Taehwan Kim 
- (2023): A comprehensive review on self-healing cementitious composites with crystalline admixtures: Design, performance and application. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Mechanism of PVA Fiber Influence in Foam Concrete: From Macroscopic to Microscopic View. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (Dezember 2023).
- (2023): Distinct Effect of Hydration of Calcined Kaolinitic Clay–Limestone Blended Cement on Microstructure and Autogenous Shrinkage. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (Dezember 2023).
- (2023): Unveiling the underlying mechanisms of tensile behaviour enhancement in fibre reinforced foam concrete. In: Construction and Building Materials, v. 398 (September 2023).
- (2023): Cracking of limestone calcined clay blended concrete and mortar under restrained shrinkage. In: Construction and Building Materials, v. 386 (Juli 2023).
- (2021): Performance of fly ash concrete with ferronickel slag fine aggregate against alkali-silica reaction and chloride diffusion. In: Cement and Concrete Research, v. 139 (Januar 2021).
- (2020): Predicting the compressive strength of fly ash concrete with the Particle Model. In: Cement and Concrete Research, v. 137 (November 2020).
- (2016): Direct three-dimensional observation of the microstructure and chemistry of C3S hydration. In: Cement and Concrete Research, v. 88 (Oktober 2016).
- (2015): Alkali–silica reaction: Kinetics of chemistry of pore solution and calcium hydroxide content in cementitious system. In: Cement and Concrete Research, v. 71 (Mai 2015).
- (2022): Quantitative description of the effect of slag surface area on its reaction kinetics in sodium silicate-activated materials. In: RILEM Technical Letters, v. 7 (August 2022).
- (2023): Shrinkage of blended cement concrete with fly ash or limestone calcined clay. In: Materials and Structures, v. 56, n. 1 (30 Januar 2023).
- (2022): Evaluation of cracking potential parameters for low to high grade concrete with fly ash or slag. In: Construction and Building Materials, v. 350 (Oktober 2022).
- (2023): Modeling blended cement concrete tensile creep for standard ring test application. In: Structural Concrete, v. 24, n. 2 (April 2023).
- : Autogenous Shrinkage of Fly Ash and GGBFS Concrete. In: Magazine of Concrete Research.
- (2022): The efficiency of recycled glass powder in mitigating the alkali-silica reaction induced by recycled glass aggregate in cementitious mortars. In: Materials and Structures, v. 55, n. 6 (26 Juni 2022).
- (2022): Durability performance of binary and ternary blended cementitious systems with calcined clay: a RILEM TC 282 CCL review. In: Materials and Structures, v. 55, n. 5 (Juni 2022).
- (2022): Effect of limestone in General Purpose cement on autogenous shrinkage of high strength GGBFS concrete and pastes. In: Construction and Building Materials, v. 327 (April 2022).
- (2022): Autogenous and total shrinkage of limestone calcined clay cement (LC3) concretes. In: Construction and Building Materials, v. 314 (Januar 2022).
- (2021): Analytical model predicting the concrete tensile stress development in the restrained shrinkage ring test. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Analytical model to parameterize the adiabatic temperature rise of concrete. In: Construction and Building Materials, v. 268 (Januar 2021).
- (2020): Evolution of flow properties, plastic viscosity, and yield stress of alkali-activated fly ash/slag pastes. In: RILEM Technical Letters, v. 5 (Juni 2020).
- (2018): The influence of air cooled blast furnace slag (ACBFS) aggregate on the concentration of sulfates in concrete’s pore solution. In: Construction and Building Materials, v. 168 (April 2018).
- (2018): Fly ash particle characterization for predicting concrete compressive strength. In: Construction and Building Materials, v. 165 (März 2018).
- (2020): Effects of Air-Cooled Blast Furnace Slag Aggregate on Pore Solution Chemistry of Cementitious Systems. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 1 (Januar 2020).
- (2018): Dissolution and Leaching of Fly Ash in Nitric Acid Using Automated Scanning Electron Microscopy. In: Advances in Civil Engineering Materials, v. 7, n. 1 (Dezember 2018).
- (2019): Durability and Microstructure Properties of Low-Carbon Concrete Incorporating Ferronickel Slag Sand and Fly Ash. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 8 (August 2019).
- (2016): Physical and chemical characteristics of fly ash using automated scanning electron microscopy. In: Construction and Building Materials, v. 106 (März 2016).
Structurae kooperiert mit
