Biqin Dong 
- (2024): Effect of electrodeposition potential on the growth mechanism and corrosion resistance of Zn/Al layered double hydroxide film on steel substrate via electrodeposition-hydrothermal method. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Design and characterization of solid waste based self-healing artificial aggregate. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Electrical conductive mortar based on expanded graphite for auxiliary anode. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Design and characterization of carbonate-stone-powder-based foam concrete. In: Construction and Building Materials, v. 418 (März 2024).
- (2024): Beam-hardening correction method for quantifying moisture content in cement paste based on X-ray radiography. In: Construction and Building Materials, v. 421 (März 2024).
- (2023): Corrosion resistance and mechanical properties of in-situ grown Mg/Al layered double hydroxide coatings on reinforcing steel. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Effects of tannic acid on the late-age strength of autoclave curing cement paste. In: Construction and Building Materials, v. 390 (August 2023).
- (2022): Effects of fly ash on MgO-based shrinkage-compensating cement: Microstructure and properties. In: Construction and Building Materials, v. 339 (Juli 2022).
- (2021): Alkali-activated artificial aggregates fabricated by red mud and fly ash: Performance and microstructure. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): 3D model-based scan planning for space frame structures considering site conditions. In: Automation in Construction, v. 140 (August 2022).
- (2022): A deep learning-based indoor acceptance system for assessment on flatness and verticality quality of concrete surfaces. In: Journal of Building Engineering, v. 51 (Juli 2022).
- (2022): Assessment of compositional changes of carbonated cement pastes subjected to high temperatures using in-situ Raman mapping and XPS. In: Journal of Building Engineering, v. 45 (Januar 2022).
- (2021): Core-Shell structured ceramsite made by excavated soil and expanded perlite through cold-bonded technology. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): Cyclic behavior of circular TSRC column to steel beam frames. In: Journal of Constructional Steel Research, v. 184 (September 2021).
- (2020): Changes in chemical phases and microscopic characteristics of fly ash blended cement pastes in different CO2 concentrations. In: Construction and Building Materials, v. 257 (Oktober 2020).
- (2021): Compositions and microstructures of hardened cement paste with carbonation curing and further water curing. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2021): Action of the combined presence of C-S-Hs-PCE and triethanolamine on the performances of cement paste/mortar. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2020): Chlorine immobilization and performances of cement paste/mortar with C-S-Hs-PCE and calcium chloride. In: Construction and Building Materials, v. 262 (November 2020).
- (2021): Effect of C-S-Hs-PCE and sodium sulfate on the hydration kinetics and mechanical properties of cement paste. In: Construction and Building Materials, v. 266 (Januar 2021).
- (2020): Cement paste with well-dispersed multi-walled carbon nanotubes: Mechanism and performance. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Effect of Lamellar Inorganic Fillers on the Properties of Epoxy Emulsion Cement Mortar. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 Januar 2020).
- (2020): Determining influence of impressed current density on current efficiency with X-ray micro-computed tomography. In: Construction and Building Materials, v. 246 (Juni 2020).
- (2020): Differences between their influences of TEA and TEA·HCl on the properties of cement paste. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): 3D visualized tracing of rebar corrosion-inhibiting features in concrete with a novel chemical self-healing system. In: Construction and Building Materials, v. 168 (April 2018).
- (2015): Corrosion Monitoring Using Embedded Piezoelectric Sensors. In: The Open Civil Engineering Journal, v. 8, n. 1 (Juni 2015).
- (2016): Characterization and evaluation of the surface free energy for cementitious materials. In: Construction and Building Materials, v. 110 (Mai 2016).
- (2017): Characterizing the generation and flows of construction and demolition waste in China. In: Construction and Building Materials, v. 136 (April 2017).
- (2017): Effect of surface modification of colloidal particles in polymer latexes on cement hydration. In: Construction and Building Materials, v. 155 (November 2017).
- (2013): Corrosion monitoring of reinforced concrete beam using embedded cement-based piezoelectric sensor. In: Magazine of Concrete Research, v. 65, n. 21 (November 2013).
- (2018): Effect of carbon fiber and nanosilica on shear properties of silty soil and the mechanisms. In: Construction and Building Materials, v. 189 (November 2018).
Structurae kooperiert mit
