Hua Ge 
- (2024): Erratum to “Component-based SHGC determination of BIPV glazing for product comparison” [Energy Build. 320 (2024) 114592]. In: Energy and Buildings, v. 324 (Dezember 2024).
- (2024): Component-based SHGC determination of BIPV glazing for product comparison. In: Energy and Buildings, v. 320 (Oktober 2024).
- (2024): Achieving carbon neutrality at single and multi-building complex levels – A review. In: Energy and Buildings, v. 314 (Juli 2024).
- (2024): Assessing the effectiveness of building retrofits in reducing GHG emissions: A Canadian school case study. In: Journal of Building Engineering, v. 91 (August 2024).
- (2023): Experimental study of a heat recovery ventilator preheated by a Building Integrated Photovoltaic system in a cold climate. In: Journal of Physics: Conference Series, v. 2654, n. 1 (1 Dezember 2023).
- (2024): CFD modeling of Wind-Driven Rain (WDR) on a mid-rise building in an urban area. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 245 (Februar 2024).
- : Comparing overheating risk and mitigation strategies for two Canadian schools by using building simulation calibrated with measured data. In: Journal of Building Performance Simulation.
- (2023): Effects of thermal mass on transient thermal performance of concrete-based walls and energy consumption of an office building. In: Journal of Building Physics, v. 47, n. 1 (2 Juni 2023).
- (2023): Assessing mould growth risk of wood-frame walls using partial least squares (PLS) regression considering climate model uncertainties. In: Building and Environment, v. 238 (Juni 2023).
- (2023): Feasibility of Planting Trees around Buildings as a Nature-Based Solution of Carbon Sequestration—An LCA Approach Using Two Case Studies. In: Buildings, v. 13, n. 1 (13 Januar 2023).
- (2023): Assessing and mitigating overheating risk in existing Canadian school buildings under extreme current and future climates. In: Energy and Buildings, v. 279 (Januar 2023).
- (2022): Do high energy-efficient buildings increase overheating risk in cold climates? Causes and mitigation measures required under recent and future climates. In: Building and Environment, v. 219 (Juli 2022).
- (2022): Calibration of building model based on indoor temperature for overheating assessment using genetic algorithm: Methodology, evaluation criteria, and case study. In: Building and Environment, v. 207 (Januar 2022).
- (2021): Effect of vapor diffusion port on the hygrothermal performance of wood-frame walls. In: Journal of Building Engineering, v. 39 (Juli 2021).
- (2017): Effect of dynamic modeling of thermal bridges on the energy performance of residential buildings with high thermal mass for cold climates. In: Sustainable Cities and Society, v. 34 (Oktober 2017).
- (2016): Energy positive curtain wall configurations for a cold climate using the Analysis of Variance (ANOVA) approach. In: Building Simulation, v. 9, n. 3 (März 2016).
- (2015): Dynamic effect of thermal bridges on the energy performance of a low-rise residential building. In: Energy and Buildings, v. 105 (Oktober 2015).
- (2015): Determination of optimum insulation thickness for building walls with moisture transfer in hot summer and cold winter zone of China. In: Energy and Buildings, v. 109 (Dezember 2015).
- (2016): Dynamic effect of balcony thermal bridges on the energy performance of a high-rise residential building in Canada. In: Energy and Buildings, v. 116 (März 2016).
- (2018): Field measurements of hygrothermal performance of attics in extreme cold climates. In: Building and Environment, v. 134 (April 2018).
- (2017): Effect of air leakage on the hygrothermal performance of highly insulated wood frame walls: Comparison of air leakage modelling methods. In: Building and Environment, v. 123 (Oktober 2017).
- (2017): Effect of overhang on wind-driven rain wetting of facades on a mid-rise building: Field measurements. In: Building and Environment, v. 118 (Juni 2017).
- (2017): Experimental study of thermal and airtightness performance of structural insulated panel joints in cold climates. In: Building and Environment, v. 115 (April 2017).
- (2015): Experimental and numerical investigations of the effects of air leakage on temperature and moisture fields in porous insulation. In: Building and Environment, v. 94 (Dezember 2015).
- (2012): Evaluation of moisture buffering capacity of interior surface materials and furniture in a full-scale experimental investigation. In: Building and Environment, v. 47 (Januar 2012).
- (2004): Experimental investigation of cold draft induced by two different types of glazing panels in metal curtain walls. In: Building and Environment, v. 39, n. 2 (Februar 2004).
- (2019): Effect of turbulence modeling schemes on wind-driven rain deposition on a mid-rise building: CFD modeling and validation. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 184 (Januar 2019).
- (2014): Effects of roof overhangs on wind-driven rain wetting of a low-rise cubic building: A numerical study. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 125 (Februar 2014).
- (2019): Effect of rain leakage on hygrothermal performance of highly insulated wood framed walls: a stochastic approach. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 46, n. 11 (November 2019).
- (2004): Experimental Evaluation of Thermal Response and Condensation Performance of Metal Curtain Walls Subjected to Air Leakage. In: Journal of Architectural Engineering (ASCE), v. 10, n. 2 (Juni 2004).
Structurae kooperiert mit
