0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Elie G. Hantouche

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Hantouche, Elie G. / Al Khatib, Karim K. / Jabotian, Hagop V. (2020): Design of Simple Steel Connections under Fire Temperatures. In: Engineering Journal, v. 57, n. 3 (September 2020).

    https://doi.org/10.62913/engj.v57i3.1168

  2. El Kalash, Sana N. / Hantouche, Elie G. (2023): Methodology and Application of Ductile Damage Modeling on Double Tee and Extended Endplate Connections. In: Practice Periodical on Structural Design and Construction, v. 28, n. 2 (Mai 2023).

    https://doi.org/10.1061/ppscfx.sceng-1184

  3. Hantouche, Elie G. / Harajli, Mohamed H.: Seismic FRP Bond Strengthening of the Critical Splice Region in Wide Reinforced Concrete Columns. Vorgetragen bei: Structures Congress 2013, Pittsburgh, Pennsylvania, May 2-4, 2013.

    https://doi.org/10.1061/9780784412848.181

  4. El Ghor, Ahmad H. / Morovat, Mohammed Ali / Engelhardt, Michael D. / Hantouche, Elie G. (2022): Creep Behavior of Transverse Welded Lap Joints at Elevated Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 6 (Juni 2022).

    https://doi.org/10.1061/(asce)mt.1943-5533.0004239

  5. Hantouche, Elie G. / Jabotian, Hagop V. / Al Khatib, Karim K. / El Ghor, Ahmad H. / Morovat, Mohammed A. (2018): A Unified Mechanical Model for Fire Design of Simple Steel Connections. Vorgetragen bei: Structures Congress 2018, Fort Worth, Texas, 19-21 April 2018.

    https://doi.org/10.1061/9780784481325.016

  6. El Ghor, Ahmad H. / Hantouche, Elie G. / Morovat, Mohammed A. / Engelhardt, Michael D. (2021): Rate-Dependent Behavior of Transverse Welded Lap Joints at Elevated Temperatures. In: Journal of Structural Engineering (ASCE), v. 147, n. 2 (Februar 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002898

  7. Chahrour, Rayan A. / El Ghor, Ahmad H. / Hantouche, Elie G. (2020): Influence of Loading Rates on Single Shear-Bolted Lap Joints at Elevated Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 11 (November 2020).

    https://doi.org/10.1061/(asce)mt.1943-5533.0003435

  8. Al Haddad, Hadi O. / Hantouche, Elie G. (2020): Transient creep analytical modeling for shear endplate assemblies in fire. In: Journal of Structural Fire Engineering, v. 11, n. 3 (Mai 2020).

    https://doi.org/10.1108/jsfe-08-2019-0029

  9. Hajjar, Mohammad A. / Hantouche, Elie G. (2020): Predicting the Demand of Shear Tab Connections with Composite Beams in Fire. In: International Journal of Steel Structures, v. 20, n. 3 ( 2020).

    https://doi.org/10.1007/s13296-020-00325-5

  10. Hantouche, Elie G. / Mouannes, Elie N. (2016): Strength and stiffness modeling of extended endplate connections with circular and rectangular bolt configurations. In: Steel and Composite Structures, v. 22, n. 2 ( 2016).

    https://doi.org/10.12989/scs.2016.22.2.323

  11. Helwe, Mazen B. / Hantouche, Elie G. (2019): Methodology for Predicting the Alternate Block Shear Failure of Beams in Bolted Flange Plate and Double Tee Moment Connections. In: International Journal of Steel Structures, v. 19, n. 4 ( 2019).

    https://doi.org/10.1007/s13296-019-00212-8

  12. Jabotian, Hagop V. / Hantouche, Elie G. (2019): Thermal creep behavior of shear tabs in fire using modified burgers model. In: Journal of Constructional Steel Research, v. 160 (September 2019).

    https://doi.org/10.1016/j.jcsr.2019.05.050

  13. El Kalash, Sana N. / Hantouche, Elie G. (2019): Prying effect in unstiffened extended endplate connection with circular bolts configuration. In: Journal of Constructional Steel Research, v. 160 (September 2019).

    https://doi.org/10.1016/j.jcsr.2019.05.043

  14. Hantouche, Elie G. / Kukreti, Anant R. / Rassati, Gian A. / Swanson, James A. (2013): Modified stiffness model for thick flange in built-up T-stub connections. In: Journal of Constructional Steel Research, v. 81 (Februar 2013).

    https://doi.org/10.1016/j.jcsr.2012.11.009

  15. Hantouche, Elie G. / Abboud, Nabil H. (2014): Stiffness modeling of bolted thick built-up T-stub connections including secondary prying effect. In: Journal of Constructional Steel Research, v. 95 (April 2014).

    https://doi.org/10.1016/j.jcsr.2013.12.012

  16. Hantouche, Elie G. / Sleiman, Sarah A. (2017): Axial restraint forces in shear endplates of steel frames due to fire. In: Journal of Constructional Steel Research, v. 128 (Januar 2017).

    https://doi.org/10.1016/j.jcsr.2016.09.021

  17. El Ghor, Ahmad H. / Hantouche, Elie G. (2017): Thermal creep mechanical-based modeling for flush endplate connections in fire. In: Journal of Constructional Steel Research, v. 136 (September 2017).

    https://doi.org/10.1016/j.jcsr.2017.04.022

  18. El Kalash, Sana N. / Hantouche, Elie G. (2018): Secondary prying of column flange in Tee-connections: Experimental investigation and mechanical modeling. In: Journal of Constructional Steel Research, v. 145 (Juni 2018).

    https://doi.org/10.1016/j.jcsr.2018.03.012

  19. Helwe, Mazen B. / El Kalash, Sana N. / Hantouche, Elie G. (2019): Alternate block shear in beams: Experimental and FE fracture modeling. In: Engineering Structures, v. 186 (Mai 2019).

    https://doi.org/10.1016/j.engstruct.2019.02.014

  20. Hany, Najwa F. / Hantouche, Elie G. / Harajli, Mohamed H. (2017): Generalized Axial Stress-Strain Response of Rectangular Columns Confined Using CFRP Jackets and Anchors. In: Journal of Composites for Construction, v. 21, n. 1 (Februar 2017).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000724

  21. Hany, Najwa F. / Hantouche, Elie G. / Harajli, Mohamed H. (2015): Axial Stress-Strain Model of CFRP-Confined Concrete under Monotonic and Cyclic Loading. In: Journal of Composites for Construction, v. 19, n. 6 (Dezember 2015).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000557

  22. Hantouche, Elie G. / Sleiman, Sarah A. (2016): Response of double angle and shear endplate connections at elevated temperatures. In: International Journal of Steel Structures, v. 16, n. 2 ( 2016).

    https://doi.org/10.1007/s13296-016-6019-8

  23. Hantouche, Elie G. / Kukreti, Anant R. / Rassati, Gian A. (2012): Investigation of secondary prying in thick built-up T-stub connections using nonlinear finite element modeling. In: Engineering Structures, v. 36 (März 2012).

    https://doi.org/10.1016/j.engstruct.2011.11.030

  24. Hantouche, Elie G. / Rassati, Gian A. / Kukreti, Anant R. / Swanson, James A. (2012): Built-up T-stub connections for moment resisting frames: Experimental and finite element investigation for prequalification. In: Engineering Structures, v. 43 (Oktober 2012).

    https://doi.org/10.1016/j.engstruct.2012.05.015

  25. Hantouche, Elie G. / Kukreti, Anant R. / Rassati, Gian A. / Swanson, James A. (2015): Prying Models for Strength in Thick-Flange Built-Up T-Stubs with Complete Joint Penetration and Fillet Welds. In: Journal of Structural Engineering (ASCE), v. 141, n. 2 (Februar 2015).

    https://doi.org/10.1061/(asce)st.1943-541x.0001051

  26. Harajli, Mohamed H. / Hantouche, Elie G. (2015): Effect of Active versus Passive Confinement on Seismic Response of Wide RC Columns with Lap Splices. In: Journal of Structural Engineering (ASCE), v. 141, n. 9 (September 2015).

    https://doi.org/10.1061/(asce)st.1943-541x.0001196

  27. Hany, Najwa F. / Hantouche, Elie G. / Harajli, Mohamed H. (2016): Finite element modeling of FRP-confined concrete using modified concrete damaged plasticity. In: Engineering Structures, v. 125 (Oktober 2016).

    https://doi.org/10.1016/j.engstruct.2016.06.047

  28. Morovat, Mohammed Ali / El Ghor, Ahmad H. / Hantouche, Elie G. (2018): Time-Dependent Response of Flush Endplate Connections to Fire Temperatures. In: Journal of Structural Engineering (ASCE), v. 144, n. 4 (April 2018).

    https://doi.org/10.1061/(asce)st.1943-541x.0002006

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine