0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Ben Kato

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Kato, Ben / Nakamura, Yuji / Anraku, Hidetake (1972): Optimum Earthquake Design of Shear Buildings. In: Journal of the Engineering Mechanics Division (ASCE), v. 98, n. 4 (August 1972).

    https://doi.org/10.1061/jmcea3.0001644

  2. Kato, Ben / Akiyama, Hiroshi (1969): Inelastic Bar Subjected to Thrust and Cyclic Bending. In: Journal of the Structural Division (ASCE), v. 95, n. 1 (Januar 1969).

    https://doi.org/10.1061/jsdeag.0002175

  3. Kato, Ben / McGuire, William (1973): Analysis of T-Stub Flange-to-Column Connections. In: Journal of the Structural Division (ASCE), v. 99, n. 5 (Mai 1973).

    https://doi.org/10.1061/jsdeag.0003510

  4. Kato, Ben (1982): Beam-to-Column Connection Research in Japan. In: Journal of the Structural Division (ASCE), v. 108, n. 2 (Februar 1982).

    https://doi.org/10.1061/jsdeag.0005875

  5. Kato, Ben / Akiyama, Hiroshi (1982): Seismic Design of Steel Buildings. In: Journal of the Structural Division (ASCE), v. 108, n. 8 (August 1982).

    https://doi.org/10.1061/jsdeag.0006013

  6. Kato, Ben / Akiyama, Hiroshi / Yamanouchi, Yasuyuki (1973): Predictable properties of material under incremental cyclic loading. Vorgetragen bei: IABSE Symposium: Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Lisbon, Portugal, 1973.

    https://doi.org/10.5169/seals-13757

  7. Kato, Ben (1975): Reliability in welded joints trough ultrasonic inspection. Vorgetragen bei: IABSE Symposium: Structures en acier et mixtes conçues pour l'usage = Nutzungsgerechtes Bauen im Stahl- und Stahlverbundbau = Steel and Composite Structures for User Needs, Dresden, East Germany, 1975.

    https://doi.org/10.5169/seals-19374

  8. Kato, Ben (1975): Column buckling curve of welded steel tube. Vorgetragen bei: IABSE - ECCS - Column Research Committee of Japan - Column Research Council: International Colloqium on Column Strength, Paris, France, 23-24 November 1972.

    https://doi.org/10.5169/seals-19815

  9. Kato, Ben / Takanashi, Koichi / Tanaka, Atsuo (1983): Strengthening of steel buildings against earthquakes. Vorgetragen bei: IABSE Symposium: Strengthening of building structures - Diagnosis and Therapy = Renforcement des structures de bâtiment - Diagnostic et thérapie = Verstärkung von Bauwerken - Diagnose und Behandlung, Venice, Italy, 1983.

    https://doi.org/10.5169/seals-35878

  10. Fukumoto, Toshiyuki / Kato, Ben / Sato, Kuniaki (1987): Concrete filled steel bearing walls. Vorgetragen bei: IABSE Symposium: Concrete Structures for the Future = Structures en béton de l'avenir = Betonbauwerke für die Zukunft, Paris & Versailles, France, 1987.

    https://doi.org/10.5169/seals-42765

  11. Kato, Ben / Morita, Koji / Furuzawa, Hirao (1986): Acceptable size of weld defect in steel buildings. Vorgetragen bei: IABSE Symposium: Safety and Quality Assurance of Civil Engineering Structures = Sécurité et assurance de la qualité des structures de génie civil = Sicherheit und Qualitätssicherung von Ingenieurbauwerken, Tokio, Japan, 1986.

    https://doi.org/10.5169/seals-39580

  12. Kato, Ben / Nakamichi, Takashi / Saeki, Eiichiro (1986): Stainless steel membrane roof. Vorgetragen bei: IABSE Colloquium: Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau, Stockholm (Sweden), 1986.

    https://doi.org/10.5169/seals-38303

  13. Saeki, Toshio / Kato, Ben / Sato, Kuniaki (1985): Connections using cast steel T-stubs in composite structures. Vorgetragen bei: IABSE - ECCS Symposium: Steel in Buildings = L'acier dans le bâtiment = Stahl im Hochbau, Luxembourg, Luxembourg, 1985.

    https://doi.org/10.5169/seals-37465

  14. Kato, Ben / Sakamoto, Suguru / Ohtake, Fumio (1985): Composite beams using newly developed H-shaped steel with protrusions. Vorgetragen bei: IABSE - ECCS Symposium: Steel in Buildings = L'acier dans le bâtiment = Stahl im Hochbau, Luxembourg, Luxembourg, 1985.

    https://doi.org/10.5169/seals-37473

  15. Kato, Ben (1985): Seismic design of steel buildings in Japan. Vorgetragen bei: IABSE - ECCS Symposium: Steel in Buildings = L'acier dans le bâtiment = Stahl im Hochbau, Luxembourg, Luxembourg, 1985.

    https://doi.org/10.5169/seals-37479

  16. Kato, Ben (1965): Buckling strength of plates in the plastic range. In: IABSE Publications, v. 25 ( 1965).

    https://doi.org/10.5169/seals-20352

  17. Aoki, Hirofumi / Kato, Ben (1970): Deformation capacity of steel plate elements. In: IABSE Publications, v. 30, n. 1 ( 1970).

    https://doi.org/10.5169/seals-23580

  18. Kato, Ben (1964): Stress analysis and tests on a one-sheet hyperboloidal tower. Vorgetragen bei: Septième Congrès de l'AIPC = Seventh Congress of IABSE = Siebter Kongress der IVBH, Rio de Janeiro, Brazil, 10-16 August 1964.

    https://doi.org/10.5169/seals-7844

  19. Naka, Takeo / Kato, Ben / Nakao, Masami (1968): Column-free box-type framing with and without core. Vorgetragen bei: Huitième Congrès de l'AIPC = Eighth Congress of IABSE = Achter Kongress der IVBH, New York, NY, USA, 9-14 September 1968.

    https://doi.org/10.5169/seals-8802

  20. Akiyama, Hiroshi / Kato, Ben (1968): Inelastic behavior of steel framed structure subjected to the seismic force. Vorgetragen bei: Huitième Congrès de l'AIPC = Eighth Congress of IABSE = Achter Kongress der IVBH, New York, NY, USA, 9-14 September 1968.

    https://doi.org/10.5169/seals-8807

  21. Kato, Ben / Mukai, Akiyoshi (1985): Bolted tension flanges joining square hollow section members. In: Journal of Constructional Steel Research, v. 5, n. 3 (Januar 1985).

    https://doi.org/10.1016/0143-974x(85)90001-x

  22. Kuwamura, Hitoshi / Kato, Ben (1989): Effects of randomness in structural members' yield strength on the structural systems' ductility. In: Journal of Constructional Steel Research, v. 13, n. 2-3 (Januar 1989).

    https://doi.org/10.1016/0143-974x(89)90007-2

  23. Kato, Ben (1989): Rotation capacity of H-section members as determined by local buckling. In: Journal of Constructional Steel Research, v. 13, n. 2-3 (Januar 1989).

    https://doi.org/10.1016/0143-974x(89)90008-4

  24. Kato, Ben (1988): Design rules for connections in Japan. In: Journal of Constructional Steel Research, v. 10 (Januar 1988).

    https://doi.org/10.1016/0143-974x(88)90035-1

  25. Kato, Ben (1990): Deformation capacity of steel structures. In: Journal of Constructional Steel Research, v. 17, n. 1-2 (Januar 1990).

    https://doi.org/10.1016/0143-974x(90)90024-b

  26. Kato, Ben (1996): Column curves of steel-concrete composite members. In: Journal of Constructional Steel Research, v. 39, n. 2 (September 1996).

    https://doi.org/10.1016/s0143-974x(96)00030-2

  27. Kato, Ben / Aoki, Hirofumi / Yamanouchi, Hiroyuki (1990): Standardized mathematical expression for stress-strain relations of structural steel under monotonic and uniaxial tension loading. In: Materials and Structures, v. 23, n. 1 (Januar 1990).

    https://doi.org/10.1007/bf02472997

  28. Tagawa, Yasuhisa / Kato, Ben / Aoki, Hirohumi (1989): Behavior of Composite Beams in Steel Frame under Hysteretic Loading. In: Journal of Structural Engineering (ASCE), v. 115, n. 8 (August 1989).

    https://doi.org/10.1061/(asce)0733-9445(1989)115:8(2029)

  29. Fukuta, Toshibumi / Nishiyama, Isao / Yamanouchi, Hiroyuki / Kato, Ben (1989): Seismic Performance of Steel Frames with Inverted V Braces. In: Journal of Structural Engineering (ASCE), v. 115, n. 8 (August 1989).

    https://doi.org/10.1061/(asce)0733-9445(1989)115:8(2016)

  30. Morita, Koji / Kato, Ben (1989): Strength and Deformability of Steel Column Footing. In: Journal of Structural Engineering (ASCE), v. 115, n. 8 (August 1989).

    https://doi.org/10.1061/(asce)0733-9445(1989)115:8(2083)

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine