Xin Cheng 
- (2024): A Theoretical Calculation Model of H-Section Steel Members for Biaxial Bending Moments. In: International Journal of Steel Structures, v. 24, n. 1 (Januar 2024).
- (2024): Relating early-age hydration and flow loss of mortar prepared with manufactured sand. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2024): Study on behavior of slender H-section stub columns subjected to axial compression. In: Journal of Constructional Steel Research, v. 212 (Januar 2024).
- (2023): Stressing state features of H-steel columns under cyclic biaxial bending action revealed from experimental residual strains. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2023): Ultimate biaxial bending resistance of H-section steel members under different loading paths. In: Journal of Constructional Steel Research, v. 200 (Januar 2023).
- (2022): Study on green restoration of exposed mountain: Effect of isobutylidene diurea on slow-release of total nitrogen and physiological characteristics of euonymus fortune in planted eco-concrete. In: Construction and Building Materials, v. 359 (Dezember 2022).
- (2022): Synthesis and effect of highly active nano-SiO2 on ion/water transmission property of cement-based materials. In: Journal of Building Engineering, v. 59 (November 2022).
- (2022): Regulations on the hydration, morphology, and sulfate-attack resistivity of C3A with micro/nano-silica particles. In: Construction and Building Materials, v. 324 (März 2022).
- (2021): Synergistic effects of supplementary cementitious materials in limestone and calcined clay-replaced slag cement. In: Construction and Building Materials, v. 282 (Mai 2021).
- (2022): Ultimate Behavior and Design of Cold-Formed Steel Square Hollow Section Members. In: International Journal of Steel Structures, v. 22, n. 3 (April 2022).
- (2021): Stability and leaching resistance performance of SAC repair and solidification materials exposed to gamma irradiation. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Study on Ultimate Capacity of Steel H-Section Members Under Combined Biaxial Bending and Axial Force. In: International Journal of Steel Structures, v. 21, n. 5 (September 2021).
- (2021): Printability and efflorescence control of admixtures modified 3D printed white Portland cement-based materials based on the response surface methodology. In: Journal of Building Engineering, v. 38 (Juni 2021).
- (2021): Using layered double hydroxides and anion exchange resin to improve the mechanical properties and chloride binding capacity of cement mortars. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2020): Synergistic effects of nano-silica and fly ash on properties of cement-based composites. In: Construction and Building Materials, v. 262 (November 2020).
- (2013): Properties of Waste-Based Geopolymer Building Blocks. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): SiO2/TiO2 composite powders deposited on cement-based materials: Rhodamine B removal and the bonding mechanism. In: Construction and Building Materials, v. 241 (April 2020).
- (2020): Rheological parameters and building time of 3D printing sulphoaluminate cement paste modified by retarder and diatomite. In: Construction and Building Materials, v. 234 (Februar 2020).
- (2020): Variation of resistance to chloride penetration of iron-rich phosphoaluminate cement with admixture materials subjected to NaCl environment. In: Construction and Building Materials, v. 231 (Januar 2020).
- (2019): Pore structure evolution and strength development of hardened cement paste with super low water-to-cement ratios. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2020): Variation in the sulfate attack resistance of iron rich-phosphoaluminate cement with mineral admixtures subjected to a Na2SO4 solution. In: Construction and Building Materials, v. 230 (Januar 2020).
- (2019): Recycling of paper sludge powder for achieving sustainable and energy-saving building materials. In: Construction and Building Materials, v. 229 (Dezember 2019).
- (2019): Sectional constitutive model for the thin-walled steel H-section beam-column element. In: Journal of Constructional Steel Research, v. 156 (Mai 2019).
- (2018): Ultimate strength of H-sections under combined compression and uniaxial bending considering plate interaction. In: Journal of Constructional Steel Research, v. 143 (April 2018).
- (2015): Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures. In: Construction and Building Materials, v. 76 (Februar 2015).
- (2016): The use of tetraethyl orthosilicate silane (TEOS) for surface-treatment of hardened cement-based materials: A comparison study with normal treatment agents. In: Construction and Building Materials, v. 117 (August 2016).
- (2016): The synergistic effect of nano-silica with blast furnace slag in cement based materials. In: Construction and Building Materials, v. 126 (November 2016).
- (2018): Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials. In: Construction and Building Materials, v. 189 (November 2018).
- (2018): Study on the preparation and properties of belite-ye'elimite-alite cement. In: Construction and Building Materials, v. 182 (September 2018).
Structurae kooperiert mit
