Lutao Jia
- (2024): Specimen size effect on compressive strength of 3D printed concrete containing coarse aggregate with varying water to binder ratios. In: Journal of Building Engineering, v. 97 (November 2024).
- (2025): Printing large size eggshell-shaped elements with ultra-high-performance concrete: From material design to structural bearing capacity assessment. In: Construction and Building Materials, v. 462 (Februar 2025).
- (2024): Optimization strategy for incorporating recycled brick powder in 3D-printed concrete by balancing low carbon footprint and enhanced performance. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Influence of different supplementary cementitious materials on water distribution and rheological behavior of blended cement paste. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Understanding the deterioration of hydration products in alkali-activated slag/Portland cement exposure to sulfate attack. In: Journal of Building Engineering, v. 95 (Oktober 2024).
- (2024): Effect of recycled brick powder with various particle features on early-age hydration, water state, and rheological properties of blended cement paste in the context of 3D Printing. In: Construction and Building Materials, v. 418 (März 2024).
- (2024): Printability and mechanical properties of 3D printing ultra-high performance concrete incorporating limestone powder. In: Construction and Building Materials, v. 426 (Mai 2024).
- (2024): Early-age inhomogeneous deformation of 3D printed concrete: Characteristics and influences of superplasticizer and water-binder ratio. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2022): 3D printing lightweight aggregate concrete prepared with shell-packing-aggregate method - Printability, mechanical properties and pore structure. In: Journal of Building Engineering, v. 62 (Dezember 2022).
- (2022): Bond behavior between steel bars and 3D printed concrete: Effect of concrete rheological property, steel bar diameter and paste coating. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): A two-phase design strategy based on the composite of mortar and coarse aggregate for 3D printable concrete with coarse aggregate. In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): Synergistic effect of polycarboxylate superplasticizer and silica fume on early properties of early high strength grouting material for semi-flexible pavement. In: Construction and Building Materials, v. 319 (Februar 2022).
- (2022): Optimization of 3D printing concrete with coarse aggregate via proper mix design and printing process. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Mechanical anisotropy evolution of 3D-printed alkali-activated materials with different GGBFS/FA combinations. In: Journal of Building Engineering, v. 50 (Juni 2022).
Structurae kooperiert mit
