Shiho Kawashima 
- (2024): Maximizing fiber content in 3D-printed earth materials: Printability, mechanical, thermal and environmental assessments. In: Construction and Building Materials, v. 425 (April 2024).
- (2023): MgO-based cements – Current status and opportunities. In: RILEM Technical Letters, v. 8 (August 2023).
- (2023): Using Waste-to-Energy Fine-Combined Ash as Sand or Cement Substitute in Cement Mortar. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 11 (November 2023).
- (2023): Viscoelastic properties of fresh cement paste: measuring procedures and influencing parameters. In: RILEM Technical Letters, v. 8 (August 2023).
- (2021): Mechanisms dominating thixotropy in limestone calcined clay cement (LC3). In: Cement and Concrete Research, v. 140 (Februar 2021).
- (2016): Flow onset of fresh mortars in rheometers: Contribution of paste deflocculation and sand particle migration. In: Cement and Concrete Research, v. 90 (Dezember 2016).
- (2021): A review of the effect of nanoclays on the fresh and hardened properties of cement-based materials. In: Cement and Concrete Research, v. 147 (September 2021).
- (2013): Rate of thixotropic rebuilding of cement pastes modified with highly purified attapulgite clays. In: Cement and Concrete Research, v. 53 (November 2013).
- (2016): Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastes. In: Cement and Concrete Research, v. 90 (Dezember 2016).
- (2018): Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures. In: Cement and Concrete Research, v. 108 (Juni 2018).
- (2018): Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry. In: Cement and Concrete Research, v. 112 (Oktober 2018).
- (2022): Microfibrillated cellulose as a new approach to develop lightweight cementitious composites: Rheological, Mechanical, and microstructure perspectives. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Evaluation of Mechanical Performance of Compacted Magnesium Hydroxide after Carbonation Curing. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 5 (Mai 2022).
- (2022): Enhancing carbonation and strength of MgO cement through 3D printing. In: Construction and Building Materials, v. 328 (April 2022).
- (2022): Performance of Waste-to-Energy fine combined ash/filter cake ash-metakaolin based artificial aggregate. In: Construction and Building Materials, v. 327 (April 2022).
- (2013): Modification of cement-based materials with nanoparticles. In: Cement and Concrete Composites, v. 36 (Februar 2013).
- (2020): Analysis of flexural concrete beams prestressed with basalt composite bars. Analytical-experimental approach. In: Composite Structures, v. 243 (Juli 2020).
- (2018): Shrinkage characteristics and strength recovery of nanomaterials-cement composites. In: Composite Structures, v. 202 (Oktober 2018).
- (2018): Interfacial properties of nanosilica-treated structural polymer fibres in cement matrix composites. In: Composite Structures, v. 202 (Oktober 2018).
- (2020): Investigating the Working Mechanisms of Viscosity-Modifying Admixtures through Rheological and Water Transport Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 2 (Februar 2020).
- (2018): Performance-based study on the rheological and hardened properties of blended cement mortars incorporating palygorskite clays and carbon nanotubes. In: Construction and Building Materials, v. 171 (Mai 2018).
- (2019): Mechanisms Underlying Crystalline Waterproofing through Microstructural and Phase Characterization. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 9 (September 2019).
- (2019): A rheological approach to study the early-age hydration of oil well cement: Effect of temperature, pressure and nanoclay. In: Construction and Building Materials, v. 215 (August 2019).
- (2012): Interfacial transition zones in recycled aggregate concrete with different mixing approaches. In: Construction and Building Materials, v. 35 (Oktober 2012).
- (2012): Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays. In: Construction and Building Materials, v. 36 (November 2012).
- (2014): Dispersion of CaCO3 nanoparticles by sonication and surfactant treatment for application in fly ash–cement systems. In: Materials and Structures, v. 47, n. 6 (Juni 2014).
- (2016): Comparative investigation on nanomechanical properties of hardened cement paste. In: Materials and Structures, v. 49, n. 5 (Mai 2016).
Structurae kooperiert mit
