Jiwang Jiang 
- (2025): Maintenance mechanisms of rejuvenator-optimized asphalt emulsion in damaged porous asphalt mixture: Morphological, physicochemical, and rheological characterizations. In: Construction and Building Materials, v. 464 (Februar 2025).
- (2024): Mix-mode fracture behavior in asphalt concrete: Asymmetric semi-circular bending testing and random aggregate generation-based modelling. In: Construction and Building Materials, v. 438 (August 2024).
- (2025): Investigation of the field aging behavior and gradient characteristics of asphalt pavement of cement bridge deck. In: Construction and Building Materials, v. 458 (Januar 2025).
- (2024): Multi-physical modeling and automatic network-level prediction of the oxidation aging of in-situ asphalt pavements. In: Construction and Building Materials, v. 455 (Dezember 2024).
- (2024): Optimization design of asphalt emulsion with rejuvenator towards a uniform distribution inside the damaged porous asphalt mixture for a better ravelling resistance. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Performance characterization of the field aged asphalt pavement materials at mortar scale: Testing method optimization and rheology analysis. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): In-situ tracking of multiscale fatigue degradation in the wearing course of asphalt pavement. In: Construction and Building Materials, v. 441 (August 2024).
- (2024): Investigating Fatigue Damage Accumulation of Asphalt Binders Considering Amplitude Sequence and Loading Interaction. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 6 (Juni 2024).
- (2023): Micropore structure characterization of the bitumen emulsion-based cold in-place recycling mixture considering water gradient migration condition through multiple XCT scanning. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): Moisture migration characterization of bitumen emulsion-based cold in-place recycling mixture over curing. In: Materials and Structures, v. 56, n. 7 (10 August 2023).
- (2023): Virtual-specimen modeling of aggregate contact effects on asphalt concrete. In: Construction and Building Materials, v. 400 (Oktober 2023).
- (2023): Study on the Adhesion Characteristics of Asphalt-Aggregate Interface in Cold Recycled Asphalt Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 9 (September 2023).
- (2023): Rheological investigation of a super-tough resin-based binder for steel bridge deck paving. In: Construction and Building Materials, v. 384 (Juni 2023).
- (2023): Internal structure changes within porous asphalt mixture with different saturation under vertical repeated load. In: Construction and Building Materials, v. 372 (April 2023).
- (2022): Investigation of the Thermal Degradation of SBS Polymer in Long-Term Aged Asphalt Binder Using Confocal Laser Scanning Microscopy (CLSM). In: Buildings, v. 12, n. 12 (1 Dezember 2022).
- (2022): Kinetics-based fatigue damage investigation of asphalt mixture through residual strain analysis using indirect tensile fatigue test. In: Construction and Building Materials, v. 352 (Oktober 2022).
- (2022): Recovery efficiency of the damaged porous asphalt mixture with emulsion-based surface treatment: Material optimization and performance verification. In: Construction and Building Materials, v. 347 (September 2022).
- (2021): Nondestructive prediction of rutting resistance of in-service middle asphalt layer based on gene expression programing. In: Construction and Building Materials, v. 293 (Juli 2021).
- (2022): Rheology, Chemical Composition, and Microstructure of the Asphalt Binder in Fine Aggregate Matrix after Different Long-Term Laboratory Aging Procedures. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 4 (April 2022).
- (2021): New innovations in pavement materials and engineering: A review on pavement engineering research 2021. In: Journal of Traffic and Transportation Engineering (English Edition), v. 8, n. 6 (Dezember 2021).
- (2022): Internal structure change of porous asphalt concrete under coupled conditions of load, moisture and temperature. In: Construction and Building Materials, v. 314 (Januar 2022).
- (2020): Investigation of the raveling potential of thin friction course (TFC) under freeze–thaw conditions. In: Materials and Structures, v. 54, n. 1 (16 Dezember 2020).
- (2021): Feasibility and performance of the Semi-circular Bending test in evaluating the low-temperature performance of asphalt mortar. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2021): Meso-structure image pre-selection method for two-dimensional finite element modeling in beam bending simulation of asphalt mixture. In: Construction and Building Materials, v. 268 (Januar 2021).
- (2020): High-temperature failure of porous asphalt mixture under wheel loading based on 2D air void structure analysis. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Laboratory evaluation of rutting resistance for asphalt binders and mixtures modified with different thermochromic microcapsule powders. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Performance Evaluation of Long-Span Suspension Bridge Pavement Based on Long-Term Maintenance Data. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 2 (Februar 2020).
- (2018): Research on the fatigue equation of asphalt mixtures based on actual stress ratio using semi-circular bending test. In: Construction and Building Materials, v. 158 (Januar 2018).
- (2019): Fractal evaluation of the rutting development for multilayer pavement by wheel tracking test. In: Construction and Building Materials, v. 222 (Oktober 2019).
- (2019): Investigation of the internal structure change of two-layer asphalt mixtures during the wheel tracking test based on 2D image analysis. In: Construction and Building Materials, v. 209 (Juni 2019).
Structurae kooperiert mit
