel slit dampers under cyclic loading. In: Journal of Building Engineering, v. 45 (Januar 2022).

    https://doi.org/10.1016/j.jobe.2021.103553

  12. Cho, Yonghyun / Kim, TaeSoo / Kim, JunSu / Lee, Dongkeun (2021): Block Shear Strength of Double-Lap Welded Connections in Mild Carbon Steel Plate. In: International Journal of Steel Structures, v. 21, n. 5 (September 2021).

    https://doi.org/10.1007/s13296-021-00541-7

  13. Kim, JunSu / Cho, Yonghyun / Kim, TaeSoo (2021): Recommendation on block shear strength equation of double shear four-bolted connection in cold-formed mild carbon steel. In: Structures, v. 33 (Oktober 2021).

    https://doi.org/10.1016/j.istruc.2021.06.078

  14. Kim, RiHa / Kim, TaeSoo / Im, SeHyeok / Xi, Yunping (2021): Hysteretic behavior comparison of austenitic and lean duplex stainless steel square hollow section members under cyclic axial loading. In: Engineering Structures, v. 237 (Juni 2021).

    https://doi.org/10.1016/j.engstruct.2021.112227

  15. Kim, TaeSoo / Hwang, BoKyung / Lim, YoungChul (2020): Development on ultimate strength equation of ferritic stainless steel (STS430) two-bolted connection. In: Advances in Structural Engineering, v. 23, n. 6 (April 2020).

    https://doi.org/10.1177/1369433219891592

  16. Kim, TaeSoo / Yoo, JungHan / Roeder, Charles W. (2015): Experimental investigation on strength and curling influence of bolted connections in thin-walled carbon steel. In: Thin-Walled Structures, v. 91 (Juni 2015).

    https://doi.org/10.1016/j.tws.2015.01.016

  17. Lee, HooChang / Hwang, BoKyung / Kim, TaeSoo (2017): Ultimate strength of austenitic stainless steel fillet-welded connections with weld metal fracture. In: Thin-Walled Structures, v. 116 (Juli 2017).

    https://doi.org/10.1016/j.tws.2017.03.008

  18. Hwang, BoKyung / Kim, TaeSoo (2019): An Investigation on Ultimate Strength of High Strength Aluminum Alloys Four-Bolted Connections with Out-of-plane Deformation. In: International Journal of Steel Structures, v. 19, n. 4 ( 2019).

    https://doi.org/10.1007/s13296-018-0195-7

  19. Lee, HooChang / Kim, TaeSoo / Hwang, BoKyung / Cho, TaeJun (2018): Investigation on Ultimate Strength of STS304L Stainless Steel Welded Connection with Base Metal Fracture Using Finite Element Analysis. In: International Journal of Steel Structures, v. 18, n. 4 ( 2018).

    https://doi.org/10.1007/s13296-018-0072-4

  20. Kim, TaeSoo / Jeong, HaYoung / Cho, TaeJun (2011): The finite element analysis of the ultimate behavior of thin-walled carbon steel bolted connections. In: Journal of Constructional Steel Research, v. 67, n. 7 (Juli 2011).

    https://doi.org/10.1016/j.jcsr.2011.01.004

  21. Kim, TaeSoo / Kim, MinSeong / Cho, TaeJun (2015): Strength of channel bolted connection with austenitic stainless steel (304 type). In: International Journal of Steel Structures, v. 15, n. 3 ( 2015).

    https://doi.org/10.1007/s13296-015-9017-3

  22. Kim, TaeSoo / Lim, JinSeong (2013): Ultimate strength of single shear two-bolted connections with austenitic stainless steel. In: International Journal of Steel Structures, v. 13, n. 1 ( 2013).

    https://doi.org/10.1007/s13296-013-1011-z

  23. Kim, TaeSoo / Kim, MinSeong / Cho, TaeJun (2018): Parametric Study on Ultimate Strength of Four-bolted Connections with Cold-formed Carbon Steel. In: International Journal of Steel Structures, v. 18, n. 1 ( 2018).

    https://doi.org/10.1007/s13296-018-0320-7

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine