Piero Colajanni 
- (2024): Comparison between Design Methods for Seismic Retrofit of Reinforced Concrete Frames Using Dissipative Bracing Systems. In: Buildings, v. 14, n. 10 (8 Oktober 2024).
- (2023): Seismic risk assessment of residential buildings by the Heuristic vulnerability model: influence of fragility curve models and inventory scale. In: Bulletin of Earthquake Engineering, v. 22, n. 3 (November 2023).
- (2023): Innovative connections for steel-concrete-trussed beams: a patented solution. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Experimental characterization of friction properties of materials for innovative beam-to-column dissipative connection for low-damage RC structures. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2022): RC beams retrofitted by FRP oriented in any direction: Influence of the effectiveness factors. In: Engineering Structures, v. 266 (September 2022).
- (2022): Performance of a historical cantilever reinforced concrete bridge with half-joint degradation. In: Structures, v. 37 (März 2022).
- (2022): Seismic Performance of Earthquake-Resilient RC Frames Made with HSTC Beams and Friction Damper Devices. In: Journal of Earthquake Engineering, v. 26, n. 15 (März 2022).
- (2021): Design of RC joints equipped with hybrid trussed beams and friction dampers. In: Engineering Structures, v. 227 (Januar 2021).
- (2020): Comparison of fully non-stationary artificial accelerogram generation methods in reproducing seismicity at a given site. In: Soil Dynamics and Earthquake Engineering, v. 133 (Juni 2020).
- (2014): Design procedure for prestressed concrete beams. In: Computers and Concrete, v. 13, n. 2 (Februar 2014).
- (2012): Generalization of shear truss model to the case of SFRC beams with stirrups. In: Computers and Concrete, v. 9, n. 3 (März 2012).
- (2018): Review of Push-Out and Shear Response of Hybrid Steel-Trussed Concrete Beams. In: Buildings, v. 8, n. 10 (Oktober 2018).
- (2015): FEM analysis of push-out test response of Hybrid Steel Trussed Concrete Beams (HSTCBs). In: Journal of Constructional Steel Research, v. 111 (August 2015).
- (1999): Braced Frames with Hysteretic Dissipative Devices: Seismic Response and Design Criteria. In: Journal of Earthquake Engineering, v. 3, n. 1 ( 1999).
- (2007): Ductility of Reinforced Concrete Members Externally Wrapped with Fiber-Reinforced Polymer Sheets. In: Journal of Composites for Construction, v. 11, n. 3 (Juni 2007).
- (2014): Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling. In: Construction and Building Materials, v. 52 (Februar 2014).
- (2014): Effects of confinement level, cross-section shape and corner radius on the cyclic behavior of CFRCM confined concrete columns. In: Construction and Building Materials, v. 55 (März 2014).
- (2014): Experimental in situ behaviour of unreinforced masonry elements retrofitted by pre-tensioned stainless steel ribbons. In: Construction and Building Materials, v. 73 (Dezember 2014).
- (2016): Analytical evaluation of steel–concrete composite trussed beam shear capacity. In: Materials and Structures, v. 49, n. 8 (August 2016).
- (2017): Analytical prediction of the shear connection capacity in composite steel–concrete trussed beams. In: Materials and Structures, v. 50, n. 1 (Februar 2017).
- (2014): Increasing the Capacity of Existing Bridges by Using Unbonded Prestressing Technology: A Case Study. In: Advances in Civil Engineering, v. 2014 ( 2014).
- (2013): An Analytical Step-by-Step Procedure to Derive the Flexural Response of RC Sections in Compression. In: Advances in Civil Engineering, v. 2013 ( 2013).
- (1995): Seismic response of braced frames with and without friction dampers. In: Engineering Structures, v. 17, n. 2 (Februar 1995).
- (2013): Analytical prediction of ultimate moment and curvature of RC rectangular sections in compression. In: Bulletin of Earthquake Engineering, v. 11, n. 6 (Juni 2013).
- (2014): Shear capacity in concrete beams reinforced by stirrups with two different inclinations. In: Engineering Structures, v. 81 (Dezember 2014).
- (1997): Hysteretic Behavior Characterization of Friction-Damped Braced Frames. In: Journal of Structural Engineering (ASCE), v. 123, n. 8 (August 1997).
- (2013): Experimental test results vs. analytical prediction of welded joint strength in hybrid steel trussed concrete beams (HSTCBs). In: European Journal of Environmental and Civil Engineering, v. 17, n. 8 (September 2013).
- (2017): Experimental Investigation of the Shear Response of Precast Steel–Concrete Trussed Beams. In: Journal of Structural Engineering (ASCE), v. 143, n. 1 (Januar 2017).
- (2016): Increasing the flexural capacity of RC beams using steel angles and pre-tensioned stainless steel ribbons. In: Structural Concrete, v. 17, n. 5 (Oktober 2016).
- (2017): Increasing the shear capacity of reinforced concrete beams using pretensioned stainless steel ribbons. In: Structural Concrete, v. 18, n. 3 (Juni 2017).
Structurae kooperiert mit
