Shuxian Hong 
- (2024): Novel insights on the setting process, hardened properties, and durability of sustainable ultra-high-performance seawater sea sand concrete. In: Construction and Building Materials, v. 447 (Oktober 2024).
- : Experimental investigation on mechanical property and hydration process of sintered sludge cement paste at different water‐binder ratios and curing ages. In: Structural Concrete.
- (2024): Design and characterization of solid waste based self-healing artificial aggregate. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Electrical conductive mortar based on expanded graphite for auxiliary anode. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Beam-hardening correction method for quantifying moisture content in cement paste based on X-ray radiography. In: Construction and Building Materials, v. 421 (März 2024).
- (2024): Influence of slag powder on the mechanical and electrical properties of CECM. In: Construction and Building Materials, v. 421 (März 2024).
- (2024): The influence of carbon dioxide concentration on carbonation behavior in cement paste. In: Journal of Building Engineering, v. 88 (Juli 2024).
- (2023): Investigation of size-independent fracture energy of cementitious materials by quantifying the deformation energy. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2023): Corrosion resistance and mechanical properties of in-situ grown Mg/Al layered double hydroxide coatings on reinforcing steel. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Investigating mechanism for mortar-porous aggregate interfacial bond improvement based on coupled XCT-DVC analysis. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2023): Electrodeposition-hydrothermal synthesis of inhibitor anion-intercalated layered double hydroxide films for corrosion resistance on steel substrates. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2017): Monitoring reinforcement corrosion and corrosion-induced cracking by X-ray microcomputed tomography method. In: Cement and Concrete Research, v. 100 (Oktober 2017).
- (2023): Growth Mechanism and Corrosion Resistance of a Co-Al Layered Double Hydroxide Film Grown In Situ on a Steel Substrate. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 4 (April 2023).
- (2023): Effect of power ultrasound assisted mixing on graphene oxide in cement paste: Dispersion, microstructure and mechanical properties. In: Journal of Building Engineering, v. 69 (Juni 2023).
- (2021): Manufacturing of integral hydrophobic concrete (IHC) using Pickering emulsion with limited effects on mechanical strength. In: Construction and Building Materials, v. 312 (Dezember 2021).
- (2022): Numerical simulation and mechanism analysis of GPR-based reinforcement corrosion detection. In: Construction and Building Materials, v. 317 (Januar 2022).
- (2021): Alkali-activated artificial aggregates fabricated by red mud and fly ash: Performance and microstructure. In: Construction and Building Materials, v. 281 (April 2021).
- (2021): Enhanced corrosion resistance and applicability of Mg/Al-CO32− layered double hydroxide film on Q235 steel substrate. In: Construction and Building Materials, v. 276 (März 2021).
- (2021): Core-Shell structured ceramsite made by excavated soil and expanded perlite through cold-bonded technology. In: Construction and Building Materials, v. 306 (November 2021).
- (2020): Changes in chemical phases and microscopic characteristics of fly ash blended cement pastes in different CO2 concentrations. In: Construction and Building Materials, v. 257 (Oktober 2020).
- (2020): Interior fracture analysis of rubber-cement composites based on X-ray computed tomography and digital volume correlation. In: Construction and Building Materials, v. 259 (Oktober 2020).
- (2021): Compositions and microstructures of hardened cement paste with carbonation curing and further water curing. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2020): Determining influence of impressed current density on current efficiency with X-ray micro-computed tomography. In: Construction and Building Materials, v. 246 (Juni 2020).
- (2018): 3D visualized tracing of rebar corrosion-inhibiting features in concrete with a novel chemical self-healing system. In: Construction and Building Materials, v. 168 (April 2018).
- (2018): Electrochemical feature for chloride ion transportation in fly ash blended cementitious materials. In: Construction and Building Materials, v. 161 (Februar 2018).
- (2019): Investigating the influence of fly ash on the hydration behavior of cement using an electrochemical method. In: Construction and Building Materials, v. 222 (Oktober 2019).
- (2019): Investigation of the Cl− migration behavior of cement materials blended with fly ash or/and slag via the electrochemical impedance spectroscopy method. In: Construction and Building Materials, v. 211 (Juni 2019).
- (2017): Influence of slag incorporation on electrochemical behavior of carbonated cement. In: Construction and Building Materials, v. 147 (August 2017).
- (2017): Non-destructive tracing on hydration feature of slag blended cement with electrochemical method. In: Construction and Building Materials, v. 149 (September 2017).
- (2015): Experimental monitoring of chloride-induced reinforcement corrosion and chloride contamination in concrete with ground-penetrating radar. In: Structure and Infrastructure Engineering, v. 11, n. 1 (Oktober 2015).
Structurae kooperiert mit
