Eunsoo Choi 
- (2024): CFD simulation-based fragility analysis of reinforced concrete buildings damaged by traveling fire. In: Engineering Structures, v. 317 (Oktober 2024).
- (2023): Effects of double-arched geometry and tensile strength on the pullout resistance of fibers. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2022): Evaluating the Symmetric Behavior of Single Superelastic SMA Rings with Circular and Elliptic Shapes. In: International Journal of Steel Structures, v. 22, n. 5 (September 2022).
- (2022): Enhancement of compressive strength and strain ductility of SMA fiber reinforced concrete considering fiber’s aspect ratios. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Enabling shape memory effect wires for acting like superelastic wires in terms of showing recentering capacity in mortar beams. In: Construction and Building Materials, v. 319 (Februar 2022).
- (2022): Development of cement composite with high-temperature detection performance using green earth. In: Case Studies in Construction Materials, v. 16 (Juni 2022).
- (2022): Active action of prestressing on direct tensile behavior of mortar reinforced with NiTi SMA crimped fibers. In: Composite Structures, v. 281 (Februar 2022).
- (2022): Estimating the plastic hinge length of rectangular concrete columns reinforced with NiTi superelastic shape memory alloys. In: Engineering Structures, v. 252 (Februar 2022).
- (2021): Experimental investigation on the performance of flexural displacement recovery using crimped shape memory alloy fibers. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): Explainable machine learning models for punching shear strength estimation of flat slabs without transverse reinforcement. In: Journal of Building Engineering, v. 39 (Juli 2021).
- (2020): Effect of crimped SMA fiber geometry on recovery stress and pullout resistance. In: Composite Structures, v. 247 (September 2020).
- (2018): Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effects. In: Composite Structures, v. 202 (Oktober 2018).
- (2020): An Experimental Study on the Performance of a Damper Fabricated by Dual Rubber Springs. In: International Journal of Steel Structures, v. 20, n. 6 ( 2020).
- (2004): Development of elastic damage load theorem for damage detection in a statically determinate beam. In: Computers & Structures, v. 82, n. 29-30 (November 2004).
- (2014): Bond behavior of steel deformed bars embedded in concrete confined by FRP wire jackets. In: Construction and Building Materials, v. 68 (Oktober 2014).
- (2016): Direct tensile behavior of shape-memory-alloy fiber-reinforced cement composites. In: Construction and Building Materials, v. 102 (Januar 2016).
- (2016): Experimental study of the reinforcement effect of macro-type high strength polypropylene on the flexural capacity of concrete. In: Construction and Building Materials, v. 126 (November 2016).
- (2012): Bond and splitting behaviour of reinforced concrete confined by steel jackets without grouting. In: Magazine of Concrete Research, v. 64, n. 3 (März 2012).
- (2013): Effect of steel wrapping jackets on the bond strength of concrete and the lateral performance of circular RC columns. In: Engineering Structures, v. 48 (März 2013).
- (2005): Evaluation of earthquake deformation and performance for RC bridge piers. In: Engineering Structures, v. 27, n. 10 (August 2005).
- (2015): Damage assessment of older highway bridges subjected to three-dimensional ground motions: Characterization of shear–axial force interaction on seismic fragilities. In: Engineering Structures, v. 87 (März 2015).
- (2015): Crack-closing of cement mortar beams using NiTi cold-drawn SMA short fibers. In: Smart Materials and Structures, v. 24, n. 1 (Januar 2015).
- (2008): The behavior of concrete cylinders confined by shape memory alloy wires. In: Smart Materials and Structures, v. 17, n. 6 (Dezember 2008).
- (2010): The confining effectiveness of NiTiNb and NiTi SMA wire jackets for concrete. In: Smart Materials and Structures, v. 19, n. 3 (März 2010).
- (2011): Comparing the cyclic behavior of concrete cylinders confined by shape memory alloy wire or steel jackets. In: Smart Materials and Structures, v. 20, n. 9 (September 2011).
- (2010): Development of a vehicle image-tracking system based on a long-distance detection algorithm. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 37, n. 11 (November 2010).
- (2011): Design, analysis and application of innovative composite PR connections between steel beams and CFT columns. In: Smart Materials and Structures, v. 20, n. 2 (Januar 2011).
- (2018): Assessment of probabilistic seismic performance of RC columns jacketed by FRP winding wires using analytical models. In: Engineering Structures, v. 171 (September 2018).
- (2018): Crack monitoring in shape memory alloy/cement composite materials using water-dispersed quantum dots. In: Smart Materials and Structures, v. 27, n. 9 (September 2018).
- (2018): Dilation behavior of normal strength concrete confined by FRP wire jackets. In: Construction and Building Materials, v. 190 (November 2018).
Structurae kooperiert mit
