Xin Chen 
- (2024): Review of synthetic polymer-based thermal insulation materials in construction and building. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Optimizing mechanical performance and flow characteristics of alkaline fly ash/rice husk ash composite backfill: Insights from multi-factor analysis and engineering optimization. In: Journal of Building Engineering, v. 95 (Oktober 2024).
- (2024): Reverse Model for Curved Bridge Measurement Based on 3D Laser Scanning Technology. In: Advances in Civil Engineering, v. 2024 (Januar 2024).
- (2024): An online fault detection and diagnosis method of sensors in district heating substations based on long short_term memory network and adaptive threshold selection algorithm. In: Energy and Buildings, v. 308 (April 2024).
- (2023): Recycling thermal modified phosphogypsum in calcium sulfoaluminate cement: Evolution of engineering properties and micro-mechanism. In: Construction and Building Materials, v. 373 (April 2023).
- (2024): Optimization Analysis of Asymmetric Outrigger-Braced Structures with the Influence of Core-Wall Width. In: Journal of Structural Engineering (ASCE), v. 150, n. 1 (Januar 2024).
- (2024): Numerical Investigation of Dynamic Behavior of Water with Different Initial Forms in Wave Channel. In: Journal of Energy Engineering, v. 150, n. 1 (Februar 2024).
- (2023): A novel bio-inspired helmet with auxetic lattice liners for mitigating traumatic brain injury. In: Smart Materials and Structures, v. 32, n. 10 (30 August 2023).
- (2023): Prediction of ground subsidence by shield tunneling using ensemble learning. In: Tunnelling and Underground Space Technology, v. 141 (November 2023).
- (2023): Nanoscale study on adhesion performance and aging degree prediction of warm mix asphalt under UV aging condition. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2022): Numerical and experimental investigation on seismic behavior of the linked column steel braced frame system with energy-dissipating link beam at column base. In: Journal of Building Engineering, v. 58 (Oktober 2022).
- (2022): Network Perspective in Megaproject Management: A Systematic Review. In: Journal of Construction Engineering and Management, v. 148, n. 7 (Juli 2022).
- (2021): A novel thermo-thickening viscosity modifying admixture to improve settlement stability of cement slurry under high temperatures. In: Construction and Building Materials, v. 295 (August 2021).
- (2021): Production of lightweight aggregate ceramsite from red mud and municipal solid waste incineration bottom ash: Mechanism and optimization. In: Construction and Building Materials, v. 287 (Juni 2021).
- (2022): A new demountable light-gauge steel framed wall: Flexural behavior, thermal performance and life cycle assessment. In: Journal of Building Engineering, v. 47 (April 2022).
- (2022): Preparation and characteristics of modified red mud-municipal solid waste incineration bottom ash binder. In: Journal of Building Engineering, v. 46 (April 2022).
- (2018): Numerical Study on Effect of Joint Strength Mobilization on Behavior of Rock Masses with Large Nonpersistent Joints under Uniaxial Compression. In: International Journal of Geomechanics, v. 18, n. 11 (November 2018).
- (2017): Model of solar diffuse radiation transmission through circular perforated louvers and experimental verification. In: Energy and Buildings, v. 142 (Mai 2017).
- (2019): Numerical simulation of arbitrary holes in orthotropic media by an efficient computational method based on adaptive XIGA. In: Composite Structures, v. 229 (Dezember 2019).
- (2013): New Trend in Facilities for the Elders in Japan - Small Multi-Care Facilities. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Predicting Flight Demand under Uncertainty. In: KSCE Journal of Civil Engineering, v. 24, n. 2 (Januar 2020).
- (2019): Physiological and thermal response to real-life transient conditions during winter in severe cold area. In: Building and Environment, v. 157 (Juni 2019).
- (2018): Quantitative effects of urban spatial characteristics on outdoor thermal comfort based on the LCZ scheme. In: Building and Environment, v. 143 (Oktober 2018).
- (2018): Outdoor thermal comfort and adaptation in severe cold area: A longitudinal survey in Harbin, China. In: Building and Environment, v. 143 (Oktober 2018).
- (2020): A novel method for rapidly calculating explosion dynamic displacement response of reticulated shell structure based on influence surfaces. In: Advances in Structural Engineering, v. 23, n. 6 (April 2020).
- (2011): Pseudo-dynamic test and numerical simulation of high-strength concrete frame structure reinforced with high-strength rebars. In: Earthquake Engineering and Engineering Vibration, v. 10, n. 2 (Juni 2011).
- (2011): A new isolation device using shape memory alloy and its application for long-span structures. In: Earthquake Engineering and Engineering Vibration, v. 10, n. 2 (Juni 2011).
- (2013): Near-Bed Sediment Condition in Oscillatory Sheet Flows. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 139, n. 5 (September 2013).
- (2018): Modelling of glued laminated timber joints with glued-in rod considering bond-slip location function. In: Engineering Structures, v. 176 (Dezember 2018).
- (2018): Modeling Deformation Induced by Thermal Loading Using Long-Term Bridge Monitoring Data. In: Journal of Performance of Constructed Facilities (ASCE), v. 32, n. 3 (Juni 2018).
Structurae kooperiert mit
