Luc Courard 
- (2023): Effects of Crushing and Grinding on the Porosity of Hardened Cement Paste. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2023): Effect of Crushing Method on the Properties of Produced Recycled Concrete Aggregates. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2022): Performance and durability of self-compacting mortar with recycled sand from crushed brick. In: Journal of Building Engineering, v. 57 (Oktober 2022).
- (2022): Coarse recycled materials for the drainage and substrate layers of green roof system in dry condition: Parametric study and thermal heat transfer. In: Journal of Building Engineering, v. 45 (Januar 2022).
- (2021): Numerical study on the flexural behaviour of normal- and high-strength concrete beams reinforced with GFRP bar, using different amounts of transverse reinforcement. In: Structures, v. 34 (Dezember 2021).
- (2021): Modelling hygrothermal conditions of unsaturated substrate and drainage layers for the thermal resistance assessment of green roof: Effect of coarse recycled materials. In: Energy and Buildings, v. 250 (November 2021).
- (2021): Numerical modeling approach for UHPFRC members including crack spacing formulations. In: Engineering Structures, v. 238 (Juli 2021).
- (2021): Intra granular porosity of mineral powders: modeling and experimentation. In: Materials and Structures, v. 54, n. 2 (23 Februar 2021).
- (2021): Hydric and Durability Performances of Compressed Earth Blocks Stabilized with Industrial and Agro By-Product Binders: Calcium Carbide Residue and Rice Husk Ash. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 6 (Juni 2021).
- (2021): Alternative hydraulic binder development based on brick fines: Influence of particle size and substitution rate. In: Journal of Building Engineering, v. 39 (Juli 2021).
- (2010): Mechanical and durability properties of concrete using contaminated recycled aggregates. In: Cement and Concrete Composites, v. 32, n. 6 (Juli 2010).
- (2017): An investigation on the use of coarse volcanic scoria as sand in Portland cement mortar. In: Case Studies in Construction Materials, v. 7 (Dezember 2017).
- (2021): Modelling thermal and humidity transfers within green roof systems: effect of rubber crumbs and volcanic gravel. In: Advances in Building Energy Research, v. 16, n. 3 (März 2021).
- (2017): Carbonated miscanthus mineralized aggregates for reducing environmental impact of lightweight concrete blocks. In: Sustainable Buildings, v. 2 ( 2017).
- (2020): Physico-chemical and mineralogical characterization of clay materials suitable for production of stabilized compressed earth blocks. In: Construction and Building Materials, v. 241 (April 2020).
- (2018): Chloride diffusion and oxygen permeability of mortars with low active blast furnace slag. In: Construction and Building Materials, v. 181 (August 2018).
- (2018): Formulation of low cost eco-repair mortar based on dune sand and Stipa tenacissima microfibers plant. In: Construction and Building Materials, v. 171 (Mai 2018).
- (2018): Hygro-thermal and durability properties of a lightweight mortar made with foamed plastic waste aggregates. In: Construction and Building Materials, v. 170 (Mai 2018).
- (2019): Chemico-microstructural changes in earthen building materials containing calcium carbide residue and rice husk ash. In: Construction and Building Materials, v. 216 (August 2019).
- (2019): Durable photocatalytic thin coatings for road applications. In: Construction and Building Materials, v. 215 (August 2019).
- (2011): The evaluation of the surface free energy of liquids and solids in concrete technology. In: Construction and Building Materials, v. 25, n. 1 (Januar 2011).
- (2011): Microstructure and durability of mortars modified with medium active blast furnace slag. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2011): Influence of clay in limestone fillers for self-compacting cement based composites. In: Construction and Building Materials, v. 25, n. 3 (März 2011).
- (2014): Limestone fillers cement based composites: Effects of blast furnace slags on fresh and hardened properties. In: Construction and Building Materials, v. 51 (Januar 2014).
- (2017): On the evaluation of interface quality in concrete repair system by means of impact-echo signal analysis. In: Construction and Building Materials, v. 134 (März 2017).
- (2015): Physical characterization methods for supplementary cementitious materials. In: Materials and Structures, v. 48, n. 11 (November 2015).
- (2015): Determination of particle size, surface area, and shape of supplementary cementitious materials by different techniques. In: Materials and Structures, v. 48, n. 11 (November 2015).
- (2012): Influence of the reuse of OSB and marine plywood formworks on concrete surface aesthetics. In: Materials and Structures, v. 45, n. 9 (September 2012).
- (2003): A capillary action test for the investigation of adhesion in repair technology. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 30, n. 6 (Dezember 2003).
- (2018): Improving the properties of recycled concrete aggregates by accelerated carbonation. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 171, n. 3 (Juni 2018).
Structurae kooperiert mit
