Elhem Ghorbel 
- (2010): The mini-conical slump flow test: Analysis and numerical study. In: Cement and Concrete Research, v. 40, n. 10 (Oktober 2010).
- (2023): Effect of 10% recycled sands from various storage sites on the mortar’s properties. In: European Journal of Environmental and Civil Engineering, v. 27, n. 14 (März 2023).
- (2022): Constitutive behaviour of masonry prisms using a full-field measurement technique. In: Structures, v. 46 (Dezember 2022).
- (2021): Performance of metakaolin/slag-based geopolymer concrete made with recycled fine and coarse aggregates. In: Journal of Building Engineering, v. 42 (Oktober 2021).
- (2021): Effect of Used Engine Oil Addition on the Rheological Properties of a Plastic Bag Waste–Modified 40/50 Grade Bitumen. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (März 2021).
- (2021): Effect of Curing Conditions on the Performance of Geopolymer Concrete Based on Granulated Blast Furnace Slag and Metakaolin. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (März 2021).
- (2020): Formulation parameters effects on the performances of concrete equivalent mortars incorporating different ratios of recycled sand. In: Journal of Building Physics, v. 43, n. 6 (Mai 2020).
- (2011): Analysis of concrete internal deterioration due to frost action. In: Journal of Building Physics, v. 35, n. 1 (Juli 2011).
- (2020): Experimental Investigation on Out-of-Plane Flexural and Shear Performance of Half Steel-Concrete Slabs. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Phase separation and thermal degradation of plastic bag waste modified bitumen during high temperature storage. In: Construction and Building Materials, v. 239 (April 2020).
- (2019): Mechanical and fracture properties of recycled aggregate concrete in design codes and empirical models. In: Structural Concrete, v. 20, n. 6 (Dezember 2019).
- (2019): Comparative experimental study of concrete reparation with carbon epoxy & bio-resourced composites. In: Construction and Building Materials, v. 210 (Juni 2019).
- (2012): Interfacial Bond Strength Characteristics of FRP and RC Substrate. In: Journal of Composites for Construction, v. 16, n. 1 (Februar 2012).
- (2018): Mix Design and Recycled Aggregates Effects on the Concrete's Properties. In: International Journal of Civil Engineering, v. 16, n. 8 (Mai 2018).
- (2008): Effects of the manufacturing process on the performances of the bituminous binders modified with EVA. In: Construction and Building Materials, v. 22, n. 6 (Juni 2008).
- (2011): Optimization of the formulation of micro-polymer concretes. In: Construction and Building Materials, v. 25, n. 4 (April 2011).
- (2012): Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250°C. In: Construction and Building Materials, v. 27 (Februar 2012).
- (2016): The possibility of using dredging sludge in manufacturing cements: Optimization of heat treatment cycle and ratio replacement. In: Construction and Building Materials, v. 106 (März 2016).
- (2017): Effect of freeze – Thaw cycles on the physicomechanical properties of a pozzolanic mortar. In: Construction and Building Materials, v. 134 (März 2017).
- (2017): Influence of recycled coarse aggregates incorporation on the fracture properties of concrete. In: Construction and Building Materials, v. 154 (November 2017).
- (2017): Effects of recycled sand on the properties and durability of polymer and cement based mortars. In: Construction and Building Materials, v. 153 (Oktober 2017).
- (2019): Optimization approach of granulated blast furnace slag and metakaolin based geopolymer mortars. In: Construction and Building Materials, v. 198 (Februar 2019).
- (2014): Mix Design and Properties of Recycled Aggregate Concretes: Applicability of Eurocode 2. In: International Journal of Concrete Structures and Materials, v. 9, n. 1 (November 2014).
- (2009): Incorporation of Crushed Sands and Tunisian Desert Sands in the Composition of Self Compacting Concretes Part II: SCC Fresh and Hardened States Characteristics. In: International Journal of Concrete Structures and Materials, v. 3, n. 1 (Juni 2009).
- (2009): Incorporation of CrusHed Sands and Tunisian Desert Sands in the Composition of Self Compacting Concretes Part I: Study of Formulation. In: International Journal of Concrete Structures and Materials, v. 3, n. 1 (Juni 2009).
- (2016): Durability to Chemical Attack by Acids of Epoxy Microconcretes by Comparison to Cementitious Ones. In: Advances in Civil Engineering, v. 2016 ( 2016).
- (2013): Micromechanical modelling of the elastic behaviour of polymer mortars. In: European Journal of Environmental and Civil Engineering, v. 17, n. 2 ( 2013).
- (2008): Fluage des bétons bitumineux. Influence de la classe du bitumen et du dosage en poudrette de caoutchouc. In: European Journal of Environmental and Civil Engineering, v. 12, n. 3 (März 2008).
- (2018): Influence of flame retardant addition on the durability of epoxy based polymer concrete after exposition to elevated temperature. In: Construction and Building Materials, v. 192 (Dezember 2018).
- (2017): Experimental and analytical study of bond behavior between recycled aggregate concrete and steel bars using a pullout test. In: Structural Concrete, v. 18, n. 5 (Oktober 2017).
Structurae kooperiert mit
