0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Theodore V. Galambos

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Galambos, Theodore V. (2006): Reliability of the Member Stability Criteria in the 2005 AISC Specification. In: Engineering Journal, v. 43, n. 4 (Dezember 2006).

    https://doi.org/10.62913/engj.v43i4.889

  2. Galambos, Theodore V. (2001): The Performance and Design Checking of Chord-Angle Legs in Joist Girders. In: Engineering Journal, v. 38, n. 3 (September 2001).

    https://doi.org/10.62913/engj.v38i3.760

  3. Earls, C. J. / Galambos, Theodore V. (1998): Practical Compactness and Bracing Provisions for the Design of Single Angle Beams. In: Engineering Journal, v. 35, n. 1 (März 1998).

    https://doi.org/10.62913/engj.v35i1.692

  4. Galambos, Theodore V. (1981): Load and Resistance Factor Design. In: Engineering Journal, v. 18, n. 3 (September 1981).

    https://doi.org/10.62913/engj.v18i3.368

  5. Galambos, Theodore V. / Ravindra, M. K. (1978): Proposed Criteria for Load and Resistance Factor Design. In: Engineering Journal, v. 15, n. 1 (März 1978).

    https://doi.org/10.62913/engj.v15i1.304

  6. Galambos, Theodore V. (1972): Load Factor Design of Steel Buildings. In: Engineering Journal, v. 9, n. 3 (September 1972).

    https://doi.org/10.62913/engj.v9i3.187

  7. Galambos, Theodore V. (1964): Lateral Support for Tier Building Frames. In: Engineering Journal, v. 1, n. 1 (März 1964).

    https://doi.org/10.62913/engj.v1i1.5

  8. Lee, George C. / Galambos, Theodore V. (1962): Post-Buckling Strength of Wide-Flange Beams. In: Journal of the Engineering Mechanics Division (ASCE), v. 88, n. 1 (Februar 1962).

    https://doi.org/10.1061/jmcea3.0000280

  9. Galambos, Theodore V. (1960): Influence of Partial Base Fixity on Frame Stability. In: Journal of the Structural Division (ASCE), v. 86, n. 5 (Mai 1960).

    https://doi.org/10.1061/jsdeag.0000523

  10. Dwyer, Timothy J. / Galambos, Theodore V. (1965): Plastic Behavior of Tubular Beams Columns. In: Journal of the Structural Division (ASCE), v. 91, n. 4 (August 1965).

    https://doi.org/10.1061/jsdeag.0001291

  11. Farwell, Charles R. / Galambos, Theodore V. (1969): Nonuniform Torsion of Steel Beams in inelastic Range. In: Journal of the Structural Division (ASCE), v. 95, n. 12 (Dezember 1969).

    https://doi.org/10.1061/jsdeag.0002438

  12. Fisher, John W. / Galambos, Theodore V. / Kulak, Geoffrey L. / Ravindra, Mayasandra K. (1978): Load and Resistance Factor Design Criteria for Connectors. In: Journal of the Structural Division (ASCE), v. 104, n. 9 (September 1978).

    https://doi.org/10.1061/jsdeag.0004986

  13. Ravindra, Mayasandra K. / Galambos, Theodore V. (1978): Load and Resistance Factor Design for Steel. In: Journal of the Structural Division (ASCE), v. 104, n. 9 (September 1978).

    https://doi.org/10.1061/jsdeag.0004981

  14. Cooper, Peter B. / Galambos, Theodore V. / Ravindra, Mayasandra K. (1978): LRFD Criteria for Plate Girders. In: Journal of the Structural Division (ASCE), v. 104, n. 9 (September 1978).

    https://doi.org/10.1061/jsdeag.0004984

  15. Bjorhovde, Reidar / Galambos, Theodore V. / Ravindra, Mayasandra K. (1978): LRFD Criteria for Steel Beam-Columns. In: Journal of the Structural Division (ASCE), v. 104, n. 9 (September 1978).

    https://doi.org/10.1061/jsdeag.0004983

  16. Galambos, Theodore V. / Ravindra, Mayasandra K. (1978): Properties of Steel for Use in LRFD. In: Journal of the Structural Division (ASCE), v. 104, n. 9 (September 1978).

    https://doi.org/10.1061/jsdeag.0004988

  17. Chapuis, Jacques / Galambos, Theodore V. (1982): Reliability of Aluminum Beam-Columns. In: Journal of the Structural Division (ASCE), v. 108, n. 4 (April 1982).

    https://doi.org/10.1061/jsdeag.0005920

  18. Galambos, Theodore V. / Ellingwood, Bruce / MacGregor, James G. / Cornell, C. Allin (1982): Probability Based Load Criteria: Assessment of Current Design Practice. In: Journal of the Structural Division (ASCE), v. 108, n. 5 (Mai 1982).

    https://doi.org/10.1061/jsdeag.0005958

  19. Ellingwood, Bruce / MacGregor, James G. / Galambos, Theodore V. / Cornell, C.Allin (1982): Probability Based Load Criteria: Load Factors and Load Combinations. In: Journal of the Structural Division (ASCE), v. 108, n. 5 (Mai 1982).

    https://doi.org/10.1061/jsdeag.0005959

  20. Galambos, Theodore V. (1975): Load factor design of columns using second moment probabilistic method. Vorgetragen bei: IABSE - ECCS - Column Research Committee of Japan - Column Research Council: International Colloqium on Column Strength, Paris, France, 23-24 November 1972.

    https://doi.org/10.5169/seals-19825

  21. Galambos, Theodore V. / Adams, Peter F. (1969): Material considerations in plastic design. In: IABSE Publications, v. 29, n. 2 ( 1969).

    https://doi.org/10.5169/seals-22915

  22. Driscoll, George C. / Lu, Le-Wu / Galambos, Theodore V. (1968): Research on plastic design of multi-story frames at Lehigh University. Vorgetragen bei: Huitième Congrès de l'AIPC = Eighth Congress of IABSE = Achter Kongress der IVBH, New York, NY, USA, 9-14 September 1968.

    https://doi.org/10.5169/seals-8791

  23. Ellingwood, Bruce / Galambos, Theodore V. (1982): Probability-based criteria for structural design. In: Structural Safety, v. 1, n. 1 (Januar 1982).

    https://doi.org/10.1016/0167-4730(82)90012-1

  24. Galambos, Theodore V. (2000): Recent research and design developments in steel and composite steel–concrete structures in USA. In: Journal of Constructional Steel Research, v. 55, n. 1-3 (Juli 2000).

    https://doi.org/10.1016/s0143-974x(99)00090-5

  25. Lenz, Janet / Ravindra, Mayasandra K. / Galambos, Theodore V. (1973): Reliability based design rules for column buckling. In: Computers & Structures, v. 3, n. 3 (Mai 1973).

    https://doi.org/10.1016/0045-7949(73)90098-9

  26. Lundberg, Jane E. / Galambos, Theodore V. (1996): Load and resistance factor design of composite columns. In: Structural Safety, v. 18, n. 2-3 (Januar 1996).

    https://doi.org/10.1016/0167-4730(96)00009-4

  27. Xykis, Constantine / Galambos, Theodore V. (1990): Lateral torsional stability analysis of large order space frame systems. In: Engineering Structures, v. 12, n. 4 (Oktober 1990).

    https://doi.org/10.1016/0141-0296(90)90022-k

  28. Dishongh, Burl E. / Galambos, Theodore V. (1992): Residual Deformation Analysis for Inelastic Bridge Rating. In: Journal of Structural Engineering (ASCE), v. 118, n. 6 (Juni 1992).

    https://doi.org/10.1061/(asce)0733-9445(1992)118:6(1494)

  29. Ito, Mitsuru / Galambos, Theodore V. (1993): Minimum‐Weight Design of Continuous Composite Girders. In: Journal of Structural Engineering (ASCE), v. 119, n. 4 (April 1993).

    https://doi.org/10.1061/(asce)0733-9445(1993)119:4(1297)

  30. Liao, Minmao / Okazaki, Taichiro / Ballarini, Roberto / Schultz, Arturo E. / Galambos, Theodore V. (2011): Nonlinear Finite-Element Analysis of Critical Gusset Plates in the I-35W Bridge in Minnesota. In: Journal of Structural Engineering (ASCE), v. 137, n. 1 (Januar 2011).

    https://doi.org/10.1061/(asce)st.1943-541x.0000269

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine