O. Burkan Isgor 
- (2024): Fundamentally understanding carbonation-induced corrosion of steel in environmentally friendly concretes. In: Revista ALCONPAT, v. 14, n. 3 (1 September 2024).
- (2022): Heat of Hydration, Shrinkage, and Flexural Strength of Portland Limestone Cement Mortar. In: Advances in Civil Engineering Materials, v. 11, n. 1 (11 Januar 2022).
- (2022): Methods of incorporation of new reaction products in thermodynamic databases of cementitious systems. In: RILEM Technical Letters, v. 7 (August 2022).
- (2022): The Influence of Specimen Preparation on the Results of the Ball-on-Three-Ball (B3B) Test for Cementitious Materials. In: Advances in Civil Engineering Materials, v. 11, n. 1 (11 Januar 2022).
- (2022): Electrical and Transport Properties of Cement Mortar Made Using Portland Limestone Cement. In: Advances in Civil Engineering Materials, v. 11, n. 1 (11 Januar 2022).
- (2022): M&S highlight: Andrade et al. (2004), Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method. In: Materials and Structures, v. 55, n. 2 (4 Februar 2022).
- (2022): M&S highlight: Mangat and Molloy (1994), Prediction of long term chloride concentration in concrete. In: Materials and Structures, v. 55, n. 2 (4 Februar 2022).
- (2021): Passivation and Chloride-Induced Depassivation of Additively Manufactured Duplex Stainless Steel Clads in Simulated Concrete Pore Solution. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 8 (August 2021).
- (2009): Durability of recycled aggregate concrete designed with equivalent mortar volume method. In: Cement and Concrete Composites, v. 31, n. 8 (September 2009).
- (2011): Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate. In: Cement and Concrete Composites, v. 33, n. 10 (November 2011).
- (2011): Shear capacity evaluation of steel reinforced recycled concrete (RRC) beams. In: Engineering Structures, v. 33, n. 3 (März 2011).
- (2021): Comparison of thresholding techniques for quantifying portland cement hydrates using synchrotron microtomography. In: Construction and Building Materials, v. 266 (Januar 2021).
- (2020): Evaluating the efficacy of antimicrobial additives against biogenic acidification in simulated wastewater exposure solutions. In: RILEM Technical Letters, v. 4 (Februar 2020).
- (2018): Prediction of Chloride Ingress in Saturated Concrete Using Formation Factor and Chloride Binding Isotherm. In: Advances in Civil Engineering Materials, v. 7, n. 1 (Dezember 2018).
- (2016): Effectiveness of E. Coli Biofilm on Mortar to Inhibit Biodegradation by Biogenic Acidification. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 4 (April 2016).
- (2015): Numerical Study on the Effect of Cracking on Surface Resistivity of Plain and Reinforced Concrete Elements. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 12 (Dezember 2015).
- (2019): Relating the Formation Factor and Chloride Binding Parameters to the Apparent Chloride Diffusion Coefficient of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 2 (Februar 2019).
- (2009): Quantitative Interpretation of Half-Cell Potential Measurements in Concrete Structures. In: Journal of Materials in Civil Engineering (ASCE), v. 21, n. 9 (September 2009).
- (2018): A nearly self-sufficient framework for modelling reactive-transport processes in concrete. In: Materials and Structures, v. 52, n. 1 (Dezember 2018).
- (2016): Cracking susceptibility of concrete made with coarse recycled concrete aggregates. In: Construction and Building Materials, v. 102 (Januar 2016).
- (2017): Quantification of synthesized hydration products using synchrotron microtomography and spectral analysis. In: Construction and Building Materials, v. 157 (Dezember 2017).
- (2008): Experimental verification and application of a practical corrosion model for uniformly depassivated steel in concrete. In: Materials and Structures, v. 41, n. 7 (August 2008).
- (2016): Numerical investigation of the role of embedded reinforcement mesh on electrical resistivity measurements of concrete using the Wenner probe technique. In: Materials and Structures, v. 49, n. 1-2 (Januar 2016).
- (2006): Modelling steel corrosion in concrete structures. In: Materials and Structures, v. 39, n. 3 (April 2006).
- (2010): Shear strength of reinforced recycled concrete beams with stirrups. In: Magazine of Concrete Research, v. 62, n. 10 (Oktober 2010).
- (2012): Bond performance of deformed steel bars in concrete produced with coarse recycled concrete aggregate. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 39, n. 2 (Februar 2012).
- (2006): Advanced modelling of concrete deterioration due to reinforcement corrosion. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 33, n. 6 (Juni 2006).
- (2018): Development of empirical models for chloride binding in cementitious systems containing admixed chlorides. In: Construction and Building Materials, v. 189 (November 2018).
- (2018): Role of Supplementary Cementitious Material Type in the Mitigation of Calcium Oxychloride Formation in Cementitious Pastes. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 10 (Oktober 2018).
- (2017): Mitigation of Calcium Oxychloride Formation in Cement Pastes Using Undensified Silica Fume. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 10 (Oktober 2017).
Structurae kooperiert mit
