Mingke Deng
- : Experimental cyclic testing of masonry pier-spandrel substructures reinforced with engineered cementitious composites overlay. In: Bulletin of Earthquake Engineering.
- (2024): Bond performance of carbon textile reinforced mortar with short fibers for strengthening concrete elements. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Bond Behavior and Failure Mechanisms of the Interface between Engineered Cementitious Composites and Shaped Steel. In: Buildings, v. 14, n. 7 (2 Juli 2024).
- (2024): Bond behavior between highly ductile fiber-reinforced concrete (HDC) and deformed rebar under repeated and post-repeated monotonic loading. In: Structures, v. 67 (September 2024).
- (2024): Experimental study and theoretical analysis on steel frames infilled high-ductility concrete shear walls. In: Construction and Building Materials, v. 434 (Juli 2024).
- (2024): Autoclaved aerated concrete masonry wallettes strengthened using TRC overlay under out-of-plane load. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2024): Effects of textile type on the flexural properties of prefabricated hollow-core slabs strengthened with PVA fibers-improved TRM. In: Journal of Building Engineering, v. 87 (Juni 2024).
- (2023): Bond behavior of plain bar in highly ductile fiber-reinforced concrete (HDC) subjected to monotonic and repeated loading. In: Journal of Building Engineering, v. 72 (August 2023).
- (2024): Bond behavior between carbon fabric reinforced cementitious matrix (FRCM) composites with added short fibers and concrete substrates. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Effect of loading strain rate and short PVA fibers on the tensile mechanical performance of carbon TRM. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2023): Cyclic response of precast concrete columns connected with cast-in-place UHPC in plastic hinge region. In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Analytical solution of the bond strength between ribbed steel bar and engineered cementitious composites considering the fiber bridging effect. In: Structural Concrete, v. 24, n. 1 (Februar 2023).
- (2022): Application of engineered cementitious composites in the plastic hinge of reinforced concrete beams for seismic enhancing. In: Structural Concrete, v. 23, n. 5 (Oktober 2022).
- (2022): Effect of splitting bond on shear response of reinforced engineered cementitious composite short columns under cyclic loading. In: Engineering Structures, v. 251 (Januar 2022).
- (2021): Bond behavior of plain round bar embedded in high ductile concrete under monotonic and cyclic loading. In: Structural Concrete, v. 22, n. 6 (Dezember 2021).
- (2021): Diagonal compressive behavior of unreinforced masonry walls strengthened with textile reinforced mortar added with short PVA fibers. In: Engineering Structures, v. 246 (November 2021).
- (2021): Behavior of highly ductile fiber–reinforced concrete columns under eccentric loading. In: Structures, v. 33 (Oktober 2021).
- (2021): Deformation capacity of over-reinforced concrete beams strengthened with highly ductile fiber-reinforced concrete. In: Structures, v. 29 (Februar 2021).
- (2021): Effect of eccentricity on strengthening efficiency of bar mesh high ductile concrete (BMHDC) on slender masonry columns. In: Engineering Structures, v. 230 (März 2021).
- (2020): Axial behavior of engineered cementitious composites confined by circular steel tubes. In: Engineering Structures, v. 224 (Dezember 2020).
- (2020): Compressive performance of masonry columns confined with highly ductile fiber reinforced concrete (HDC). In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Experimental and numerical evaluation of confined masonry walls retrofitted with engineered cementitious composites. In: Engineering Structures, v. 207 (März 2020).
- (2020): Experimental investigation on tensile behavior of carbon textile reinforced mortar (TRM) added with short polyvinyl alcohol (PVA) fibers. In: Construction and Building Materials, v. 235 (Februar 2020).
- (2020): Effect of granulated blast furnace slag on the self-healing capability of mortar incorporating crystalline admixture. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Cyclic testing of unreinforced masonry walls retrofitted with engineered cementitious composites. In: Construction and Building Materials, v. 177 (Juli 2018).
- (2018): Bond behavior of steel bar embedded in Engineered Cementitious Composites under pullout load. In: Construction and Building Materials, v. 168 (April 2018).
- (2019): Cyclic loading tests of flexural-failure dominant URM walls strengthened with engineered cementitious composite. In: Engineering Structures, v. 194 (September 2019).
- (2017): Cyclic loading tests of RC columns strengthened with high ductile fiber reinforced concrete jacket. In: Construction and Building Materials, v. 153 (Oktober 2017).
- (2019): Bond behavior of deformed bar embedded in Engineered Cementitious Composites under cyclic loading. In: Construction and Building Materials, v. 197 (Februar 2019).
- (2016): The Cyclic behavior of shear walls with HPFRCCs in the inelastic deformation critical region. In: The Structural Design of Tall and Special Buildings, v. 25, n. 17 (10 Dezember 2016).
Structurae kooperiert mit
