Shouwei Jian 
- (2024): Effects of AFt and steel slag on the performance of beta-hemihydrate phosphogypsum-based cementitious materials. In: Construction and Building Materials, v. 434 (Juli 2024).
- (2024): Hydration mechanism of a sodium-doped phosphogypsum-based hemihydrate whisker (omongwaite) in supersulfated cement system. In: Construction and Building Materials, v. 427 (Mai 2024).
- (2024): C-S-H based nucleation seed prepared from waste glass powder and carbide slag and its application in Portland cement. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2023): Enhancement in compressive strength of carbide slag activated ground granulated blast furnace slag by introducing CaCl2 and NaCl. In: Construction and Building Materials, v. 385 (Juli 2023).
- (2023): Impact of calcium sulfoaluminate cement on printability and early strength development of a slag-based 3D printing cementitious material. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Photocurable resin as rapid in-situ protective coating for slag concrete against dry shrinkage. In: Construction and Building Materials, v. 396 (September 2023).
- (2023): Efficient utilization of multi-source solid waste to prepare the novel core-shell structured lightweight aggregates and its immobilization for volatile heavy metals. In: Journal of Building Engineering, v. 71 (Juli 2023).
- (2022): Influence of wet grinded slag on the hydration of phosphogypsum-slag based cement and its application in backfill tailings. In: Construction and Building Materials, v. 360 (Dezember 2022).
- (2022): Preparation of lightweight aggregates using waste soil contaminated with heavy metals: Physical properties, microstructure and verification of heavy metal solidification through different leaching tests. In: Journal of Building Engineering, v. 61 (Dezember 2022).
- (2022): Investigation of sulfate on the migration/solidification mechanism and control of cadmium during sintering in lightweight aggregates. In: Construction and Building Materials, v. 352 (Oktober 2022).
- (2022): Preparation and evaluation of high-fluid backfill materials from construction spoil. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Compressive strength and permeability of steam-cured mortar incorporating high volume fly ash with different activation degrees by wet milling. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Effect of sulfonated acetone formaldehyde on the properties of high-fluid backfill materials. In: Construction and Building Materials, v. 327 (April 2022).
- (2022): Preparation of organic montmorillonite supported TiO2 and its application in methylene blue removal. In: Construction and Building Materials, v. 341 (Juli 2022).
- (2021): Preparation of nano cement particles by wet-grinding and its effect on hydration of cementitious system. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Abrasion Resistance Improvement of Recycled Aggregate Pervious Concrete with Granulated Blast Furnace Slag and Copper Slag. In: Journal of Advanced Concrete Technology, v. 19, n. 11 (20 November 2021).
- (2021): On-demand setting of extrusion-based 3D printing gypsum using a heat-induced accelerator. In: Construction and Building Materials, v. 304 (Oktober 2021).
- (2021): Study on performance and function mechanisms of whisker modified flue gas desulfurization (FGD) gypsum. In: Construction and Building Materials, v. 301 (September 2021).
- (2021): Compressive strength and hydration process of sodium carbonate-activated superfine slag/marble powder binders. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Leaching behavior of copper and chromium in the mortar containing artificial fine aggregate prepared by contaminated soil. In: Construction and Building Materials, v. 270 (Februar 2021).
- (2020): Utilization of municipal sewage sludge and waste glass powder in production of lightweight aggregates. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Potential utilization of copper tailings in the preparation of low heat cement clinker. In: Construction and Building Materials, v. 252 (August 2020).
- (2018): Improvement in fluidity loss of magnesia phosphate cement by incorporating polycarboxylate superplasticizer. In: Construction and Building Materials, v. 165 (März 2018).
- (2018): Effect of hydroxypropyl-methyl cellulose ether on rheology of cement paste plasticized by polycarboxylate superplasticizer. In: Construction and Building Materials, v. 160 (Januar 2018).
- (2016): Effect of sodium tripolyphosphate on adsorbing behavior of polycarboxylate superplasticizer. In: Construction and Building Materials, v. 126 (November 2016).
- (2016): Mechanical and hydration characteristics of autoclaved aerated concrete (AAC) containing iron-tailings: Effect of content and fineness. In: Construction and Building Materials, v. 128 (Dezember 2016).
- (2017): Effect of borax on rheology of calcium sulphoaluminate cement paste in the presence of polycarboxylate superplasticizer. In: Construction and Building Materials, v. 139 (Mai 2017).
- (2018): Effect of Competitive Adsorption between Polycarboxylate Superplasticizer and Hydroxypropylmethyl Cellulose on Rheology of Gypsum Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 7 (Juli 2018).
- (2017): Improvement of Polyethylene Glycol in Compatibility with Polycarboxylate Superplasticizer and Poor-Quality Aggregates Containing Montmorillonite. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 9 (September 2017).
- (2017): Effect of the Adsorbing Behavior of Phosphate Retarders on Hydration of Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 9 (September 2017).
Structurae kooperiert mit
