Liang Fan 
- (2024): Corrosion behavior of modified cement-based coated steel rebar subjected to different levels of tensile loads. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Passivation of cold-sprayed zinc-coated steel bars in simulated concrete pore solution. In: Journal of Building Engineering, v. 89 (Juli 2024).
- (2023): EVA enhanced cementitious materials based coatings for the improvement of steel reinforcement corrosion protection performance. In: Journal of Building Engineering, v. 75 (September 2023).
- (2024): Beetroot Juice Additive in Chloride Brines Reduces Damage of Concrete Exposed to Freeze–Thaw Cycles. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 2 (Februar 2024).
- (2023): Study on bond properties of corroded NPR (negative Poisson’s ratio) steel bar embedded in marine concrete. In: Structures, v. 57 (November 2023).
- (2024): Molecular Dynamics Simulation and Durability Experiment on Functional GO-Modified Cementitious Composites. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (Januar 2024).
- (2023): Effect of carbonation curing on distribution and binding capacity of chloride ions in cement pastes. In: Journal of Building Engineering, v. 71 (Juli 2023).
- (2023): Chloride binding of monosulfate hydrate (AFm) and its effect on steel corrosion in simulated concrete pore solution. In: Journal of Building Engineering, v. 67 (Mai 2023).
- (2023): Application of microbial mineralization technology for marine concrete crack repair: A review. In: Journal of Building Engineering, v. 69 (Juni 2023).
- (2023): Monitoring and quantification of non-uniform corrosion induced mass loss of steel piles with distributed optical fiber sensors. In: Automation in Construction, v. 148 (April 2023).
- (2023): Hyperspectral reflectance for determination of steel rebar corrosion and Cl− concentration. In: Construction and Building Materials, v. 368 (März 2023).
- (2021): Corrosion of steel rebar embedded in UHPC beams with cracked matrix. In: Construction and Building Materials, v. 313 (Dezember 2021).
- (2022): Study on the bond behavior of steel bars embedded in concrete under the long-term coupling of repeated loads and chloride ion erosion. In: Construction and Building Materials, v. 323 (März 2022).
- (2022): Effect of montmorillonite modification on resistance to thermal oxidation aging of asphalt binder. In: Case Studies in Construction Materials, v. 16 (Juni 2022).
- (2021): Detection, visualization, quantification, and warning of pipe corrosion using distributed fiber optic sensors. In: Automation in Construction, v. 132 (Dezember 2021).
- (2022): Techniques of corrosion monitoring of steel rebar in reinforced concrete structures: A review. In: Structural Health Monitoring, v. 21, n. 4 (Januar 2022).
- (2021): Shear-slip behaviour of prefabricated composite shear stud connectors in composite bridges. In: Engineering Structures, v. 240 (August 2021).
- (2019): Experimental investigation of perfobond hoop shear connector’s bearing capacity and slip. In: Engineering Structures, v. 198 (November 2019).
- (2021): Properties and modification mechanism of asphalt with graphene as modifier. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2020): Temperature Distribution and Mechanical Response of Orthotropic Steel Bridge Deck During Paving of Gussasphalt Pavement. In: International Journal of Steel Structures, v. 21, n. 1 (Oktober 2020).
- (2013): Research into the Concrete Freeze-Thaw Damage Mechanism Based on the Principle of Thermodynamics. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Hyperspectral imaging features for mortar classification and compressive strength assessment. In: Construction and Building Materials, v. 251 (August 2020).
- (2020): Fatigue damage of PBH shear connector of steel-concrete composite structure. In: Engineering Structures, v. 213 (Juni 2020).
- (2020): Flexural responses of steel-UHPC composite beams under hogging moment. In: Engineering Structures, v. 206 (März 2020).
- (2020): Monitoring corrosion of steel bars in reinforced concrete based on helix strains measured from a distributed fiber optic sensor. In: Engineering Structures, v. 204 (Februar 2020).
- (2020): Effects of lightweight sand and steel fiber contents on the corrosion performance of steel rebar embedded in UHPC. In: Construction and Building Materials, v. 238 (März 2020).
- (2019): Field Application of Magnet-Based Smart Rock for Bridge Scour Monitoring. In: Journal of Bridge Engineering (ASCE), v. 24, n. 4 (April 2019).
- (2013): Chongqing Wansheng Zaodu Bridge—Steel Box–Concrete Composite Arch Bridge. In: Structural Engineering International, v. 23, n. 1 (Februar 2013).
- (2014): New Shear Connectors Based on PBL Shear Connector For Composite Arch Members. In: Structural Engineering International, v. 24, n. 2 (Mai 2014).
- (2010): Experimental Study on the Behavior of Steel-Concrete Composite Arch Ribs to Combined Bending and Compression. Vorgetragen bei: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
Structurae kooperiert mit
