Marta Del Zoppo 
- (2024): Seismic retrofitting of masonry infilled RC buildings in low-to moderate-seismic regions: case study of typical Sri Lankan school buildings. In: Bulletin of Earthquake Engineering, v. 22, n. 13 (23 September 2024).
- (2024): Recycling of wasted wool fibers from sheep shearing for green building components: A review. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- : An approach to seismic damage detection and evaluation in RC bridge piers through vibration data. In: Structure and Infrastructure Engineering.
- (2023): Repair, flexural upgrading and seismic retrofit of RC columns with reinforced FRCC light jacket. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2023): Damage Estimation of Full-Scale Infilled RC Frames under Pseudo-Dynamic Excitation by Means of Output-Only Modal Identification. In: Buildings, v. 13, n. 4 (24 März 2023).
- (2023): Correlation of local and global structural damage state for SHM. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Fibre reinforced mortars for the out-of-plane strengthening of masonry walls. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2022): A mechanics-based method towards risk assessment of RC buildings under tsunami and flow-type hazards. In: Engineering Structures, v. 264 (August 2022).
- (2021): Opportunities of light jacketing with Fibre Reinforced Cementitious Composites for seismic retrofitting of existing RC columns. In: Composite Structures, v. 263 (Mai 2021).
- (2021): Influence of exterior infill walls on the performance of RC frames under tsunami loads: Case study of school buildings in Sri Lanka. In: Engineering Structures, v. 234 (Mai 2021).
- (2017): Seismic assessment and finite element modelling of glazed curtain walls. In: Structural Engineering and Mechanics, v. 61, n. 1 (Januar 2017).
- (2021): Methodology for Assessing the Performance of RC Structures with Breakaway Infill Walls under Tsunami Inundation. In: Journal of Structural Engineering (ASCE), v. 147, n. 2 (Februar 2021).
- (2020): Diagonal compression testing of masonry panels with irregular texture strengthened with inorganic composites. In: Materials and Structures, v. 53, n. 4 (26 Juni 2020).
- (2020): Damage assessment of modern masonry buildings after the L’Aquila earthquake. In: Bulletin of Earthquake Engineering, v. 18, n. 5 (Januar 2020).
- (2019): Experimental In-Plane Shear Capacity of Clay Brick Masonry Panels Strengthened with FRCM and FRM Composites. In: Journal of Composites for Construction, v. 23, n. 5 (Oktober 2019).
- (2019): In-plane shear capacity of tuff masonry walls with traditional and innovative Composite Reinforced Mortars (CRM). In: Construction and Building Materials, v. 210 (Juni 2019).
- (2016): Deformation capacity of non-conforming r.c. columns under compressive axial load and biaxial bending. In: Engineering Structures, v. 124 (Oktober 2016).
- (2017): Comparison of available shear strength models for non-conforming reinforced concrete columns. In: Engineering Structures, v. 148 (Oktober 2017).
- (2017): Experimental Behavior of Nonconforming RC Columns with Deformed Bars under Constant Axial Load and Fixed Biaxial Bending. In: Journal of Structural Engineering (ASCE), v. 143, n. 11 (November 2017).
Structurae kooperiert mit
