Anjan Dutta 
- (2023): Rehabilitation of Severely Damaged RC Bridge Piers: Experimental and Numerical Investigation. In: Journal of Earthquake Engineering, v. 28, n. 7 (November 2023).
- (2023): Axial Stress–Strain Model for Concrete Actively Confined with Fe-SMA Strips. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (Dezember 2023).
- (2023): Calibration of finite element model of bridge with pier retrofitted using Fe-SMA strips. In: Bulletin of Earthquake Engineering, v. 22, n. 2 (November 2023).
- (2023): Hybrid Simulation for Evaluation of Seismic Performance of Highway Bridge with Pier Retrofitted Using Fe-SMA Strips. In: Journal of Bridge Engineering (ASCE), v. 28, n. 8 (August 2023).
- (2022): Comparison of the performance of nonlinear Kalman filter based algorithms for state‐parameter identification of base isolated structures. In: Structural Control and Health Monitoring, v. 29, n. 10 (13 September 2022).
- (2007): Dynamic Analysis of Horizontally Curved Thin-Walled Box-Girder Bridge due to Moving Vehicle. In: Shock and Vibration, v. 14, n. 3 ( 2007).
- (2008): Health monitoring of multistoreyed shear building using parametric state space modeling. In: Smart Structures and Systems, v. 4, n. 1 (Januar 2008).
- (2021): Evaluation of participation of masonry infill walls in the linear and nonlinear behaviour of RC buildings with open ground storey. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2007): Optimal assessment and location of tuned mass dampers for seismic response control of a plan-asymmetrical building. In: Structural Engineering and Mechanics, v. 26, n. 4 (Juli 2007).
- (2008): Fatigue life prediction of horizontally curved thin walled box girder steel bridges. In: Structural Engineering and Mechanics, v. 28, n. 4 (März 2008).
- (2016): Experimental fragility functions for exterior deficient RC beam-column connections before and after rehabilitation. In: Earthquakes and Structures, v. 10, n. 6 (Juni 2016).
- (2013): Base isolated RC building - performance evaluation and numerical model updating using recorded earthquake response. In: Earthquakes and Structures, v. 4, n. 5 (Mai 2013).
- (2019): Hybrid testing for evaluation of seismic performance of highway bridge with pier made of HyFRC. In: Structures, v. 20 (August 2019).
- (2009): Influence of Structural Modeling on Seismic Vulnerability Assessment of a RC Viaduct using Fragility Curves. Vorgetragen bei: IABSE Symposium: Sustainable Infrastructure - Environment Friendly, Safe and Resource Efficient, Bangkok, Thailand, 9-11 September 2009.
- (2016): Effect of Cyclic Loading Frequency on the Behavior of External RC Beam-Column Connections. In: Journal of Earthquake Engineering, v. 20, n. 7 ( 2016).
- (2012): Seismic Rehabilitation of RC Exterior Beam-Column Connections Using Epoxy Resin Injection. In: Journal of Earthquake Engineering, v. 17, n. 3 ( 2012).
- (2016): Comparison of Numerical and Experimental Seismic Responses of FREI-Supported Un-reinforced Brick Masonry Model Building. In: Journal of Earthquake Engineering, v. 20, n. 8 ( 2016).
- (2002): Adaptive finite element analysis of structures subjected to transient dynamic loads using time marching scheme. In: Computers & Structures, v. 80, n. 27-30 (November 2002).
- (2015): Ductility Enhancement in Beam-Column Connections Using Hybrid Fiber-Reinforced Concrete. In: ACI Structural Journal, v. 112, n. 2 (März 2015).
- (2015): Performance of fiber-reinforced elastomeric base isolators under cyclic excitation. In: Structural Control and Health Monitoring, v. 22, n. 2 (Februar 2015).
- (2011): System identification of multistoreyed non-standard shear building using parametric state space modeling. In: Structural Control and Health Monitoring, v. 18, n. 4 (Juni 2011).
- (2018): Effect of horizontal loading direction on performance of prototype square unbonded fibre reinforced elastomeric isolator. In: Structural Control and Health Monitoring, v. 25, n. 3 (März 2018).
- (2017): Evaluation of horizontal stiffness of fibre-reinforced elastomeric isolators. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 11 (September 2017).
- (2016): Shake table testing of un-reinforced brick masonry building test model isolated by U-FREI. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 2 (Februar 2016).
- (2015): Bayesian probabilistic approach for model updating and damage detection for a large truss bridge. In: International Journal of Steel Structures, v. 15, n. 2 ( 2015).
- (2018): HyFRC Bridge Piers with Different Detailing at Pier–Foundation Interface. In: Journal of Bridge Engineering (ASCE), v. 23, n. 6 (Juni 2018).
- (2008): Design of an active controller for Quincy Bayview Bridge, Illinois, U.S.A., against seismic excitation-Part I: Model updating. In: Structural Control and Health Monitoring, v. 15, n. 8 (Dezember 2008).
- (2008): Design of an active controller for Quincy Bayview Bridge, Illinois, U.S.A. against seismic excitation-Part II: Control implementation. In: Structural Control and Health Monitoring, v. 15, n. 8 (Dezember 2008).
- (2006): Coupled tuned mass dampers for control of coupled vibrations in asymmetric buildings. In: Structural Control and Health Monitoring, v. 13, n. 5 (September 2006).
Structurae kooperiert mit
