Hesong Jin
- : Crack semantic segmentation performance of various attention modules in different scenarios. In: Structural Concrete.
- (2024): A comprehensive assessment of green concrete incorporated with municipal solid waste incineration bottom: Experiments and life cycle assessment (LCA). In: Construction and Building Materials, v. 413 (Januar 2024).
- (2024): Early hydration and mechanical performance of composited cementitious system prepared from high temperature calcined molybdenum tailings. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Influence of municipal solid waste incineration bottom ash particle size on the evolution mechanism and distribution characteristics of multiscale pore structures in cement paste. In: Construction and Building Materials, v. 452 (November 2024).
- (2024): High-volume recycled glass cementitious and geopolymer composites incorporating graphene oxide. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Microstructure, strength development mechanism and CO2 emission assessments of molybdenum tailings collaborative fly ash geopolymers. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Converting municipal solid waste incineration bottom ash into the value-added artificial lightweight aggregates through cold-bonded granulation technology. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Comprehensive research of the durability, bending deterioration and micro properties of lining concrete in an environment with bending stress–chloride salt–large temperature difference coupling. In: Construction and Building Materials, v. 439 (August 2024).
- (2024): Influence of municipal solid waste incineration bottom ash particle size on cement hydration and performance. In: Construction and Building Materials, v. 432 (Juni 2024).
- (2023): Investigation on deterioration mechanism of geopolymer cemented coal Gangue-Fly ash backfill under combined action of high temperature and salt corrosion environment. In: Construction and Building Materials, v. 398 (September 2023).
- (2023): New applications of municipal solid waste incineration bottom ash (MSWIBA) and calcined clay in construction: Preparation and use of an eco-friendly artificial aggregate. In: Construction and Building Materials, v. 387 (Juli 2023).
- (2023): Experimental study on chloride ion diffusion behavior and microstructure in concrete under alternating ambient humidity conditions. In: Construction and Building Materials, v. 401 (Oktober 2023).
- (2024): Investigation of diffusion behavior, stability of testing ions, interconversion feasibility and microstructures of iodide and chloride in concrete. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Investigating the effects of seawater and sea sand aggregates and supplementary cementitious materials on the early shrinkage and crack resistance of concrete. In: Construction and Building Materials, v. 392 (August 2023).
- (2022): Effects of different supplementary cementitious materials on the performance and environment of eco-friendly mortar prepared from waste incineration bottom ash. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): An experimental study on the influence of continuous ambient humidity conditions on relative humidity changes, chloride diffusion and microstructure in concrete. In: Journal of Building Engineering, v. 59 (November 2022).
- (2022): Mechanics, hydration phase and pore development of embodied energy and carbon composites based on ultrahigh-volume low-carbon cement with limestone calcined clay. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Investigation on mechanical properties improvement of seawater engineered cementitious composites (ECC) using FA/LC2. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete. In: Construction and Building Materials, v. 321 (Februar 2022).
- (2021): Influence of deicing salt on the surface properties of concrete specimens after 20 years. In: Construction and Building Materials, v. 295 (August 2021).
- (2021): Influence of the rainfall intensity on the chloride ion distribution in concrete with different levels of initial water saturation. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Electrically driven ionic transport in the RCM and RIM: Investigations based on experiments and numerical simulations. In: Construction and Building Materials, v. 331 (Mai 2022).
- (2022): Alkali-activated binders based on incinerator bottom ash combined with limestone-calcined clay or fly ash. In: Construction and Building Materials, v. 320 (Februar 2022).
- (2022): Experimental analysis on water penetration resistance and micro properties of concrete: Effect of supplementary cementitious materials, seawater, sea-sand and water-binder ratio. In: Journal of Building Engineering, v. 50 (Juni 2022).
- (2021): Experimental study on durability of fiber reinforced concrete: Effect of cellulose fiber, polyvinyl alcohol fiber and polyolefin fiber. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): Investigation on mechanical and micro properties of concrete incorporating seawater and sea sand in carbonized environment. In: Construction and Building Materials, v. 307 (November 2021).
- (2020): Grey target decision analysis of optimum mixing ratio of LWAS based on the comprehensive performance. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Experimental study on mechanical properties of fiber reinforced concrete: Effect of cellulose fiber, polyvinyl alcohol fiber and polyolefin fiber. In: Construction and Building Materials, v. 261 (November 2020).
- (2017): Influence of temperature and roughness of surrounding rocks on mechanical behavior of rock bolts. In: Soil Dynamics and Earthquake Engineering, v. 103 (Dezember 2017).
- (2019): Axial behavior of reinforced PP-ECC column and hybrid NSC-ECC column under compression. In: Engineering Structures, v. 195 (September 2019).
Structurae kooperiert mit
