Nele De Belie 
- (2024): Enhancing concrete durability in chloride-rich environments through manual application of healing agents. In: Journal of Building Engineering, v. 90 (August 2024).
- (2023): A holistic life cycle design approach to enhance the sustainability of concrete structures. In: Structural Concrete, v. 24, n. 6 (2 November 2023).
- (2023): How to improve the cradle-to-gate environmental and economic sustainability in lime-based construction materials? Answers from a real-life case-study. In: Developments in the Built Environment, v. 15 (Oktober 2023).
- (2016): Mechanical regains due to self-healing in cementitious materials: Experimental measurements and micro-mechanical model. In: Cement and Concrete Research, v. 80 (Februar 2016).
- (2009): Measuring the change in ultrasonic p-wave energy transmitted in fresh mortar with additives to monitor the setting. In: Cement and Concrete Research, v. 39, n. 10 (Oktober 2009).
- (2017): Improved model for capillary absorption in cementitious materials: Progress over the fourth root of time. In: Cement and Concrete Research, v. 100 (Oktober 2017).
- (2017): Impact of air entraining admixtures on biogenic calcium carbonate precipitation and bacterial viability. In: Cement and Concrete Research, v. 98 (August 2017).
- (2012): Investigation of the influence of blast-furnace slag on the resistance of concrete against organic acid or sulphate attack by means of accelerated degradation tests. In: Cement and Concrete Research, v. 42, n. 1 (Januar 2012).
- (2022): Influence of sustained compressive load on the carbonation of concrete containing blast furnace slag. In: Construction and Building Materials, v. 335 (Juni 2022).
- (2021): Enhanced durability performance of cracked and uncracked concrete by means of smart in-house developed superabsorbent polymers with alkali-stable and -unstable crosslinkers. In: Construction and Building Materials, v. 297 (August 2021).
- (2021): The influence of superabsorbent polymers (SAPs) on autogenous shrinkage in cement paste, mortar and concrete. In: Construction and Building Materials, v. 286 (Juni 2021).
- (2022): M&S Highlight: Hearn (1998), Self-sealing, autogenous healing and continued hydration—What is the difference?. In: Materials and Structures, v. 55, n. 2 (4 Februar 2022).
- (2021): Innovative SuperAbsorbent Polymers (iSAPs) to construct crack-free reinforced concrete walls: An in-field large-scale testing campaign. In: Journal of Building Engineering, v. 43 (November 2021).
- (2020): Insight into the secondary imbibition rate of concrete and its relationship with curing time. In: RILEM Technical Letters, v. 5 (Juni 2020).
- (2021): Mechanical and microstructural properties of recycled concretes mixed with ceramic recycled cement and secondary recycled aggregates. A viable option for future concrete. In: Construction and Building Materials, v. 270 (Februar 2021).
- (2020): The impact of slag fineness on the reactivity of blended cements with high-volume non-ferrous metallurgy slag. In: Construction and Building Materials, v. 257 (Oktober 2020).
- (2018): Experimental characterization of the self-healing capacity of cement based materials and its effects on the material performance: A state of the art report by COST Action SARCOS WG2. In: Construction and Building Materials, v. 167 (April 2018).
- (2019): Evaluation and comparison of traditional methods and Electron Probe Micro Analysis (EPMA) to determine the chloride ingress perpendicular to cracks in self-healing concrete. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2019): Feasibility study on real-scale, self-healing concrete slab by developing a smart capsules network and assessed by a plethora of advanced monitoring techniques. In: Construction and Building Materials, v. 228 (Dezember 2019).
- (2015): Feasibility Study of the Use of Concrete Sludge As Alternative Raw Material for Portland Clinker Production. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 10 (Oktober 2015).
- (2012): Influence of mix composition on the extent of autogenous crack healing by continued hydration or calcium carbonate formation. In: Construction and Building Materials, v. 37 (Dezember 2012).
- (2013): Fines extracted from porphyry and dolomitic limestone aggregates production: MgO as fluxing agent for a sustainable Portland clinker production. In: Construction and Building Materials, v. 43 (Juni 2013).
- (2013): Feasibility study on the use of cellular concrete as alternative raw material for Portland clinker production. In: Construction and Building Materials, v. 48 (November 2013).
- (2014): The hydration of cement regenerated from Completely Recyclable Concrete. In: Construction and Building Materials, v. 60 (Juni 2014).
- (2014): Influence of active crack width control on the chloride penetration resistance and global warming potential of slabs made with fly ash+silica fume concrete. In: Construction and Building Materials, v. 67 (September 2014).
- (2016): Methods for measuring pH in concrete: A review. In: Construction and Building Materials, v. 105 (Februar 2016).
- (2017): Influence of chlorides on magnesium sulphate attack for mortars with Portland cement and slag based binders. In: Construction and Building Materials, v. 155 (November 2017).
- (2017): Influence of intensive vacuum mixing and heat treatment on compressive strength and microstructure of reactive powder concrete incorporating secondary copper slag as supplementary cementitious material. In: Construction and Building Materials, v. 155 (November 2017).
- (2017): Mechanical and self-healing properties of cementitious materials with pH-responsive semi-synthetic superabsorbent polymers. In: Materials and Structures, v. 50, n. 6 (Dezember 2017).
- (2017): The influence of sodium and magnesium sulphate on the penetration of chlorides in mortar. In: Materials and Structures, v. 50, n. 2 (April 2017).
Structurae kooperiert mit
