Arnaud Castel 
- (2024): Performance of cementitious systems containing calcined clay in a chloride-rich environment: a review by TC-282 CCL. In: Materials and Structures, v. 57, n. 7 (13 August 2024).
- (2021): On the competitive antagonism effect in combined chloride-sulfate attack: A numerical exploration. In: Cement and Concrete Research, v. 144 (Juni 2021).
- (2021): Performance of fly ash concrete with ferronickel slag fine aggregate against alkali-silica reaction and chloride diffusion. In: Cement and Concrete Research, v. 139 (Januar 2021).
- (2020): Reinforcement corrosion in limestone flash calcined clay cement-based concrete. In: Cement and Concrete Research, v. 132 (Juni 2020).
- (2014): Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams. In: Cement and Concrete Research, v. 56 (Februar 2014).
- (2023): Shrinkage of blended cement concrete with fly ash or limestone calcined clay. In: Materials and Structures, v. 56, n. 1 (30 Januar 2023).
- (2022): Non-destructive monitoring of incipient corrosion in reinforced concrete with top-bar defect using a combination of electrochemical and ultrasonic techniques. In: Construction and Building Materials, v. 360 (Dezember 2022).
- (2023): Modeling blended cement concrete tensile creep for standard ring test application. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2022): Numerical simulation of risk mitigation strategies for early-age thermal cracking and DEF in concrete. In: Construction and Building Materials, v. 322 (März 2022).
- (2011): Modeling of steel and concrete strains between primary cracks for the prediction of cover-controlled cracking in RC-beams. In: Engineering Structures, v. 33, n. 12 (Dezember 2011).
- (2010): RC beams strengthened with NSM CFRP rods and modeling of peeling-off failure. In: Composite Structures, v. 92, n. 8 (Juli 2010).
- (2019): Risk of early age cracking in geopolymer concrete due to restrained shrinkage. In: Construction and Building Materials, v. 229 (Dezember 2019).
- (2019): RILEM TC 247-DTA round robin test: mix design and reproducibility of compressive strength of alkali-activated concretes. In: Materials and Structures, v. 52, n. 5 (20 August 2019).
- (2016): Prediction of early-age creep and cracking age of concrete: a proposed modification for AS3600 provisions. In: Australian Journal of Structural Engineering, v. 17, n. 4 (Dezember 2016).
- (2019): Modelling non-isothermal chloride ingress in unsaturated cement-based materials. In: Construction and Building Materials, v. 217 (August 2019).
- (2001): Modèle de comportement mécanique des poutres en béton armé après fissuration. In: Revue française de Génie civil, v. 5, n. 5 (August 2001).
- (2016): Modeling Steel Concrete Bond Strength Reduction Due to Corrosion. In: ACI Structural Journal, v. 113, n. 5 (September 2016).
- (2016): Prediction of the steel-concrete bond strength from the compressive strength of Portland cement and geopolymer concretes. In: Construction and Building Materials, v. 119 (August 2016).
- (2018): A New Approach to Modeling Tension Stiffening in Reinforced Concrete. In: ACI Structural Journal, v. 115, n. 1 (Januar 2018).
- (2011): Repairing corroded RC beam with near-surface mounted CFRP rods. In: Materials and Structures, v. 44, n. 7 (August 2011).
- (2015): Reinforced Concrete Beams Strengthened with NSM CFRP Rods in Shear. In: Advances in Structural Engineering, v. 18, n. 10 (November 2015).
- (2012): Response of corroded prestressed beams with bonded strands. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 165, n. 5 (Mai 2012).
- (2018): Spacing of Cracks in Reinforced Concrete Based on a Variable Transfer Length Model. In: Journal of Structural Engineering (ASCE), v. 144, n. 7 (Juli 2018).
- (2016): Modeling the tensile steel reinforcement strain in RC-beams subjected to cycles of loading and unloading. In: Engineering Structures, v. 126 (November 2016).
- (2018): On the Reliability of Serviceability Calculations for Flexural Cracked Reinforced Concrete Beams. In: Structures, v. 13 (Februar 2018).
- (2009): Modelling the response of prestressed beams with corroded reinforcement. In: European Journal of Environmental and Civil Engineering, v. 13, n. 6 (Juli 2009).
- (2013): Modelling of flexural behaviour of RC beams strengthened with NSM CFRP rods including serviceability. In: European Journal of Environmental and Civil Engineering, v. 17, n. 7 (Juli 2013).
- (2018): Performance-based criteria to assess the suitability of geopolymer concrete in marine environments using modified ASTM C1202 and ASTM C1556 methods. In: Materials and Structures, v. 51, n. 6 (Dezember 2018).
- (2018): Precision of cement hydration heat models in capturing the effects of SCMs and retarders. In: Magazine of Concrete Research, v. 70, n. 23 (Dezember 2018).
- (2001): Prédiction du comportement mécanique des ouvrages en béton armé dégradés par corrosion des armatures. In: Travaux, n. 772 (Februar 2001).
Structurae kooperiert mit
