Jun Hu 
- (2024): A simple method and prediction model for calculating the cooling load of impinging jet ventilation system in office buildings. In: Building and Environment, v. 254 (April 2024).
- (2023): Recycled mineral admixtures based on recycled clay brick. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2023): Longitudinal Mechanical Properties of Shield Tunnels Crossing Soft and Hard Mutation Strata. In: International Journal of Geomechanics, v. 23, n. 12 (Dezember 2023).
- (2023): Rheological and early hydration of cementitious material containing recycled concrete powders collected from recycled aggregates. In: Construction and Building Materials, v. 393 (August 2023).
- (2022): Numerical investigation of the thermal and ventilation performance of a combined impinging jet ventilation and passive chilled beam system. In: Building and Environment, v. 226 (Dezember 2022).
- (2022): Mechanical properties and microscopic characterization of cement stabilized calcareous sand modified by nano SiO2. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Shaking table test on seismic response of a planar irregular structure with differential settlements of foundation. In: Structures, v. 46 (Dezember 2022).
- (2022): Mechanical properties and microscopic characterization of mortar with recycled aggregate from waste road. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2011): Numerical analysis of failure mechanism of tunnel under different confining pressure. In: Procedia Engineering, v. 26 ( 2011).
- (2022): Study of Local Traffic Flow Fluctuation under Rainfall and Waterlogging with Characteristics of Dynamic Spatiotemporal Changes. In: Journal of Transportation Engineering, Part A: Systems, v. 148, n. 7 (Juli 2022).
- (2021): Simplified models for predicting thermal stratification in impinging jet ventilation rooms using multiple regression analysis. In: Building and Environment, v. 206 (Dezember 2021).
- (2018): Statistical Evaluation of the Load-Settlement Response of a Multicolumn Composite Foundation. In: International Journal of Geomechanics, v. 18, n. 4 (April 2018).
- (2021): Numerical study on thermal stratification for impinging jet ventilation system in office buildings. In: Building and Environment, v. 196 (Juni 2021).
- (2020): Unconfined Mechanical Properties of Nanoclay Cement Compound Modified Calcareous Sand of the South China Sea. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2015): Life cycle energy analysis of museum buildings: A case study of museums in Hangzhou. In: Energy and Buildings, v. 109 (Dezember 2015).
- (2020): A New Elastoplastic Time-History Analysis Method for Frame Structures. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2018): Microstructure evolution and mechanical properties of briefly heat-treated SAF 2507 super duplex stainless steel welds. In: Construction and Building Materials, v. 168 (April 2018).
- (2019): Operational modal analysis and Bayesian model updating of a standing seam metal roofing system. In: International Journal of Lifecycle Performance Engineering, v. 3, n. 1 ( 2019).
- (2017): Statistical Analysis of Earthquake-Induced Bending Moment in Fixed-Head Piles Embedded in Soft Clay. In: Journal of Engineering Mechanics (ASCE), v. 143, n. 9 (September 2017).
- (2018): Operational Modal Analysis and Bayesian Model Updating of a Coupled Building. In: International Journal of Structural Stability and Dynamics, v. 19, n. 1 (Dezember 2018).
- (2019): Study of single perfobond rib with head stud shear connectors for a composite structure. In: Magazine of Concrete Research, v. 71, n. 17 (September 2019).
- (2019): Topological design of piezoelectric actuator layer for linear quadratic regulator control of thin-shell structures under transient excitation. In: Smart Materials and Structures, v. 28, n. 9 (September 2019).
- (2019): Site Measurement and Study of Vertical Freezing Wall Temperatures of a Large-Diameter Shield Tunnel. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Markov chain Monte Carlo-based Bayesian model updating of a sailboat-shaped building using a parallel technique. In: Engineering Structures, v. 193 (August 2019).
- (2019): Numerical Analysis for U-Shaped Thin-Walled Structure Reinforced Timber Beam Based on Thin-Layer Beam Theory. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2018): Operational modal identification and finite element model updating of a coupled building following Bayesian approach. In: Structural Control and Health Monitoring, v. 25, n. 2 (Februar 2018).
- (2017): Statistical evaluation of the overall strength of a soil-cement column under axial compression. In: Construction and Building Materials, v. 132 (Februar 2017).
- (2014): A simplified structural mechanics model for cable-truss footbridges and its implications for preliminary design. In: Engineering Structures, v. 68 (Juni 2014).
- (2017): Operational modal identification of a boat-shaped building by a Bayesian approach. In: Engineering Structures, v. 138 (Mai 2017).
- (2018): Use of sandstone powder as a mineral additive for concrete. In: Construction and Building Materials, v. 186 (Oktober 2018).
Structurae kooperiert mit
