Zhiyong Chen 
- : Seismic performance assessment of post-tensioned CLT shear wall buildings with buckling-restrained axial fuses. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil.
- (2023): Structural performance of balloon mass timber shear walls under in-plane lateral loads. In: Structures, v. 58 (Dezember 2023).
- (2024): Theoretical Building Height Limits of Balloon Mass Timber Shear Wall Systems. In: Journal of Structural Engineering (ASCE), v. 150, n. 1 (Januar 2024).
- : Seismic Performance of Mid-Rise Hybrid Light Wood Frame Buildings and Influence of Diaphragm Flexibility. Vorgetragen bei: Structures Congress 2013, Pittsburgh, Pennsylvania, May 2-4, 2013.
- (2021): Construction Technology of Micro Bench Cut Method for Weak Rock Tunnel with High In-situ Stress. In: Geotechnical and Geological Engineering, v. 40, n. 3 (23 September 2021).
- (2021): Seismic Response of Braced Heavy Timber Frames with Riveted Connections. In: Journal of Performance of Constructed Facilities (ASCE), v. 35, n. 5 (Oktober 2021).
- (2021): Contribution of Partition Walls in Lateral Load–Resisting Systems of Low-Rise Light Wood Frame Buildings. In: Journal of Structural Engineering (ASCE), v. 147, n. 4 (April 2021).
- (2020): Mechanics-based analytical models for balloon-type cross-laminated timber (CLT) shear walls under lateral loads. In: Engineering Structures, v. 208 (April 2020).
- (2021): Seismic force-modification factors for mid-rise wood-frame buildings with shearwalls using wood screws. In: Bulletin of Earthquake Engineering, v. 19, n. 3 (Januar 2021).
- (2017): Fatigue reliability design of composite leaf springs based on ply scheme optimization. In: Composite Structures, v. 168 (Mai 2017).
- (2020): Connection and System Ductility Relationship for Braced Timber Frames. In: Journal of Structural Engineering (ASCE), v. 146, n. 12 (Dezember 2020).
- (2020): A novel floor-isolated re-centering system for prefabricated modular mass timber construction – Concept development and preliminary evaluation. In: Engineering Structures, v. 222 (November 2020).
- (2020): Material-based models for post-tensioned shear wall system with energy dissipators. In: Engineering Structures, v. 213 (Juni 2020).
- (2020): Structural Performance of Post-Tensioned CLT Shear Walls with Energy Dissipators. In: Journal of Structural Engineering (ASCE), v. 146, n. 4 (April 2020).
- (2020): Wood ST: A Temperature-Dependent Plastic-Damage Constitutive Model Used for Numerical Simulation of Wood-Based Materials and Connections. In: Journal of Structural Engineering (ASCE), v. 146, n. 3 (März 2020).
- (2020): Grinding kinetics of waste glass powder and its composite effect as pozzolanic admixture in cement concrete. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Lateral Load-Resisting System Using Mass Timber Panel for High-Rise Buildings. In: Frontiers in Built Environment, v. 3 (Februar 2018).
- (2020): Criterion for Applying Two-Step Analysis Procedure to Seismic Design of Wood-Frame Buildings on Concrete Podium. In: Journal of Structural Engineering (ASCE), v. 146, n. 1 (Januar 2020).
- (2017): Lateral Behavior of Light Wood-Frame Shear Walls with Gypsum Wall Board. In: Journal of Structural Engineering (ASCE), v. 143, n. 8 (August 2017).
- (2016): Contribution of Type-X Gypsum Wall Board to the Racking Performance of Light-Frame Wood Shear Walls. In: Journal of Structural Engineering (ASCE), v. 142, n. 5 (Mai 2016).
- (2014): Seismic Response of Midrise Light Wood-Frame Buildings with Portal Frames. In: Journal of Structural Engineering (ASCE), v. 140, n. 8 (August 2014).
- (2014): Structural performance of Dou-Gong brackets of Yingxian Wood Pagoda under vertical load – An experimental study. In: Engineering Structures, v. 80 (Dezember 2014).
- (2016): Energy-Dissipation Performance of Typical Beam-Column Joints in Yingxian Wood Pagoda: Experimental Study. In: Journal of Performance of Constructed Facilities (ASCE), v. 30, n. 3 (Juni 2016).
- (2014): Seismic Performance of a Hybrid Building System Consisting of a Light Wood Frame Structure and a Reinforced Masonry Core. In: Journal of Performance of Constructed Facilities (ASCE), v. 28, n. 6 (Dezember 2014).
- (2014): Load Distribution in Timber Structures Consisting of Multiple Lateral Load Resisting Elements with Different Stiffnesses. In: Journal of Performance of Constructed Facilities (ASCE), v. 28, n. 6 (Dezember 2014).
Structurae kooperiert mit
