Shaodan Hou
- (2024): Mechanical, freeze-thaw resistance and heavy metals leaching properties of alkali-activated recycled concrete powder solidified sludge. In: Construction and Building Materials, v. 447 (Oktober 2024).
- (2024): Rheology of fiber-reinforced mortar for 3D printing construction: Effect of recycled hybrid powder and polyethylene fiber. In: Construction and Building Materials, v. 447 (Oktober 2024).
- (2024): Effect of Recycled Brick Powder on Corrosion of Reinforced Concrete under the Action of Chloride or Carbonation. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (Oktober 2024).
- (2024): Understanding the chloride migration in recycled powder concrete: Effects of recycled powder type, replacement rate and substitution pattern. In: Construction and Building Materials, v. 436 (Juli 2024).
- (2024): Effect of additional water content and adding methods on the performance of recycled aggregate concrete. In: Construction and Building Materials, v. 423 (April 2024).
- (2024): Effects of early-age carbonation curing on the properties of cement-based materials: A review. In: Journal of Building Engineering, v. 84 (Mai 2024).
- (2023): Mechanical properties and pore structure of 3D printed mortar with recycled powder. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Corrosion mechanism of recycled mortar prepared from CO2-treated hardened cement paste powder. In: Construction and Building Materials, v. 384 (Juni 2023).
- (2022): Enhancing the elastic modulus of concrete prepared with recycled coarse aggregates of different quality by chemical modifications. In: Construction and Building Materials, v. 360 (Dezember 2022).
- (2023): Sustainable utilization of hybrid recycled powder and recycled polyethylene terephthalate fiber in mortar: Strength, durability and microstructure. In: Journal of Building Engineering, v. 63 (Januar 2023).
- (2022): Study on preparation and mechanical properties of 3D printed concrete with different aggregate combinations. In: Journal of Building Engineering, v. 51 (Juli 2022).
- (2021): Fresh properties of 3D printed mortar with recycled powder. In: Construction and Building Materials, v. 309 (November 2021).
- (2022): Influence of kenaf stalk on printability and performance of 3D printed industrial tailings based geopolymer. In: Construction and Building Materials, v. 315 (Januar 2022).
- (2021): On rheology of mortar with recycled fine aggregate for 3D printing. In: Construction and Building Materials, v. 311 (Dezember 2021).
- (2022): Effect of recycled powders on the mechanical properties and durability of fully recycled fiber-reinforced mortar. In: Journal of Building Engineering, v. 45 (Januar 2022).
- (2021): Rheological behavior and compressive strength of concrete made with recycled fine aggregate of different size range. In: Construction and Building Materials, v. 268 (Januar 2021).
- (2021): A review of 3D printed concrete: Performance requirements, testing measurements and mix design. In: Construction and Building Materials, v. 273 (März 2021).
- (2021): Effect of moisture condition and brick content in recycled coarse aggregate on rheological properties of fresh concrete. In: Journal of Building Engineering, v. 35 (März 2021).
- (2017): Coupled heat and moisture transfer in hollow concrete block wall filled with compressed straw bricks. In: Energy and Buildings, v. 135 (Januar 2017).
- (2020): Improvement on the properties of waste glass mortar with nanomaterials. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Combined use of recycled powder and recycled coarse aggregate derived from construction and demolition waste in self-compacting concrete. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Rheological properties of mortar containing recycled powders from construction and demolition wastes. In: Construction and Building Materials, v. 237 (März 2020).
Structurae kooperiert mit
