-
Yu, Liang / Frank, Karl H. (2009): Experimental Study of Bolted Connection Strength at Elevated Temperatures. In: Engineering Journal, v. 46, n. 3 (September 2009).
https://doi.org/10.62913/engj.v46i3.958
-
Yu, Liang / Frank, Karl H. (2009): Shear Behavior of A325 and A490 High-Strength Bolts in Fire and Post-Fire. In: Engineering Journal, v. 46, n. 2 (Juni 2009).
https://doi.org/10.62913/engj.v46i2.1226
-
Frank, Karl H. / Samaras, Vasilis / Helwig, Todd A. (2012): The Effect of Piece Marking Upon Fatigue Performance of Bridge Steel. In: Engineering Journal, v. 49, n. 2 (Juni 2012).
https://doi.org/10.62913/engj.v49i2.1023
-
Sheikh-Ibrahim, Firas I. / Frank, Karl H. (1998): The Ultimate Strength of Symmetric Beam Bolted Splices. In: Engineering Journal, v. 35, n. 3 (September 1998).
https://doi.org/10.62913/engj.v35i3.702
-
Frank, Karl H. / Polyzois, D. (1986): Effect of Overspray and Incomplete Masking of Faying Surfaces on the Slip Resistance of Bolted Connections. In: Engineering Journal, v. 23, n. 2 (Juni 1986).
https://doi.org/10.62913/engj.v23i2.462
-
Yura, Joseph A. / Frank, Karl H. (1985): Testing Method to Determine Slip Coefficient for Coatings Used in Bolted Joints. In: Engineering Journal, v. 22, n. 3 (September 1985).
https://doi.org/10.62913/engj.v22i3.445
-
Frank, Karl H. / Yura, Joseph A. / Fouad, Fouad H. (1984): Bolted Shear Connections with Painted Surfaces. In: Engineering Journal, v. 21, n. 3 (September 1984).
https://doi.org/10.62913/engj.v21i3.420
-
Frank, Karl H. / Helwig, Todd A. (1995): Buckling of Webs in Unsymmetric Plate Girders. In: Engineering Journal, v. 32, n. 2 (Juni 1995).
https://doi.org/10.62913/engj.v32i2.643
-
Chung, Hsin-Yang / Manuel, Lance / Frank, Karl H. (2003): Reliability-Based Optimal Inspection for Fracture-Critical Steel Bridge Members. In: Transportation Research Record: Journal of the Transportation Research Board, v. 1845, n. 1 (Januar 2003).
https://doi.org/10.3141/1845-05
-
Reichenbach, Matthew C. / Battistini, Anthony D. / Donahue, Sean / Helwig, Todd A. / Engelhardt, Michael D. / Frank, Karl H. (2023): Experimental Fatigue Evaluation of Typical Cross-Frame Details in Steel I-Girder Bridges. In: Journal of Bridge Engineering (ASCE), v. 28, n. 12 (Dezember 2023).
https://doi.org/10.1061/jbenf2.beeng-6402
-
Frank, Karl H. / Fisher, John W. (1979): Fatigue Strength of Fillet Welded Cruciform Joints. In: Journal of the Structural Division (ASCE), v. 105, n. 9 (September 1979).
https://doi.org/10.1061/jsdeag.0005226
-
Frank, Karl H. (1980): Fatigue Strength of Anchor Bolts. In: Journal of the Structural Division (ASCE), v. 106, n. 6 (Juni 1980).
https://doi.org/10.1061/jsdeag.0005448
-
Yura, Joseph A. / Cayes, Lloyd / Frank, Karl H. (1981): Bolted Friction Connections with Weathering Steel. In: Journal of the Structural Division (ASCE), v. 107, n. 11 (November 1981).
https://doi.org/10.1061/jsdeag.0005809
-
Yura, Joseph A. / Hansen, Mikkel A. / Frank, Karl H. (1982): Bolted Splice Connections with Undeveloped Fillers. In: Journal of the Structural Division (ASCE), v. 108, n. 12 (Dezember 1982).
https://doi.org/10.1061/jsdeag.0006108
-
Frank, Karl H. / Kohutek, Terry L. (1982): Application of photon tomography to weld inspection. Vorgetragen bei: IABSE Colloqium: Fatigue of Steel and Concrete Structures = Fatigue des structures en acier et béton = Ermüdungsverhalten von Stahl- und Betonbauten, Lausanne, Switzerland, 1982.
https://doi.org/10.5169/seals-28935
-
Topkaya, Cem / Williamson, Eric B. / Frank, Karl H. (2004): Behavior of curved steel trapezoidal box-girders during construction. In: Engineering Structures, v. 26, n. 6 (Mai 2004).
https://doi.org/10.1016/j.engstruct.2003.12.012
-
Fasl, Jeremiah D. / Stith, Jason C. / Helwig, Todd A. / Schuh, Andrew / Farris, Jamie / Engelhardt, Michael D. / Williamson, Eric B. / Frank, Karl H. (2015): Instrumentation of a Horizontally Curved Steel I-Girder Bridge during Construction. In: Journal of Structural Engineering (ASCE), v. 141, n. 1 (Januar 2015).
https://doi.org/10.1061/(asce)st.1943-541x.0001110
-
Helwig, Todd A. / Frank, Karl H. (1999): Stiffness Requirements for Diaphragm Bracing of Beams. In: Journal of Structural Engineering (ASCE), v. 125, n. 11 (November 1999).
https://doi.org/10.1061/(asce)0733-9445(1999)125:11(1249)
-
Zweraeman, Farrel J. / Frank, Karl H. (1988): Fatigue Damage under Variable Amplitude Loads. In: Journal of Structural Engineering (ASCE), v. 114, n. 1 (Januar 1988).
https://doi.org/10.1061/(asce)0733-9445(1988)114:1(67)
-
Battistini, Anthony D. / Wang, Weihua / Helwig, Todd A. / Engelhardt, Mike D. / Frank, Karl H. (2016): Stiffness Behavior of Cross Frames in Steel Bridge Systems. In: Journal of Bridge Engineering (ASCE), v. 21, n. 6 (Juni 2016).
https://doi.org/10.1061/(asce)be.1943-5592.0000883
-
Sutton, James P. / Mouras, Joshua M. / Samaras, Vasileios A. / Williamson, Eric B. / Frank, Karl H. (2014): Strength and Ductility of Shear Studs under Tensile Loading. In: Journal of Bridge Engineering (ASCE), v. 19, n. 2 (Februar 2014).
https://doi.org/10.1061/(asce)be.1943-5592.0000516
-
Jáuregui, David V. / Yura, Joseph A. / Frank, Karl H. / Wood, Sharon L. (2002): Field Evaluation of Decommissioned Noncomposite Steel Girder Bridge. In: Journal of Bridge Engineering (ASCE), v. 7, n. 1 (Januar 2002).
https://doi.org/10.1061/(asce)1084-0702(2002)7:1(39)
-
Samaras, Vasileios A. / Sutton, James P. / Williamson, Eric B. / Frank, Karl H. (2012): Simplified Method for Evaluating the Redundancy of Twin Steel Box-Girder Bridges. In: Journal of Bridge Engineering (ASCE), v. 17, n. 3 (Mai 2012).
https://doi.org/10.1061/(asce)be.1943-5592.0000280
-
Wood, Sharon L. / Frank, Karl H. (2010): Experimental Investigation of Bending Fatigue Response of Grouted Stay Cables. In: Journal of Bridge Engineering (ASCE), v. 15, n. 2 (März 2010).
https://doi.org/10.1061/(asce)be.1943-5592.0000045
-
Chung, Hsin-Yang / Manuel, Lance / Frank, Karl H. (2006): Optimal Inspection Scheduling of Steel Bridges Using Nondestructive Testing Techniques. In: Journal of Bridge Engineering (ASCE), v. 11, n. 3 (Mai 2006).
https://doi.org/10.1061/(asce)1084-0702(2006)11:3(305)
-
Helwig, Todd A. / Frank, Karl H. / Yura, Joseph A. (1997): Lateral-Torsional Buckling of Singly Symmetric I-Beams. In: Journal of Structural Engineering (ASCE), v. 123, n. 9 (September 1997).
https://doi.org/10.1061/(asce)0733-9445(1997)123:9(1172)
-
Stith, Jason C. / Helwig, Todd A. / Williamson, Eric B. / Frank, Karl H. / Engelhardt, Michael D. / Schuh, Andrew C. / Farris, Jamie F. (2012): Comparisons of the Computed and Measured Behavior of Curved Steel I-Girders during Lifting. In: Journal of Structural Engineering (ASCE), v. 138, n. 1 (Januar 2012).
https://doi.org/10.1061/(asce)st.1943-541x.0000417
-
Stith, Jason C. / Helwig, Todd A. / Williamson, Eric B. / Frank, Karl H. / Engelhardt, Michael D. / Schuh, Andrew C. / Farris, Jamie F. / Petruzzi, Brian J. (2013): Behavior of Horizontally Curved I-Girders during Lifting. In: Journal of Structural Engineering (ASCE), v. 139, n. 4 (April 2013).
https://doi.org/10.1061/(asce)st.1943-541x.0000674
-
Stallings, James M. / Frank, Karl H. (1991): Stay‐Cable Fatigue Behavior. In: Journal of Structural Engineering (ASCE), v. 117, n. 3 (März 1991).
https://doi.org/10.1061/(asce)0733-9445(1991)117:3(936)
-
Poston, Randall W. / Frank, Karl H. / West, Jeffrey S. (2003): Enduring Strength. In: Civil Engineering Magazine, v. 73, n. 9 (September 2003).