0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Robert G. Driver ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Deng, Kam / Grondin, Gilbert Y. / Driver, Robert G. (2006): Effect of Loading Angle on the Behavior of Fillet Welds. In: Engineering Journal, v. 43, n. 1 (März 2006).

    https://doi.org/10.62913/engj.v43i1.870

  2. Callele, Logan J. / Driver, Robert G. / Grondin, Gilbert Y. (2009): Design and Behavior of Multi-Orientation Fillet Weld Connections. In: Engineering Journal, v. 46, n. 4 (Dezember 2009).

    https://doi.org/10.62913/engj.v46i4.965

  3. Wong, Edgar / Driver, Robert G. (2010): Critical Evaluation of Equivalent Moment Factor Procedures for Laterally Unsupported Beams. In: Engineering Journal, v. 47, n. 1 (März 2010).

    https://doi.org/10.62913/engj.v47i1.975

  4. Ng, Anthony K. F. / Driver, Robert G. / Grondin, Gilbert Y. (2004): Behavior of Transverse Fillet Welds: Parametric and Reliability Analyses. In: Engineering Journal, v. 41, n. 2 (Juni 2004).

    https://doi.org/10.62913/engj.v41i2.827

  5. Ng, Anthony K. F. / Deng, Kam / Grondin, Gilbert Y. / Driver, Robert G. (2004): Behavior of Transverse Fillet Welds: Experimental Program. In: Engineering Journal, v. 41, n. 2 (Juni 2004).

    https://doi.org/10.62913/engj.v41i2.828

  6. Zain, Akram / Imanpour, Ali / Driver, Robert G. (2022): Achieving Improved Construction Efficiency for Multi-Story Steel Concentrically Braced Frames. In: International Journal of Steel Structures, v. 22, n. 2 (25 März 2022).

    https://doi.org/10.1007/s13296-022-00585-3

  7. Unsworth, Daniel / Driver, Robert G. / Li, Leijun / Twizell, Sheldon / Imanpour, Ali (2021): Characterization of residual stresses for LTB simulations of modern welded girders. In: Journal of Constructional Steel Research, v. 183 (August 2021).

    https://doi.org/10.1016/j.jcsr.2021.106769

  8. Bhowmick, Anjan K. / Grondin, Gilbert Y. / Driver, Robert G. (2011): Estimating fundamental periods of steel plate shear walls. In: Engineering Structures, v. 33, n. 6 (Juni 2011).

    https://doi.org/10.1016/j.engstruct.2011.02.010

  9. Daneshvar, Hossein / Oosterhof, Steven / Driver, Robert G. (2020): Arching followed by catenary response of steel shear connections in disproportionate collapse. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 47, n. 8 (August 2020).

    https://doi.org/10.1139/cjce-2018-0645

  10. Abbas, Hassan H. / Sause, Richard / Driver, Robert G. (2006): Behavior of Corrugated Web I-Girders under In-Plane Loads. In: Journal of Engineering Mechanics (ASCE), v. 132, n. 8 (August 2006).

    https://doi.org/10.1061/(asce)0733-9399(2006)132:8(806)

  11. Moghimi, Hassan / Driver, Robert G. (2011): Effect of Regular Perforation Patterns on Steel Plate Shear Wall Column Demands. Vorgetragen bei: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.

    https://doi.org/10.1061/41171(401)253

  12. Koch, James C. / Driver, Robert G. / Li, Yong / Manarin, Michael (2019): Evaluation of CSA S16-14 asymmetry parameter for singly-symmetric beams. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 46, n. 3 (März 2019).

    https://doi.org/10.1139/cjce-2018-0223

  13. Chen, Huating / Grondin, Gilbert Y. / Driver, Robert G. (2007): Characterization of fatigue properties of ASTM A709 high performance steel. In: Journal of Constructional Steel Research, v. 63, n. 6 (Juni 2007).

    https://doi.org/10.1016/j.jcsr.2006.08.002

  14. Oosterhof, Steven A. / Driver, Robert G. (2011): Effects of connection geometry on block shear failure of welded lap plate connections. In: Journal of Constructional Steel Research, v. 67, n. 3 (März 2011).

    https://doi.org/10.1016/j.jcsr.2010.09.003

  15. Moghimi, Hassan / Driver, Robert G. (2014): Column demands in steel plate shear walls with regular perforations using performance-based design methods. In: Journal of Constructional Steel Research, v. 103 (Dezember 2014).

    https://doi.org/10.1016/j.jcsr.2014.07.020

  16. Daneshvar, Hossein / Driver, Robert G. (2017): Behaviour of shear tab connections in column removal scenario. In: Journal of Constructional Steel Research, v. 138 (November 2017).

    https://doi.org/10.1016/j.jcsr.2017.08.010

  17. Ahmad, Muhammad / Driver, Robert G. / Callele, Logan / Dowswell, Bo (2018): Design of steel wide-flange members for torsion applied through one flange. In: Journal of Constructional Steel Research, v. 141 (Februar 2018).

    https://doi.org/10.1016/j.jcsr.2017.10.024

  18. Oosterhof, Steven A. / Nethercot, David A. / Driver, Robert G. (2017): Column Removal Analysis of Bare Steel Gravity Frames Using Connection Behaviour from Physical Tests. Vorgetragen bei: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.

    https://doi.org/10.2749/vancouver.2017.1344

  19. Begum, Mahbuba / Driver, Robert G. / Elwi, Alaa E. (2013): Behaviour of partially encased composite columns with high strength concrete. In: Engineering Structures, v. 56 (November 2013).

    https://doi.org/10.1016/j.engstruct.2013.07.040

  20. Oosterhof, Steven A. / Driver, Robert G. (2015): Behavior of Steel Shear Connections under Column-Removal Demands. In: Journal of Structural Engineering (ASCE), v. 141, n. 4 (April 2015).

    https://doi.org/10.1061/(asce)st.1943-541x.0001073

  21. Driver, Robert G. / Kulak, Geoffrey L. / Kennedy, D. J. Laurie / Elwi, Alaa E. (1998): Cyclic Test of Four-Story Steel Plate Shear Wall. In: Journal of Structural Engineering (ASCE), v. 124, n. 2 (Februar 1998).

    https://doi.org/10.1061/(asce)0733-9445(1998)124:2(112)

  22. Moghimi, Hassan / Driver, Robert G. (2014): Beam Design Force Demands in Steel Plate Shear Walls with Simple Boundary Frame Connections. In: Journal of Structural Engineering (ASCE), v. 140, n. 7 (Juli 2014).

    https://doi.org/10.1061/(asce)st.1943-541x.0000993

  23. Driver, Robert G. / Kennedy, D. J. Laurie (1989): Combined flexure and torsion of I-shaped steel beams. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 16, n. 2 (April 1989).

    https://doi.org/10.1139/l89-028

  24. Franchuk, Cameron R. / Driver, Robert G. / Grondin, Gilbert Y. (2003): Experimental investigation of block shear failure in coped steel beams. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 30, n. 5 (Oktober 2003).

    https://doi.org/10.1139/l03-044

  25. Moghimi, Hassan / Driver, Robert G. (2013): Economical Steel Plate Shear Walls for Low-Seismic Regions. In: Journal of Structural Engineering (ASCE), v. 139, n. 3 (März 2013).

    https://doi.org/10.1061/(asce)st.1943-541x.0000662

  26. Bhowmick, Anjan K. / Driver, Robert G. / Grondin, Gilbert Y. (2011): Application of Indirect Capacity Design Principles for Seismic Design of Steel-Plate Shear Walls. In: Journal of Structural Engineering (ASCE), v. 137, n. 4 (April 2011).

    https://doi.org/10.1061/(asce)st.1943-541x.0000303

  27. Sause, Richard / Abbas, Hassan H. / Driver, Robert G. / Anami, Kengo / Fisher, John W. (2006): Fatigue Life of Girders with Trapezoidal Corrugated Webs. In: Journal of Structural Engineering (ASCE), v. 132, n. 7 (Juli 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:7(1070)

  28. Shishkin, Jonah J. / Driver, Robert G. / Grondin, Gilbert Y. (2009): Analysis of Steel Plate Shear Walls Using the Modified Strip Model. In: Journal of Structural Engineering (ASCE), v. 135, n. 11 (November 2009).

    https://doi.org/10.1061/(asce)st.1943-541x.0000066

  29. Daneshvar, Hossein / Driver, Robert G. (2018): Behaviour of Single Angle Connections Under Simultaneous Shear, Tension and Moment. In: Structures, v. 15 (August 2018).

    https://doi.org/10.1016/j.istruc.2018.05.005

  30. Abbas, Hassan H. / Sause, Richard / Driver, Robert G. (2007): Analysis of Flange Transverse Bending of Corrugated Web I-Girders under In-Plane Loads. In: Journal of Structural Engineering (ASCE), v. 133, n. 3 (März 2007).

    https://doi.org/10.1061/(asce)0733-9445(2007)133:3(347)

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine