Hong Chen 
- (2025): A novel prediction framework for estimating high spatial resolution near-ground PM2.5 and O3 concentrations at street-level in urban areas. In: Building and Environment, v. 267 (Januar 2025).
- (2024): Seismic responses of an intensively constructed metro station-passageway-shaft structure system. In: Frontiers of Structural and Civil Engineering, v. 18, n. 5 (Mai 2024).
- (2024): Study on the bond performance of steel bars in early-age concrete considering the effect of circumferentially lateral pressures. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): A Scientometric Examination on Performance-Driven Optimization in Urban Block Design Research: State of the Art and Future Perspectives. In: Buildings, v. 14, n. 2 (1 Februar 2024).
- (2023): Residual fracture toughness and fracture energy of concrete with different strengths after fatigue loading. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2024): A study on urban block design strategies for improving pedestrian-level wind conditions: CFD-based optimization and generative adversarial networks. In: Energy and Buildings, v. 304 (Februar 2024).
- (2023): Research on mechanical properties and hydration characteristics of ultra-high performance concrete with high-volume fly ash microsphere. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Shear behavior of cylindrical pin-sleeve connectors of neighboring segments of immersed tunnels. In: Tunnelling and Underground Space Technology, v. 140 (Oktober 2023).
- (2023): Optimizing block morphology for reducing traffic pollutant concentration in adjacent external spaces of street canyons: A machine learning approach. In: Building and Environment, v. 242 (August 2023).
- (2023): Production of green, low-cost and high-performance anorthite-based ceramics from reduced copper slag. In: Construction and Building Materials, v. 375 (April 2023).
- (2022): Urban-rural fringe identification and spatial form transformation during rapid urbanization: A case study in Wuhan, China. In: Building and Environment, v. 226 (Dezember 2022).
- (2022): Research on BIM Application Two-Dimensional Maturity Model. In: Buildings, v. 12, n. 11 (27 Oktober 2022).
- (2022): Short-Term Online Taxi-Hailing Demand Prediction Based on the Multimode Traffic Data in Metro Station Areas. In: Journal of Transportation Engineering, Part A: Systems, v. 148, n. 6 (Juni 2022).
- (2021): Nonlinear relationship between urban form and street-level PM2.5 and CO based on mobile measurements and gradient boosting decision tree models. In: Building and Environment, v. 205 (November 2021).
- (2003): Preliminary Evaluation of Microbially Mediated Precipitation of Cadmium, Chromium, and Nickel by Rhizosphere Consortium. In: Journal of Environmental Engineering (ASCE), v. 129, n. 1 (Januar 2003).
- (2021): Transfer length prediction in pre-tensioned concrete beams under corrosive cracking. In: Structures, v. 30 (April 2021).
- (2010): Simulation analysis of site design and layout planning to mitigate thermal environment of riverside residential development. In: Building Simulation, v. 3, n. 1 (März 2010).
- (2020): Research on wind barrier of canyon bridge-tunnel junction based on wind characteristics. In: Advances in Structural Engineering, v. 24, n. 5 (November 2020).
- (2004): Study on outdoor thermal environment of apartment block in Shenzhen, China with coupled simulation of convection, radiation and conduction. In: Energy and Buildings, v. 36, n. 12 (Dezember 2004).
- (2008): Study on sustainable redevelopment of a densely built-up area in Tokyo by introducing a distributed local energy supply system. In: Energy and Buildings, v. 40, n. 5 (Januar 2008).
- (2020): Preparation and properties of sintering red mud unburned road brick using orthogonal experiments. In: Construction and Building Materials, v. 238 (März 2020).
- (2009): Study on mitigation measures for outdoor thermal environment on present urban blocks in Tokyo using coupled simulation. In: Building and Environment, v. 44, n. 11 (November 2009).
- (2009): Optimum design for smoke-control system in buildings considering robustness using CFD and Genetic Algorithms. In: Building and Environment, v. 44, n. 11 (November 2009).
- (2008): Study on optimum design method for pleasant outdoor thermal environment using genetic algorithms (GA) and coupled simulation of convection, radiation and conduction. In: Building and Environment, v. 43, n. 1 (Januar 2008).
- (2008): Study on optimum arrangement of trees for design of pleasant outdoor environment using multi-objective genetic algorithm and coupled simulation of convection, radiation and conduction. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 96, n. 10-11 (Oktober 2008).
- (2002): Spread-of-plasticity analysis of three-dimensional steel frames. In: Journal of Constructional Steel Research, v. 58, n. 2 (Februar 2002).
- (2016): Propagation and amplitude decay mechanisms of internal solitary waves. In: China Ocean Engineering, v. 30, n. 6 (November 2016).
- (1991): Thin‐Walled Space Frames. I: Large‐Deformation Analysis Theory. In: Journal of Structural Engineering (ASCE), v. 117, n. 8 (August 1991).
- (1991): Thin‐Walled Space Frames. II: Algorithmic Details and Applications. In: Journal of Structural Engineering (ASCE), v. 117, n. 8 (August 1991).
- (2018): Novel concrete-temperature monitoring method by using embedded passive wireless sensor. In: Magazine of Concrete Research, v. 70, n. 9 (Mai 2018).
Structurae kooperiert mit
