Asghar Habibnejad korayem 
- (2024): Fresh and hardened properties of 3D printing mortar modified by halloysite nanotube. In: Journal of Building Engineering, v. 93 (September 2024).
- (2024): Amorphous Carbon Powder for Performance Enhancement of Sulfur Mortar: Alternative Fabrication Method. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 6 (Juni 2024).
- (2024): Mechanical and environmental performances of an epoxy-resin-based recycled artificial stone containing hazardous sediment. In: Journal of Building Engineering, v. 82 (April 2024).
- (2024): Effect of Rice Husk Ash on Dispersion of Graphene Oxide in Alkaline Cementitious Environment. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 3 (März 2024).
- (2024): Influence of coating recycled aggregate surface with different pozzolanic slurries on mechanical performance, durability, and micro-structure properties of recycled aggregate concrete. In: Journal of Building Engineering, v. 83 (April 2024).
- (2023): Utilizing halloysite nanotube to enhance the properties of cement mortar subjected to freeze-thaw cycles. In: Journal of Building Engineering, v. 75 (September 2023).
- (2023): Influence of ground granulated blast furnace slag on mechanical properties and durability of graphene oxide‐reinforced cementitious mortars. In: Structural Concrete, v. 24, n. 5 (Oktober 2023).
- (2022): Investigating the potential of trass-cement binary blend for enhancing microscopic properties, macroscopic performance, and sustainability of cement paste. In: Construction and Building Materials, v. 354 (November 2022).
- (2022): Predicting mechanical properties of carbon nanotube-reinforced cementitious nanocomposites using interpretable ensemble learning models. In: Construction and Building Materials, v. 354 (November 2022).
- (2022): Understanding the magnetizing process of water and its effects on cementitious materials: A critical review. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Evaluation of the phase composition, microstructure, mechanical performance, and resistance to acid attack of blended cement paste composed of binary trass-cement system. In: Construction and Building Materials, v. 333 (Mai 2022).
- (2021): Using graphene oxide to improve physical property and control ASR expansion of cement mortar. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Investigation of ultrasonication energy effect on workability, mechanical properties and pore structure of halloysite nanotube reinforced cement mortars. In: Construction and Building Materials, v. 304 (Oktober 2021).
- (2021): Environmental and mechanical impacts of waste incinerated acidic sludge ash as filler in hot mix asphalt. In: Case Studies in Construction Materials, v. 14 (Juni 2021).
- (2021): The synergic effects of metakaolin and polycarboxylate-ether on dispersion of graphene oxide in cementitious environments and macro-level properties of graphene oxide modified cement composites. In: Construction and Building Materials, v. 270 (Februar 2021).
- (2021): The halloysite nanotube effects on workability, mechanical properties, permeability and microstructure of cementitious mortar. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2021): Simultaneous effects of nano-silica and basalt fiber on mechanical properties and durability of cementitious mortar: An Experimental Study. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 48, n. 10 (Oktober 2021).
- (2020): Microstructural study and surface properties of concrete pavements containing nanoparticles. In: Construction and Building Materials, v. 262 (November 2020).
- (2021): The effects of graphene oxide-silica nanohybrids on the workability, hydration, and mechanical properties of Portland cement paste. In: Construction and Building Materials, v. 266 (Januar 2021).
- (2020): Bond Behavior between BFRP Rebar and Seawater Sea Sand Concrete. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): High-performance cement containing nanosized Fe3O4–decorated graphene oxide. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Laboratory evaluation of stone mastic asphalt containing amorphous carbon powder as filler material. In: Construction and Building Materials, v. 243 (Mai 2020).
- (2020): Aging Evaluation of Amorphous Carbon-Modified Asphalt Binders Using Rheological and Chemical Approach. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 1 (Januar 2020).
- (2019): Graphene oxide in ceramic-based layered structure: Nanosheet optimization. In: Construction and Building Materials, v. 224 (November 2019).
- (2019): Effects of Spraying Various Nanoparticles at Early Ages on Improving Surface Characteristics of Concrete Pavements. In: International Journal of Civil Engineering, v. 17, n. 9 (Februar 2019).
- (2016): Incorporation of graphene oxide and silica fume into cement paste: A study of dispersion and compressive strength. In: Construction and Building Materials, v. 123 (Oktober 2016).
- (2017): Evaluating the effect of amorphous carbon powder on moisture susceptibility and mechanical resistance of asphalt mixtures. In: Construction and Building Materials, v. 152 (Oktober 2017).
- (2018): Physical and chemical effects of siliceous particles at nano, micro, and macro scales on properties of self-consolidating mortar overlays. In: Construction and Building Materials, v. 189 (November 2018).
- (2018): Rutting and fatigue performance of asphalt mixtures containing amorphous carbon as filler and binder modifier. In: Construction and Building Materials, v. 188 (November 2018).
- (2018): A review of the impact of micro- and nanoparticles on freeze-thaw durability of hardened concrete: Mechanism perspective. In: Construction and Building Materials, v. 186 (Oktober 2018).
Structurae kooperiert mit
