Xianglin Gu
- (2025): A probabilistic stress-strain relationship model for steel bars including the non-uniform corrosion effects in chloride environments. In: Case Studies in Construction Materials, v. 22 (Juli 2025).
- (2024): Lateral hysteretic behavior of precast concrete shear walls with unjointed vertical distribution bars and opening. In: Engineering Structures, v. 305 (April 2024).
- (2016): In-Plane Seismic Performance of Chinese Traditional Rowlock Cavity Walls under Low-Cycle Loading. In: International Journal of Architectural Heritage, v. 10, n. 2-3 (Januar 2016).
- : Potential change of failure modes and time-dependent behavior of RC beams under a marine atmospheric environment. In: Structure and Infrastructure Engineering.
- (2015): Numerical simulation of moisture transport in concrete based on a pore size distribution model. In: Cement and Concrete Research, v. 67 (Januar 2015).
- (2021): Force–displacement relationship modelling of masonry infill walls with openings in hinged steel frames. In: Bulletin of Earthquake Engineering, v. 20, n. 1 (November 2021).
- (2021): Progressive collapse resistance of RC T-beam cable subassemblages under a middle-column-removal scenario. In: Journal of Building Engineering, v. 42 (Oktober 2021).
- (2019): Modeling time-dependent circumferential non-uniform corrosion of steel bars in concrete considering corrosion-induced cracking effects. In: Engineering Structures, v. 201 (Dezember 2019).
- (2021): Probability distribution model of stress impact factor for corrosion pits of high-strength prestressing wires. In: Engineering Structures, v. 230 (März 2021).
- (2016): Flexural behavior of preloaded reinforced concrete beams strengthened by prestressed CFRP laminates. In: Composite Structures, v. 157 (Dezember 2016).
- (2020): Heat Activated SMA-CFRP Composites for Fatigue Strengthening of Cracked Steel Plates. In: Journal of Composites for Construction, v. 24, n. 6 (Dezember 2020).
- (2018): Polarization behavior of activated reinforcing steel bars in concrete under chloride environments. In: Construction and Building Materials, v. 164 (März 2018).
- (2019): Modes, Mechanisms, and Likelihood of Seismic Shear Failure in Rectangular Reinforced Concrete Columns. In: Journal of Structural Engineering (ASCE), v. 145, n. 10 (Oktober 2019).
- (2014): Prediction of ground motion due to the collapse of a large-scale cooling tower under strong earthquakes. In: Soil Dynamics and Earthquake Engineering, v. 65 (Oktober 2014).
- (2004): Experimental Study on Damage of Concrete Subjected to Repeated Loading after Exposure to Elevated Temperatures. Vorgetragen bei: IABSE Symposium: Metropolitan Habitats and Infrastructure, Shanghai, China, 22-24 September 2004.
- (2016): Experimental Study of Diffusivity of the Interfacial Transition Zone between Cement Paste and Aggregate. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 10 (Oktober 2016).
- (2014): Probability Distribution Model for Cross-Sectional Area of Corroded Reinforcing Steel Bars. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 5 (Mai 2014).
- (2018): Modeling of Shear Behavior of Reinforced Concrete Beams with Corroded Stirrups Strengthened with FRP Sheets. In: Journal of Composites for Construction, v. 22, n. 5 (Oktober 2018).
- (2013): Mechanical Behavior of FRP-Strengthened Concrete Columns Subjected to Concentric and Eccentric Compression Loading. In: Journal of Composites for Construction, v. 17, n. 3 (Juni 2013).
- (2011): Fatigue of Reinforcing Steel Bars Subjected to Natural Corrosion. In: The Open Civil Engineering Journal, v. 5, n. 1 ( 2011).
- (2012): Mechanical behaviour of cast-in situ reinforced concrete slabs with control joints. In: Construction and Building Materials, v. 28 (März 2012).
- (2012): Numerical analysis of the effect of coarse aggregate distribution on concrete carbonation. In: Construction and Building Materials, v. 37 (Dezember 2012).
- (2014): Influence of aggregate surface roughness on mechanical properties of interface and concrete. In: Construction and Building Materials, v. 65 (August 2014).
- (2015): Modeling of carbonation in tensile zone of plain concrete beams damaged by cyclic loading. In: Construction and Building Materials, v. 77 (Februar 2015).
- (2015): Mesoscale model for thermal conductivity of concrete. In: Construction and Building Materials, v. 98 (November 2015).
- (2016): Fatigue behavior of corroded prestressed concrete beams. In: Construction and Building Materials, v. 106 (März 2016).
- (2017): Multi-walled carbon nanotube reinforced mortar-aggregate interfacial properties. In: Construction and Building Materials, v. 133 (Februar 2017).
- (2017): Mesoscopic Predictions of Cement Mortar Diffusivity by Analytical and Numerical Methods. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 4 (April 2017).
- (2017): Load-Carrying Capacity of Lengthwise Cracked Wood Beams Retrofitted by Self-Tapping Screws. In: Journal of Structural Engineering (ASCE), v. 143, n. 6 (Juni 2017).
- (2017): Failure of wall–slab joint in unreinforced masonry building. In: Advances in Structural Engineering, v. 20, n. 5 (April 2017).
Structurae kooperiert mit
