Michael Griffith 
- (2023): Experimental and analytical studies of size effects on compressive ductility response of Ultra-High-Performance Fiber-Reinforced concrete. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Simulated seismic testing of two pitched roofs constructed using timber trusses extracted from vintage unreinforced masonry buildings. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 14 (6 Oktober 2023).
- (2014): The Demise of the URM Building Stock in Christchurch during the 2010–2011 Canterbury Earthquake Sequence. In: Earthquake Spectra, v. 30, n. 1 (Februar 2014).
- (2022): A damage-plasticity based interface model for simulating in-plane/out-of-plane response of masonry structural panels. In: Computers & Structures, v. 260 (Februar 2022).
- (2021): Feasibility of 3DP cob walls under compression loads in low-rise construction. In: Construction and Building Materials, v. 301 (September 2021).
- (2014): Strategies for reducing heating and cooling loads of uninsulated rammed earth wall houses. In: Energy and Buildings, v. 77 (Juli 2014).
- (2015): Design optimization of insulated cavity rammed earth walls for houses in Australia. In: Energy and Buildings, v. 86 (Januar 2015).
- (2018): Seismic behavior of RC columns flexurally strengthened with FRP sheets and FRP anchors. In: Composite Structures, v. 203 (November 2018).
- (2019): 'Digital image correlation (DIC) for measurement of strains and displacements in coarse, low volume-fraction FRP composites used in civil infrastructure. In: Composite Structures, v. 212 (März 2019).
- (2019): Strengthening RC structures using FRP spike anchors in combination with EBR systems. In: Composite Structures, v. 209 (Februar 2019).
- (2019): Experimental testing and design model for bent FRP anchors exhibiting fiber rupture failure mode. In: Composite Structures, v. 210 (Februar 2019).
- (2019): Straight FRP anchors exhibiting fiber rupture failure mode. In: Composite Structures, v. 207 (Januar 2019).
- (2014): Achieving thermal comfort in naturally ventilated rammed earth houses. In: Building and Environment, v. 82 (Dezember 2014).
- (2015): Feasibility of rammed earth constructions for seismic loads in Australia. In: Australian Journal of Structural Engineering, v. 16, n. 4 (Oktober 2015).
- (2019): Estimating near surface shear wave velocity using the SPAC method at a site exhibiting low to high impedance contrast. In: Soil Dynamics and Earthquake Engineering, v. 122 (Juli 2019).
- (2018): Seismic site classification based on constrained modeling of measured HVSR curve in regolith sites. In: Soil Dynamics and Earthquake Engineering, v. 110 (Juli 2018).
- (2010): Inelastic Displacement Demand of Strength-Degraded Structures. In: Journal of Earthquake Engineering, v. 14, n. 4 ( 2010).
- (2013): In-Plane Shear Improvement of Unreinforced Masonry Wall Panels Using NSM CFRP Strips. In: Journal of Composites for Construction, v. 17, n. 6 (Dezember 2013).
- (2015): Earthquake Performance of Two Vintage URM Buildings Retrofitted Using Surface Bonded GFRP: Case Study. In: Journal of Composites for Construction, v. 19, n. 5 (Oktober 2015).
- (2012): The Tension Stiffening Mechanism in Reinforced Concrete Prisms. In: Advances in Structural Engineering, v. 15, n. 12 (Dezember 2012).
- (2014): Out-of-plane strengthening of unreinforced masonry walls using near surface mounted fibre reinforced polymer strips. In: Engineering Structures, v. 59 (Februar 2014).
- (2015): Performance of Posttensioned Seismic Retrofit of Two Stone Masonry Buildings during the Canterbury Earthquakes. In: Journal of Performance of Constructed Facilities (ASCE), v. 29, n. 4 (August 2015).
- (2013): Simulation of Retrofitted Unreinforced Concrete Masonry Unit Walls under Blast Loading. In: International Journal of Protective Structures, v. 4, n. 1 (März 2013).
Structurae kooperiert mit
