Mohd Zamin Jumaat
- (2015): Graphene nanoplatelet-fly ash based geopolymer composites. In: Cement and Concrete Research, v. 76 (Oktober 2015).
- (2021): Performance Evaluation of Engineering Properties, Radiation Shielding, and Sustainability of Hollow Masonry Blocks Produced Using a High Volume of Industrial By-Products. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (März 2021).
- (2018): Heat-treated palm oil fuel ash as an effective supplementary cementitious material originating from agriculture waste. In: Construction and Building Materials, v. 167 (April 2018).
- (2018): Properties of eco-friendly self-compacting concrete containing modified treated palm oil fuel ash. In: Construction and Building Materials, v. 158 (Januar 2018).
- (2016): Pitch spacing effect on the axial compressive behaviour of spirally reinforced concrete-filled steel tube (SRCFT). In: Thin-Walled Structures, v. 100 (März 2016).
- (2017): Palm oil industry's bi-products as coarse aggregate in structural lightweight concrete. In: Computers and Concrete, v. 19, n. 5 (Mai 2017).
- (2015): Incorporation preference for rubber-steel bearing isolation in retrofitting existing multi storied building. In: Computers and Concrete, v. 16, n. 4 (Oktober 2015).
- (2014): Incorporation of Rubber-steel Bearing Isolation in Multi-storey Muilding. In: Journal of Civil Engineering and Management, v. 19 (Januar 2014).
- (2019): Microstructural and Strength Characteristics of High-Strength Mortar Using Nontraditional Supplementary Cementitious Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 4 (April 2019).
- (2011): Oil palm shell as a lightweight aggregate for production high strength lightweight concrete. In: Construction and Building Materials, v. 25, n. 4 (April 2011).
- (2012): Lightweight concrete made from crushed oil palm shell: Tensile strength and effect of initial curing on compressive strength. In: Construction and Building Materials, v. 27 (Februar 2012).
- (2013): Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. In: Construction and Building Materials, v. 40 (März 2013).
- (2014): Impact resistance of hybrid fibre-reinforced oil palm shell concrete. In: Construction and Building Materials, v. 50 (Januar 2014).
- (2015): Innovative hybrid bonding method for strengthening reinforced concrete beam in flexure. In: Construction and Building Materials, v. 79 (März 2015).
- (2015): Influence of lightweight aggregate on the bond properties of concrete with various strength grades. In: Construction and Building Materials, v. 84 (Juni 2015).
- (2016): Prediction of the structural behaviour of oil palm shell lightweight concrete beams. In: Construction and Building Materials, v. 102 (Januar 2016).
- (2016): Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete. In: Construction and Building Materials, v. 120 (September 2016).
- (2016): High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber. In: Construction and Building Materials, v. 112 (Juni 2016).
- (2016): Fracture evaluation of multi-layered precast reinforced geopolymer-concrete composite beams by incorporating acoustic emission into mechanical analysis. In: Construction and Building Materials, v. 127 (November 2016).
- (2016): Prestressing of NSM steel strands to enhance the structural performance of prestressed concrete beams. In: Construction and Building Materials, v. 129 (Dezember 2016).
- (2017): Influence of source materials and the role of oxide composition on the performance of ternary blended sustainable geopolymer mortar. In: Construction and Building Materials, v. 144 (Juli 2017).
- (2017): Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review. In: Construction and Building Materials, v. 148 (September 2017).
- (2017): Influence of steel fibers on the mechanical properties and impact resistance of lightweight geopolymer concrete. In: Construction and Building Materials, v. 152 (Oktober 2017).
- (2017): Mechanical, toughness, bond and durability-related properties of lightweight concrete reinforced with steel fibres. In: Materials and Structures, v. 50, n. 1 (Februar 2017).
- (2013): Nonlinear dynamically automated excursions for rubber-steel bearing isolation in multi-storey construction. In: Automation in Construction, v. 30 (März 2013).
- (2012): Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading. In: Automation in Construction, v. 22 (März 2012).
- (2012): Flowing ability of self-consolidating concrete and its binder paste phase including palm oil fuel ash. In: Magazine of Concrete Research, v. 64, n. 10 (Oktober 2012).
- (2017): Manufacturing of high-strength lightweight aggregate concrete using blended coarse lightweight aggregates. In: Journal of Building Engineering, v. 13 (September 2017).
- (2018): Microstructural investigation and durability performance of high volume industrial by-products-based masonry mortars. In: Construction and Building Materials, v. 189 (November 2018).
- (2000): Flexural behaviour of reinforced concrete slabs with ferrocement tension zone cover. In: Construction and Building Materials, v. 14, n. 5 (Juli 2000).
Structurae kooperiert mit
