Nanguo Jin
- (2023): Dynamic self-balanced electrochemical model for non-uniform corrosion of steel reinforcement in concrete under combined effects of heat-moisture-chlorine-oxygen. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2023): Corrosion damages of reinforced concrete characterized by X-ray CT and DVC techniques. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2024): Dynamic Electrochemical Model of Steel Corrosion in Concrete Microenvironment under Multifield Action of Heat-Moisture-Chlorine. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (Januar 2024).
- (2023): Investigations on atmospheric carbonation corrosion of concrete structure beam exposed to real marine-environment for 7 years. In: Journal of Building Engineering, v. 71 (Juli 2023).
- (2023): Corrosion of steel rebar in concrete induced by chloride ions under natural environments. In: Construction and Building Materials, v. 369 (März 2023).
- (2021): Numerical simulation of a magnetic corrosion detector for corrosion detection of steel rebar in concrete. In: Journal of Civil Structural Health Monitoring, v. 12, n. 1 (November 2021).
- (2021): Numerical simulation of electrochemical mechanism of steel rebar corrosion in concrete under natural climate with time-varying temperature and humidity. In: Construction and Building Materials, v. 306 (November 2021).
- (2020): Carbonation process simulation for cement-based materials based on microstructure by a cement hydration model. In: Construction and Building Materials, v. 259 (Oktober 2020).
- (2020): Effect of aggregates spatial distribution on three-dimensional transport of chloride ions in reinforced concrete. In: Construction and Building Materials, v. 259 (Oktober 2020).
- (2017): An Experimental Study on Relationship among Water Sorptivity, Pore Characteristics, and Salt Concentration in Concrete. In: Periodica Polytechnica Civil Engineering, v. 61, n. 3 ( 2017).
- (2020): A comparison study on the natural and half-soaking galvanic accelerated corrosion of reinforced concrete based on an improved electrochemical model. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Corrosion-induced shear performance degradation of reinforced concrete beams. In: Construction and Building Materials, v. 248 (Juli 2020).
- (2020): Chloride Penetration in Reinforced Concrete Beams under Combined Sustained Loading and Drying–Wetting Cycles. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 4 (April 2020).
- (2018): A multiphase numerical simulation of chloride ions diffusion in concrete using electron microprobe analysis for characterizing properties of ITZ. In: Construction and Building Materials, v. 178 (Juli 2018).
- (2018): Performance of reinforced concrete beams corroded under sustained service loads: A comparative study of two accelerated corrosion techniques. In: Construction and Building Materials, v. 162 (Februar 2018).
- (2018): Coupling effect of temperature and relative humidity diffusion in concrete under ambient conditions. In: Construction and Building Materials, v. 159 (Januar 2018).
- (2016): Prediction of chloride binding isotherms for blended cements. In: Computers and Concrete, v. 17, n. 5 (Mai 2016).
- (2015): Influence of flexural loading on chloride ingress in concrete subjected to cyclic drying-wetting condition. In: Computers and Concrete, v. 15, n. 2 (Februar 2015).
- (2007): Numerical simulation of fracture and damage behaviour of concrete at different ages. In: Computers and Concrete, v. 4, n. 3 (Juni 2007).
- (2016): Chloride penetration in concrete under marine atmospheric environment – analysis of the influencing factors. In: Structure and Infrastructure Engineering, v. 12, n. 11 (November 2016).
- (2019): An investigation on the three-dimensional transport of chloride ions in concrete based on X-ray computed tomography technology. In: Construction and Building Materials, v. 221 (Oktober 2019).
- (2012): Model of chloride penetration into cracked concrete subject to drying–wetting cycles. In: Construction and Building Materials, v. 36 (November 2012).
- (2013): Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions. In: Construction and Building Materials, v. 47 (Oktober 2013).
- (2016): A coupled hygro-thermal model of early-age concrete based on micro-pore structure evolution. In: Construction and Building Materials, v. 111 (Mai 2016).
- (2016): Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation. In: Construction and Building Materials, v. 112 (Juni 2016).
- (2016): Chloride penetration into concrete damaged by uniaxial tensile fatigue loading. In: Construction and Building Materials, v. 125 (Oktober 2016).
- (2016): Chloride ingress profiles and binding capacity of mortar in cyclic drying-wetting salt fog environments. In: Construction and Building Materials, v. 127 (November 2016).
- (2017): Modeling moisture transport at the surface layer of fatigue-damaged concrete. In: Construction and Building Materials, v. 151 (Oktober 2017).
- (2014): A nano-model for micromechanics-based elasticity prediction of hardened cement paste. In: Magazine of Concrete Research, v. 66, n. 22 (November 2014).
- (2018): Non-uniform corrosion of steel in mortar induced by impressed current method: An experimental and numerical investigation. In: Construction and Building Materials, v. 183 (September 2018).
Structurae kooperiert mit
