Ernesto Grande 
- (2024): Mechanistic model for the compression strength prediction of masonry columns strengthened with fibre–polymer composites. In: Composite Structures, v. 338 (Juni 2024).
- (2024): 3D-printing for the rehabilitation and health monitoring of structures with FBG: Experimental tests. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2024): Fragility curves for the seismic assessment of masonry buildings in historic centres prone to out-of-plane failure modes. In: Bulletin of Earthquake Engineering, v. 22, n. 4 (Januar 2024).
- (2023): Exploring new frontiers in gridshell design: The FreeGrid benchmark. In: Structures, v. 58 (Dezember 2023).
- (2023): Modeling of shear-lap tests of flat and curved masonry specimens strengthened by FRCM. In: Structures, v. 52 (Juni 2023).
- (2023): Fragility curves for residential unreinforced masonry buildings prone to out-of-plane mechanisms: the case of the historical center of Sora. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): FRCM-to-masonry bonding behaviour in the case of curved surfaces: experimental investigation. In: Composite Structures, v. 313 (Juni 2023).
- (2022): Design optimization of gridshells equipped with pre-tensioned rods. In: Journal of Building Engineering, v. 52 (Juli 2022).
- (2022): Experimental characterization of the textile-to-mortar bond through distributed optical sensors. In: Construction and Building Materials, v. 326 (April 2022).
- (2022): Micro-mechanical FE modelling and constitutive parameters calibration of masonry panels strengthened with CFRP sheets. In: Composite Structures, v. 285 (April 2022).
- (2018): The influence of the joint thickness on the adhesion between CFRP reinforcements and masonry arches. In: Procedia Structural Integrity, v. 11 ( 2018).
- (2021): Fragility curves at regional basis for unreinforced masonry buildings prone to out-of-plane mechanisms: the case of Central Italy. In: Structures, v. 34 (Dezember 2021).
- (2021): Debonding mechanism of FRP strengthened flat surfaces: Analytical approach and closed form solution. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Mechanical model based on a BVP for FRPs applied on flat and curved masonry pillars with anchor spikes. In: Composite Structures, v. 273 (Oktober 2021).
- (2021): A macro-modelling approach for RC beam-column exterior joints: first results on monotonic behaviour. In: Journal of Building Engineering, v. 39 (Juli 2021).
- (2021): Modeling of FRCM strengthening systems externally applied on curved masonry substrates. In: Engineering Structures, v. 233 (April 2021).
- (2021): Influence of geometric imperfections on the efficacy of optimization approaches for grid-shells. In: Engineering Structures, v. 228 (Februar 2021).
- (2014): A data fusion based approach for damage detection in linear systems. In: Frattura ed Integrità Strutturale, v. 8, n. 29 (Juli 2014).
- (2020): Development of an interface numerical model for C-FRPs applied on flat and curved masonry pillars. In: Composite Structures, v. 241 (Juni 2020).
- (2018): Micro-mechanical FE numerical model for masonry curved pillars reinforced with FRP strips subjected to single lap shear tests. In: Composite Structures, v. 201 (Oktober 2018).
- (2018): Coupled interface-based modelling approach for the numerical analysis of curved masonry specimens strengthened by CFRP. In: Composite Structures, v. 200 (September 2018).
- (2020): Heterogeneous FE model for single lap shear tests on FRP reinforced masonry curved pillars with spike anchors. In: Construction and Building Materials, v. 258 (Oktober 2020).
- (2020): Modeling of the Tensile Behavior FRCM Systems for Repair and Strengthening Interventions of Masonry Structures. In: Frontiers in Built Environment, v. 6 (Januar 2020).
- (2019): Historical masonry building aggregates: advanced numerical insight for an effective seismic assessment on two row housing compounds. In: Engineering Structures, v. 190 (Juli 2019).
- (2009): Effect of Transverse Steel on the Response of RC Beams Strengthened in Shear by FRP: Experimental Study. In: Journal of Composites for Construction, v. 13, n. 5 (Oktober 2009).
- (2015): Investigation on the bond behavior of clay bricks reinforced with SRP and SRG strengthening systems. In: Materials and Structures, v. 48, n. 11 (November 2015).
- (2013): Experimental investigation and numerical analysis of tuff-brick listed masonry panels. In: Materials and Structures, v. 46, n. 1-2 (Januar 2013).
- (2011): A Beam Finite Element for Nonlinear Analysis of Masonry Elements With or Without Fiber-Reinforced Plastic (FRP) Reinforcements. In: International Journal of Architectural Heritage, v. 5, n. 6 (November 2011).
- (2018): Design of SMA-Brace Devices for the Seismic Retrofit of Steel CBF. In: The Open Civil Engineering Journal, v. 12, n. 1 (September 2018).
- (2012): data-driven approach for damage detection: an application to the ASCE steel benchmark structure. In: Journal of Civil Structural Health Monitoring, v. 2, n. 2 (August 2012).
Structurae kooperiert mit
