Raja Rizwan Hussain 
- (2022): Effect of curing compounds on the quality of passive layer development under varying oxygen concentration for RC structures in the course of early curing of concrete. In: Construction and Building Materials, v. 350 (Oktober 2022).
- (2021): Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment. In: Construction and Building Materials, v. 274 (März 2021).
- (2020): Electro-chemical investigation for the effect of rebar source and surface condition on the corrosion rate of reinforced concrete structures under varying corrosive environments. In: Construction and Building Materials, v. 244 (Mai 2020).
- (2016): Influence of Stirrup Corrosion on Shear Strength of Reinforced Concrete Slender Beams. In: ACI Structural Journal, v. 113, n. 6 (November 2016).
- (2018): Coupled effect of coarse aggregate and micro-silica on the relation between strength and elasticity of high performance concrete. In: Construction and Building Materials, v. 175 (Juni 2018).
- (2015): Incorporation preference for rubber-steel bearing isolation in retrofitting existing multi storied building. In: Computers and Concrete, v. 16, n. 4 (Oktober 2015).
- (2014): Computer based estimation of backbone curves for hysteretic Response of reinforced concrete columns under static cyclic lateral loads. In: Computers and Concrete, v. 14, n. 2 (August 2014).
- (2014): Implication of rubber-steel bearing nonlinear models on soft storey structures. In: Computers and Concrete, v. 13, n. 5 (Mai 2014).
- (2013): Computer based FEM stabilization of oxygen transport model for material and energy simulation in corroding reinforced concrete. In: Computers and Concrete, v. 12, n. 5 (November 2013).
- (2011): Enhanced mass balance Tafel slope model for computer based FEM computation of corrosion rate of steel reinforced concrete coupled with CO2transport. In: Computers and Concrete, v. 8, n. 2 (April 2011).
- (2019): Effects of Temperature and Stress on Creep Behavior of PP and Hybrid Fiber Reinforced Reactive Powder Concrete. In: International Journal of Concrete Structures and Materials, v. 13, n. 1 (Januar 2019).
- (2014): Efficient Design in Building Construction With Rubber Bearing in Medium Risk Seismicity: Case Study and Assessment. In: Journal of Civil Engineering and Management, v. 20, n. 5 (Oktober 2014).
- (2014): Parallel Framework for Earthquake Induced Response Computation of the Sdof Structure. In: Journal of Civil Engineering and Management, v. 20, n. 4 (Juli 2014).
- (2019): Global sensitivity analysis of certain and uncertain factors for a circular tunnel under seismic action. In: Frontiers of Structural and Civil Engineering, v. 13, n. 6 (Oktober 2019).
- (2013): Optimum structural modelling for tall buildings. In: The Structural Design of Tall and Special Buildings, v. 22, n. 15 (25 Oktober 2013).
- (2019): Creep behavior of steel fiber reinforced reactive powder concrete at high temperature. In: Construction and Building Materials, v. 205 (April 2019).
- (2016): Coupled Effect of Coarse Aggregate Type and Silica Fume on Creep Coefficients of High-Strength Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 12 (Dezember 2016).
- (2012): Multivariable Empirical Analysis of Coupled Oxygen and Moisture for Potential and Rate of Quantitative Corrosion in Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 7 (Juli 2012).
- (2010): Development of numerical model for FEM computation of oxygen transport through porous media coupled with micro-cell corrosion model of steel in concrete structures. In: Computers & Structures, v. 88, n. 9-10 (Mai 2010).
- (2010): Influence of connectivity of concrete pores and associated diffusion of oxygen on corrosion of steel under high humidity. In: Construction and Building Materials, v. 24, n. 6 (Juni 2010).
- (2011): Enhanced electro-chemical corrosion model for reinforced concrete under severe coupled action of chloride and temperature. In: Construction and Building Materials, v. 25, n. 3 (März 2011).
- (2012): Coupled effect of ambient high relative humidity and varying temperature marine environment on corrosion of reinforced concrete. In: Construction and Building Materials, v. 28 (März 2012).
- (2012): Investigation of severe corrosion observed at intersection points of steel rebar mesh in reinforced concrete construction. In: Construction and Building Materials, v. 37 (Dezember 2012).
- (2015): Investigation for the impact of nature of coarse aggregate on the passive layer formation and corresponding corrosion of reinforcement bars in high performance concrete. In: Construction and Building Materials, v. 100 (Dezember 2015).
- (2017): High temperature and residual properties of reactive powder concrete – A review. In: Construction and Building Materials, v. 147 (August 2017).
- (2010): Investigation of volumetric effect of coarse aggregate on corroding steel reinforcement at the interfacial transition zone of concrete. In: KSCE Journal of Civil Engineering, v. 15, n. 1 (Dezember 2010).
- (2011): Corrosion in RC construction under chloride and hot weather. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 164, n. 4 (August 2011).
- (2013): Nonlinear dynamically automated excursions for rubber-steel bearing isolation in multi-storey construction. In: Automation in Construction, v. 30 (März 2013).
- (2011): Computer-aided oxygen transport model of mass and energy simulation for corrosion of reinforced steel. In: Automation in Construction, v. 20, n. 5 (August 2011).
- (2012): Non-linear time domain analysis of base isolated multi-storey building under site specific bi-directional seismic loading. In: Automation in Construction, v. 22 (März 2012).
Structurae kooperiert mit
