Yue Chen 
- (2024): Characterizing energy-related occupant behavior towards urban residential buildings in China with statistical database establishment. In: Energy and Buildings, v. 324 (Dezember 2024).
- (2024): Hydration and microstructure evolution of cement paste in low vacuum environments. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): A novel modeling method to study compressive behaviors of 3D braided composites considering effects of fiber breakage and waviness defects. In: Composite Structures, v. 340 (Juli 2024).
- (2023): Advancements in Optimal Sensor Placement for Enhanced Structural Health Monitoring: Current Insights and Future Prospects. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2023): Effect of low-vacuum environment on the strength and permeability of cement-based materials. In: Construction and Building Materials, v. 400 (Oktober 2023).
- (2023): Basic Mechanical Properties of Laminated Flattened-Bamboo Composite: An Experimental and Parametric Investigation. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 8 (August 2023).
- (2023): Drying shrinkage behavior of cement mortar under low vacuum conditions. In: Construction and Building Materials, v. 374 (April 2023).
- (2023): Model-free dynamic management strategy for low-carbon home energy based on deep reinforcement learning accommodating stochastic environments. In: Energy and Buildings, v. 278 (Januar 2023).
- (2022): A multi-objective design method for seismic retrofitting of existing reinforced concrete frames using pin-supported rocking walls. In: Frontiers of Structural and Civil Engineering, v. 16, n. 9 (September 2022).
- (2022): Experimental evaluation of the dowel-bearing strength of laminated flattened-bamboo lumber perpendicular to grain. In: Construction and Building Materials, v. 350 (Oktober 2022).
- (2022): Detection and quantitative evaluation of elastic stress state of reinforcements in RC beams based on magnetic signal characteristics. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Effect of Atmospheric Pressure on the Simultaneous Nitrification, Denitrification, and Phosphorous Removal from Anaerobic/Aerobic Sequencing Batch Reactor System. In: Journal of Environmental Engineering (ASCE), v. 148, n. 6 (Juni 2022).
- (2022): Ability of Hardened Paste of Cementitious Calcium–Aluminophosphate Mineral to Bind with Chloride Ions. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 5 (Mai 2022).
- (2022): Development of a three-directional vibration isolator for buildings subject to metro- and earthquake-induced vibrations. In: Engineering Structures, v. 252 (Februar 2022).
- (2021): Differences of the Pore Structure and Methane Adsorption/Desorption between Vitrain and Durain of Low-Rank Coals: Case Study in the Huanglong Coalfield, Southern Ordos Basin, China. In: Journal of Energy Engineering, v. 147, n. 5 (Oktober 2021).
- (2020): Historic Neighborhood Design Based on Facility Heatmap and Pedestrian Simulation: Case Study in China. In: Journal of Urban Planning and Development, v. 146, n. 2 (Juni 2020).
- (2015): Modifying the Formula of the Ultimate Bearing Capacity of a Shallow Circular Foundation. In: Journal of Highway and Transportation Research and Development (English Edition), v. 9, n. 1 (März 2015).
- (2015): Modifying the Formula of the Ultimate Bearing Capacity of a Shallow Square Foundation. In: Journal of Highway and Transportation Research and Development (English Edition), v. 9, n. 4 (Dezember 2015).
- (1985): Analysis of Multi-directional Simple Shear Tests on Sand. In: Soils and Foundations, v. 25, n. 4 (Dezember 1985).
- (2020): Base isolation of buildings for subway‐induced environmental vibration: Field experiments and a semi‐analytical prediction model. In: The Structural Design of Tall and Special Buildings, v. 29, n. 16 (November 2020).
- (2020): Numerical analysis of fracturing behavior in fully-graded concrete with oversized aggregates from mesoscopic perspective. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Mechanism and optimum design of shared tuned mass damper for twin‐tower structures connected at the top by an isolated corridor. In: The Structural Design of Tall and Special Buildings, v. 29, n. 8 (10 Juni 2020).
- (2020): Effect of inhabitant behavioral responses on adaptive thermal comfort under hot summer and cold winter climate in China. In: Building and Environment, v. 168 (Januar 2020).
- (2019): Comparative Study on the Effect of Organic and Inorganic Fiber on the Anti-wheel Impact Performance of Airport Pavement Concrete under Freeze-thaw Environment. In: Construction and Building Materials, v. 211 (Juni 2019).
- (2013): Bending Performance of Box-Based Cross-Laminated Timber Systems. In: Journal of Structural Engineering (ASCE), v. 139, n. 12 (Dezember 2013).
- (2008): Optimal design of steel portal frames based on genetic algorithms. In: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 4 (Oktober 2008).
- (2018): Comparative analysis on the anti-wheel impact performance of steel fiber and reticular polypropylene synthetic fiber reinforced airport pavement concrete under elevated temperature aging environment. In: Construction and Building Materials, v. 192 (Dezember 2018).
- (2018): Model experiment of uneven frost heave of airport pavement structure on coarse-grained soils foundation. In: Construction and Building Materials, v. 188 (November 2018).
- (2018): Comparative study on the effect of synthetic fiber on the preparation and durability of airport pavement concrete. In: Construction and Building Materials, v. 184 (September 2018).
- (2018): The Analysis of outrigger numbers and locations in outrigger braced structures using a multiobjective genetic algorithm. In: The Structural Design of Tall and Special Buildings, v. 27, n. 1 (Januar 2018).
Structurae kooperiert mit
