Yozo Fujino 
- (2000): Design and Construction of a Cable-Trussed Girder Bridge. In: Transportation Research Record: Journal of the Transportation Research Board, v. 1696, n. 1 (Januar 2000).
- (2022): Displacement response estimation of a cable-stayed bridge subjected to various loading conditions with one-dimensional residual convolutional autoencoder method. In: Structural Health Monitoring, v. 22, n. 3 (September 2022).
- (2016): A Damage Detection Algorithm Utilizing Dynamic Displacement of Bridge under Moving Vehicle. In: Shock and Vibration, v. 2016 ( 2016).
- (1993): Dynamic Characterization Of Multiple Tuned Mass Dampers (MTMD) And Ist Frequency Band Width. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1993, n. 465 ( 1993).
- (1999): Control Of Vortex-induced Vibration Of A Continuous Steel Box Girder In Trans-tokyo Bay Highway. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1999, n. 633 (Oktober 1999).
- (2001): Development Of Non-contact Scanning Vibration Measurement System With Laser Doppler Vibrometer For Existing Structures. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2001, n. 693 ( 2001).
- (2001): Damage Analysis Of Three-span Continuous Girder Bridges In 1995 Hyogo-ken Nambu Earthquake. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2001, n. 668 (Januar 2001).
- (2001): Detection Of Internal Voids In Concrete Structures Using Local Vibrational Information. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2001, n. 690 (November 2001).
- (2004): Design Of A Tunnel Lining Versus Pressure Fluctuation In High-speed Train Tunnel. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2004, n. 752 (Januar 2004).
- (2004): Development of a New Method to Reduce Shinkansen-Induced Wayside Vibrations Applicable to Rigid Frame Bridges. Bridge-end Reinforcing Method. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2004, n. 766 (Juli 2004).
- (2008): Dynamic analysis of guideway structures by considering ultra high-speed Maglev train-guideway interaction. In: Structural Engineering and Mechanics, v. 29, n. 4 (Juli 2008).
- (2013): Dynamic Characteristics of an Overpass Bridge in a Full-Scale Destructive Test. In: Journal of Engineering Mechanics (ASCE), v. 139, n. 6 (Juni 2013).
- (2003): Control of Wind-Induced Self-Excited Oscillations by Transfer of Internal Energy to Higher Modes of Vibration. I: Analysis in Two Degrees of Freedom. In: Journal of Engineering Mechanics (ASCE), v. 129, n. 5 (Mai 2003).
- (2003): Control of Wind-Induced Self-Excited Oscillations by Transfer of Internal Energy to Higher Modes of Vibration. II: Application to Taut Cables. In: Journal of Engineering Mechanics (ASCE), v. 129, n. 5 (Mai 2003).
- (2002): Development of Web-based Support System for Bridge Visual Inspection. Vorgetragen bei: IABSE Symposium: Towards a Better Built Environment - Innovation, Sustainability, Information Technology, Melbourne, Australia, 11-13 September 2002.
- (2013): Design of Steel Cable-stayed Bridge with Low Height Towers. Vorgetragen bei: IABSE Symposium: Long Span Bridges and Roofs - Development, Design and Implementation, Kolkata, India, 24-27 September 2013.
- (2014): Damage Detection of RC Columns in Shaking Table Tests by Singularity Analysis of Their Acceleration Responses. Vorgetragen bei: IABSE Symposium: Engineering for Progress, Nature and People, Madrid, Spain, 3-5 September 2014.
- (1993): Design formulas for tuned mass dampers based on A perturbation technique. In: Earthquake Engineering and Structural Dynamics, v. 22, n. 10 (Oktober 1993).
- (2014): Development and validation of nonlinear computational models of dispersed structures under strong earthquake excitation. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 7 (Mai 2014).
- (2007): Distributed object-based software environment for urban system integrated simulation under urban-scale hazard—Part II: Application. In: Earthquake Engineering and Structural Dynamics, v. 36, n. 11 (September 2007).
- (2007): Distributed object-based software environment for urban system integrated simulation under urban-scale hazard—Part I: Infrastructure. In: Earthquake Engineering and Structural Dynamics, v. 36, n. 11 (September 2007).
- (2005): Development of non-contact scanning vibration measurement system for real-scale structures. In: Structure and Infrastructure Engineering, v. 1, n. 3 (September 2005).
- (2007): Dynamic characteristics of a curved cable-stayed bridge identified from strong motion records. In: Engineering Structures, v. 29, n. 8 (August 2007).
- (2005): Damage Analysis of Hanshin Expressway Viaducts during 1995 Kobe Earthquake. II: Damage Mode of Single Reinforced Concrete Piers. In: Journal of Bridge Engineering (ASCE), v. 10, n. 1 (Januar 2005).
- (2005): Damage Analysis of Hanshin Expressway Viaducts during 1995 Kobe Earthquake. I: Residual Inclination of Reinforced Concrete Piers. In: Journal of Bridge Engineering (ASCE), v. 10, n. 1 (Januar 2005).
- (2005): Damage Analysis of Hanshin Expressway Viaducts during 1995 Kobe Earthquake. III: Three-Span Continuous Girder Bridges. In: Journal of Bridge Engineering (ASCE), v. 10, n. 1 (Januar 2005).
- (2008): Design Formulas for Damping of a Stay Cable with a Damper. In: Journal of Structural Engineering (ASCE), v. 134, n. 2 (Februar 2008).
- (1998): Coupled flutter behaviour of ultra long-span suspension bridges. Vorgetragen bei: IABSE Symposium: Long-Span and High-Rise Structures, Kobe, Japan, September 1998.
- (1994): Damping of cables in cable-stayed bridges with and without vibration-control measures. Vorgetragen bei: International Conference IABSE-FIP: Ponts suspendus et à haubans = Cable-stayed and suspension bridges, Deauville, France, 12-15 October 1994.
- (1994): Development of box cross-sections of girders in extremely long-span cable-stayed bridges. Vorgetragen bei: International Conference IABSE-FIP: Ponts suspendus et à haubans = Cable-stayed and suspension bridges, Deauville, France, 12-15 October 1994.
Structurae kooperiert mit
