Ying Chen 
- (2019): Comparative Study of Predictive Analysis Methods to Estimate Bridge Response. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2673, n. 9 (8 Mai 2019).
- (2021): Bridge Response and Heavy Truck Classification Framework Based on a Two-Step Machine Learning Algorithm. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2676, n. 3 (2 Dezember 2021).
- (2024): Design method and experimental investigation of two-stage prestressed precast continuous beams. In: Structures, v. 63 (Mai 2024).
- (2023): Damage evaluation of steel frame subjected to impact load at midspan. In: ce/papers, v. 6, n. 3-4 (September 2023).
- (2024): Corrosion behavior of 700 MPa grade weathering steel with 4.0 wt% Ni and 5.0 wt% Cr in simulated marine atmospheric environment. In: Construction and Building Materials, v. 414 (Februar 2024).
- (2023): Crack behavior of expanded polystyrene foam-ceramsite composite thermal insulation mortar. In: Journal of Building Engineering, v. 74 (September 2023).
- (2022): Dynamic energy efficient task offloading and resource allocation for NOMA-enabled IoT in smart buildings and environment. In: Building and Environment, v. 226 (Dezember 2022).
- (2023): Building coupling loss measurement and prediction due to train-induced vertical vibrations. In: Soil Dynamics and Earthquake Engineering, v. 164 (Januar 2023).
- (2023): Dynamic behaviors of butt welds and fillet welds under intermediate strain rate. In: Journal of Constructional Steel Research, v. 201 (Februar 2023).
- (2023): Damage mechanism and experimental study of continuous bridges equipped with Sc-FSB. In: Structures, v. 47 (Januar 2023).
- (2022): Analysis of Bridge Health Detection Based on Data Fusion. In: Advances in Civil Engineering, v. 2022 (Januar 2022).
- (2022): Analysis and Engineering Practice of Factors Affecting Top-Coal Recovery in a Large Dip Coal Seam. In: Advances in Civil Engineering, v. 2022 (Januar 2022).
- (2022): Damage evaluation of a welded beam–column joint with surface imperfections subjected to impact loads. In: Engineering Structures, v. 261 (Juni 2022).
- (2021): Control and Application of Terrain Curvature on Dynamic Disasters: A Case Study of Coal and Gas Outbursts in the Pingdingshan Mining Area, China. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Dynamic tensile behaviors of welded steel joint material. In: Journal of Constructional Steel Research, v. 183 (August 2021).
- (2019): Aseismic effect and parametric analysis of the safe-belt device for a continuous bridge with equal height piers. In: Engineering Structures, v. 199 (November 2019).
- (2019): Behavior and design method for offset multi-wedges swaged couplers under uniaxial tension. In: Advances in Structural Engineering, v. 24, n. 4 (Februar 2019).
- (2020): Aseismic study of the frame structure with hanging prefabricated infill plate. In: The Structural Design of Tall and Special Buildings, v. 29, n. 17 (10 Dezember 2020).
- (2020): Analysis of the Damage Characteristics and Energy Dissipation of Rocks with a Vertical Hole under Cyclic Impact Loads. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Early hydration properties and performance evolution of phosphoaluminate cement concrete. In: Construction and Building Materials, v. 233 (Februar 2020).
- (2016): Effect of high-strength concrete on shear behavior of dry joints in precast concrete segmental bridges. In: Steel and Composite Structures, v. 22, n. 5 ( 2016).
- (2019): Dimensional Tolerance Control for Prefabricated Building Components. In: ACI Structural Journal, v. 116, n. 4 (Juli 2019).
- (2019): Analytical derivation of rib bearing angle of reinforcing bar subject to axial loading. In: Magazine of Concrete Research, v. 71, n. 4 (Februar 2019).
- (2015): Accelerated simulation of chloride ingress into concrete under drying–wetting alternation condition chloride environment. In: Construction and Building Materials, v. 93 (September 2015).
- (2017): Concrete damage diagnosis using electromechanical impedance technique. In: Construction and Building Materials, v. 136 (April 2017).
- (2010): Decision support for construction method selection in concrete buildings: Prefabrication adoption and optimization. In: Automation in Construction, v. 19, n. 6 (Oktober 2010).
- (2014): Coupled seepage-elastoplastic-damage analysis of saturated porous media and its application to water conveyance tunnel. In: Tunnelling and Underground Space Technology, v. 44 (September 2014).
- (2017): Design, optimization and numerical modelling of a novel floating pendulum wave energy converter with tide adaptation. In: China Ocean Engineering, v. 31, n. 5 (Oktober 2017).
- (2018): Characterization of a compliant multi-layer system for tactile sensing with enhanced sensitivity and range. In: Smart Materials and Structures, v. 27, n. 6 (Juni 2018).
- (2018): Compliant multi-layer tactile sensing for enhanced identification of human touch. In: Smart Materials and Structures, v. 27, n. 12 (Dezember 2018).
Structurae kooperiert mit
