Rui Guo 
- (2024): Fiber Reinforced Polymer (FRP) Composites for Construction. In: Buildings, v. 14, n. 10 (8 Oktober 2024).
- (2025): Numerical and experimental investigation on active hydraulic tensioner system for a TLP under tether fails condition. In: Marine Structures, v. 99 (Januar 2025).
- (2024): Experimental study on the mechanical properties and impermeability of basalt-PVA hybrid fibre reinforced concrete. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Mechanical properties evaluation of glass fiber reinforced thermoplastic composite plate under combined bending loading and water immersion. In: Construction and Building Materials, v. 440 (August 2024).
- (2024): Flexural behaviour of precast reinforced concrete beams bonded to steel-reinforced engineered cementitious composites. In: Structures, v. 66 (August 2024).
- (2024): Impact of residential heat pumps and photovoltaics on low-voltage grid reinforcements under varying insulation levels. In: Energy and Buildings, v. 318 (September 2024).
- (2024): Long-term properties evolution and life prediction of glass fiber reinforced thermoplastic bending bars exposed in concrete alkaline environment. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Experimental study on the mechanical properties of reinforced engineered cementitious composites. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): Investigation on indoor airflow and contaminant dispersion of diffuse ceiling ventilation in heating and cooling modes. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2023): Identification of Urban Spatial Form Based on Multimode Transit Travel Features. In: Journal of Urban Planning and Development, v. 149, n. 3 (September 2023).
- (2022): Experimental study on the mechanical behaviour of short chopped basalt fibre reinforced concrete beams. In: Structures, v. 45 (November 2022).
- (2022): Method to predict the interlayer shear strength of asphalt pavement based on improved back propagation neural network. In: Construction and Building Materials, v. 351 (Oktober 2022).
- (2022): Influence of Propagation Distance on Characteristic Parameters of Acoustic Emission Signals in Concrete Materials Based on Low-Frequency Sensor. In: Advances in Civil Engineering, v. 2022 (Januar 2022).
- (2022): Mechanical performance evolution and life prediction of prestressed CFRP plate exposed to hygrothermal and freeze-thaw environments. In: Composite Structures, v. 293 (August 2022).
- (2022): Monitoring the damage evolution of reinforced concrete during tunnel boring machine hoisting by acoustic emission. In: Construction and Building Materials, v. 327 (April 2022).
- (2022): Indices relation and statistical probability analysis of physical and mechanical performance of asphalt mixtures. In: Case Studies in Construction Materials, v. 16 (Juni 2022).
- (2022): Improved three-dimensional discrete modeling method and anti-cracking properties of asphalt mixture. In: Construction and Building Materials, v. 321 (Februar 2022).
- (2018): Influence of residual stress and heterogeneity on mechanical field at crack tips in safety end of nuclear power plant. In: Procedia Structural Integrity, v. 13 ( 2018).
- (2022): Hygrothermal resistance of pultruded carbon, glass and carbon/glass hybrid fiber reinforced epoxy composites. In: Construction and Building Materials, v. 315 (Januar 2022).
- (2018): Force and Deformation of a Shallow Soil-Buried Super-Long Box Culvert during Jacking Construction on a Highway. In: Journal of Highway and Transportation Research and Development (English Edition), v. 12, n. 2 (Juni 2018).
- (2019): Influence of design parameters on the night ventilation performance in office buildings based on sensitivity analysis. In: Sustainable Cities and Society, v. 50 (Oktober 2019).
- (2019): Life cycle assessment of white roof and sedum-tray garden roof for office buildings in China. In: Sustainable Cities and Society, v. 46 (April 2019).
- (2021): Experimental study on flexural shear strengthening effect on low-strength RC beams by using FRP grid and ECC. In: Engineering Structures, v. 227 (Januar 2021).
- (2020): Influence of Multiple Factors on the Shear Fatigue Resistance of Asphalt Pavement Interlayer Adhesive Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 9 (September 2020).
- (2020): Innovative compound-type anchorage system for a large-diameter pultruded carbon/glass hybrid rod for bridge cable. In: Materials and Structures, v. 53, n. 4 (26 Juni 2020).
- (2020): Mechanical performance test and finite element analysis of prefabricated utility tunnel L‐shaped joint. In: The Structural Design of Tall and Special Buildings, v. 29, n. 11 (10 August 2020).
- (2020): Friction coefficient and stress–strain on a soil-buried box culvert jacking in highway construction. In: Advances in Structural Engineering, v. 23, n. 9 (Februar 2020).
- (2019): The Morphology Changes of Indentations in Press-in Tests of SS304 Under Tensile Stress. In: International Journal of Offshore and Polar Engineering, v. 29, n. 3 (1 September 2019).
- (2019): Flame retardant and its influence on the performance of asphalt – A review. In: Construction and Building Materials, v. 212 (Juli 2019).
- (2019): Model test study of the mechanical characteristics of the lining structure for an urban deep drainage shield tunnel. In: Tunnelling and Underground Space Technology, v. 91 (September 2019).
Structurae kooperiert mit
