Cheon-Goo Han
- (2017): Hydrometer법을 이용한 밀도 측정값과 시험 성적서간 상관분석을 통한 플라이애시의 품질특성 분석 (Quality Analysis of Fly Ash Through Correlation between Density by Hydrometer and Test Report). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 17, n. 4 (August 2017).
- (2017): 모르타르 배합비별 각종 유지류 침지에 따른 열화저항성 (Anti-degradation of Various Mortar Mixtures Depending on Oil Submerging Conditions). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 17, n. 3 (Juni 2017).
- (2017): 동절기 벽식구조 건축물 벽부분의 버블시트 포설방법 변화가 이음부 노출철근의 온도에 미치는 영향 (Influence of Bubble Sheet Applying Methods on Temperature of Exposed Joint Rebar at Wall Surface of Load-Bearing Wall Structure Building During Winter). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 17, n. 2 (April 2017).
- (2017): 섬유 및 ERCO 혼입율 변화에 따른 HPFRCC의 기초적 특성 및 자기수축 저감 (Fundamental Properties and Reduction of Autogenous Shrinkage of HPFRCC Depending on Various Fiber Contents and ERCO Dosages). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 17, n. 1 (Februar 2017).
- (2016): 버블시트 피복양생법에 의한 소성 및 건조수축 균열저감 (Plastic and Drying Shrinkage Cracking Reduction by the Bubble Sheet Curing). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 16, n. 3 (Juni 2016).
- (2015): 석회암 폐석 굵은골재를 사용한 고강도 콘크리트의 시공 (Construction Performance of High Strength Concrete Utilizing Wasted Limestone Coarse Aggregates). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 15, n. 6 (Dezember 2015).
- (2015): 고로슬래그 미분말의 산지 및 치환율 변화가 순환잔골재 사용 시멘트 모르타르의 특성에 미치는 영향 (Effect of the Replacement Ratio and Sources of Blast Furnace Slag Powder on the Fundamental Properties of Recycled Fine Aggregates Based Mortar). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 15, n. 3 (Juni 2015).
- (2015): 고로슬래그 미분말과 순환잔골재를 사용하는 친환경 모르타르에 탈황석고 및 시멘트에 의한 품질향상 (Improving Quality of Eco-Mortar Incorporating Blast Furnace Slag and Recycled Aggregate Depending on Replacement Gypsum and Cement). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 15, n. 2 (April 2015).
- (2013): Surface Finishability of Concrete According to Degree of Damage and the Number of Uses of the Aluminum Form. In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 13, n. 6 (Dezember 2013).
- (2013): Cause of Surface voids in Concrete Attached to an Aluminum Form, and Measures for Prevention. In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 13, n. 5 (Oktober 2013).
- (2013): Analysis of the Efficiency of Improved Bubble Sheet for Heat Curing in Cold Weather. In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 13, n. 1 (Februar 2013).
- (2013): Manufacturing Zero-Cement Bricks by Replacing Cement with Recycled Aggregates and Blast Furnace Slag Powder. In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 13, n. 1 (Februar 2013).
- (2012): Development of Efficient Curing Sheet for Thermal Insulation Curing of Concrete in Cold Weather. In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 12, n. 3 (Juni 2012).
- (2012): 시멘트 입도계수(CFM)가 콘크리트의 기초적 특성에 미치는 영향 (Effects of Cement Fineness Modulus (CFM) on the Fundamental Properties of Concrete). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 12, n. 3 (Juni 2012).
- (2012): 순환잔골재와 플라이애시를 사용하는 무 시멘트 모르타르의 특성에 미치는 순환골재 미분말의 영향 (Effect of Recycled Aggregates Powder on the Properties of Zero Cement Mortar Using the Recycled Fine Aggregates and Fly-Ash). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 12, n. 2 (April 2012).
- (2008): 섬유의 종류 및 온도가열곡선 변화에 따른 콘크리트의 내화특성 (Fire Resistance of the Concrete Corresponding to the Various Fiber Contents and Heating Curves). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 8, n. 5 (Oktober 2008).
- (2008): AE 감수제 과다첨가가 콘크리트의 물리적 특성에 미치는 영향 (Influence of Over-Added AE Water Reducing Agent on Physical Properties of the Concrete). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 8, n. 1 (Februar 2008).
- (2007): 나일론 및 셀룰로스 섬유 혼입률 변화가 콘크리트의 공학적 특성에 미치는 영향 (Effect of the Nylon and Cellulose Fiber Contents on the Mechanical Properties of the Concrete). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 7, n. 3 (September 2007).
- (2007): 등가재령방법에 의한 혼화재 종류별 콘크리트의 압축강도 증진해석 (Estimation of the Compressive Strength of the Concrete incorporating Mineral Admixture based on the Equivalent Age Method). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 7, n. 1 (März 2007).
- (2007): 건조수축 저감형 유동화제 및 2 중 버블시트를 사용한 콘크리트의 현장적용 (Field Application of the Concrete with the Combination of Drying Shrinkage-Reducing Superplasticizer and Double Layer Bubble Sheet). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 7, n. 1 (März 2007).
- (2005): 수축저감제를 사용한 콘크리트의 물성변화 및 건조수축 저감 특성 (Physical Properties and Drying Shrinkage of Concrete Using Shrinkage Reducing Admixtures). In: Journal of the Korea Institute of Building Construction (한국건축시공학회지), v. 5, n. 3 (September 2005).
- (2012): Relationship between inter-aggregate spacing and the optimum fiber length for spalling protection of concrete in fire. In: Cement and Concrete Research, v. 42, n. 3 (März 2012).
- (2010): Synergistic effect of combined fibers for spalling protection of concrete in fire. In: Cement and Concrete Research, v. 40, n. 10 (Oktober 2010).
- (2005): Performance of spalling resistance of high performance concrete with polypropylene fiber contents and lateral confinement. In: Cement and Concrete Research, v. 35, n. 9 (September 2005).
- (2009): Improvement of residual compressive strength and spalling resistance of high-strength RC columns subjected to fire. In: Construction and Building Materials, v. 23, n. 1 (Januar 2009).
- (2011): Construction application of Fibre/Mesh method for protecting concrete columns in fire. In: Construction and Building Materials, v. 25, n. 6 (Juni 2011).
- (2012): Combining polypropylene and nylon fibers to optimize fiber addition for spalling protection of high-strength concrete. In: Construction and Building Materials, v. 34 (September 2012).
- (2012): Limited effect of diameter of fibres on spalling protection of concrete in fire. In: Materials and Structures, v. 45, n. 3 (März 2012).
- (2011): Critical parameters of nylon and other fibres for spalling protection of high strength concrete in fire. In: Materials and Structures, v. 44, n. 3 (April 2011).
- (2015): Combined fiber technique for spalling protection of concrete column, slab and beam in fire. In: Materials and Structures, v. 48, n. 10 (Oktober 2015).
Structurae kooperiert mit
