Arash Karimipour 
- (2022): Effect of lithium-ion batteries on heating a residential building using PCM: Changing the horizontal distance between batteries. In: Journal of Building Engineering, v. 57 (Oktober 2022).
- (2022): Thermal analysis of battery cells placed in triangular enclosures filled with PCM in the presence of forced airflow in an air duct. In: Journal of Building Engineering, v. 57 (Oktober 2022).
- (2022): Reducing electricity demand by integrating a sustainable pack into HVAC- adding PCM in sustainable pack as well as building envelopes. In: Journal of Building Engineering, v. 57 (Oktober 2022).
- (2022): Introducing a new PID controller to control the addition of PCM to the building with ventilation heat recovery installation to reduce the energy demand of the cooling system. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Low cost and eco-friendly building materials derived from wastes: Combined effects of bottom ash and water treatment sludge. In: Construction and Building Materials, v. 324 (März 2022).
- (2022): Influence of micro polypropylene fibres on the fracture energy and mechanical characteristics of recycled coarse brick aggregate concrete. In: Construction and Building Materials, v. 314 (Januar 2022).
- (2021): Influence of bond-slip on the flexural performance and ductility of steel fibres-reinforced RC beams with lap-spliced bars: Experimental and finite element analysis. In: Engineering Structures, v. 249 (Dezember 2021).
- (2021): New Model for the Lap-Splice Length of Tensile Reinforcement in Concrete Elements. In: Journal of Structural Engineering (ASCE), v. 147, n. 12 (Dezember 2021).
- (2021): Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): Effect of EBR- and EBROG-GFRP laminate on the structural performance of corroded reinforced concrete columns subjected to a hysteresis load. In: Structures, v. 34 (Dezember 2021).
- (2021): Effect of micro polypropylene fibres and nano TiO2 on the fresh- and hardened-state properties of geopolymer concrete. In: Construction and Building Materials, v. 300 (September 2021).
- (2021): Predicting the load-carrying capacity of GFRP-reinforced concrete columns using ANN and evolutionary strategy. In: Composite Structures, v. 275 (November 2021).
- (2021): Flexural strength enhancement of recycled aggregate concrete beams with steel fibre-reinforced concrete jacket. In: Engineering Structures, v. 240 (August 2021).
- (2021): Increase the effectiveness of AMTMDs and PMTMDs on the seismic behaviour of structures case study: Ten-stories short period concrete building. In: Engineering Structures, v. 237 (Juni 2021).
- (2021): Propose new implement models to determine the compressive, tensile and flexural strengths of recycled coarse aggregate concrete via imperialist competitive algorithm. In: Journal of Building Engineering, v. 40 (August 2021).
- (2021): Effect of different fibre types on the structural performance of recycled aggregate concrete beams with spliced bars. In: Journal of Building Engineering, v. 38 (Juni 2021).
- (2021): Influence of polypropylene fibres on the thermal and acoustic behaviour of untreated coal coarse aggregates concrete. In: Journal of Building Engineering, v. 36 (April 2021).
- (2021): Influence of steel fibres on the mechanical and physical performance of self-compacting concrete manufactured with waste materials and fillers. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2021): Retrofitting of the corroded reinforced concrete columns with CFRP and GFRP fabrics under different corrosion levels. In: Engineering Structures, v. 228 (Februar 2021).
- (2021): Comparison of the effect of the steel and polypropylene fibres on the flexural behaviour of recycled aggregate concrete beams. In: Structures, v. 29 (Februar 2021).
- (2022): A precise splice length model for reinforced concrete structures. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 175, n. 5 (Mai 2022).
- (2022): Study on the seismic behavior of steel shear plates. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 175, n. 10 (Oktober 2022).
- (2021): Crack Spacing Prediction of Fibre-Reinforced Concrete Beams with Lap-Spliced Bars by Machine Learning Models. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 45, n. 2 (April 2021).
- (2020): Shear and flexural performance of low, normal and high-strength concrete beams reinforced with longitudinal SMA, GFRP and steel rebars. In: Engineering Structures, v. 221 (Oktober 2020).
- (2020): Mechanical and durability properties of steel fibre-reinforced rubberised concrete. In: Construction and Building Materials, v. 257 (Oktober 2020).
- (2020): The effect of polypropylene fibres on the compressive strength, impact and heat resistance of self-compacting concrete. In: Structures, v. 25 (Juni 2020).
- (2021): Improved bending behaviour of steel fibres recycled aggregate concrete beams with a concrete jacket. In: Magazine of Concrete Research, v. 73, n. 12 (Juni 2021).
- (2019): Influence of steel fibres on the flexural performance of reinforced concrete beams with lap-spliced bars. In: Construction and Building Materials, v. 229 (Dezember 2019).
- (2019): Shear behaviour of concrete beams with recycled aggregate and steel fibres. In: Construction and Building Materials, v. 204 (April 2019).
- (2018): Experimental study on the flexural behaviour and ductility ratio of steel fibres coarse recycled aggregate concrete beams. In: Construction and Building Materials, v. 186 (Oktober 2018).
Structurae kooperiert mit
